- 30 11月, 2005 9 次提交
-
-
由 Adrian Bunk 提交于
This patch contains the following possible cleanups: - every file should #include the headers containing the prototypes for it's global functions - make needlessly global functions static Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Richard Purdie 提交于
Update the pre-CFI Sharp driver sharps.c so it compiles. map_read32 / map_write32 no longer exist in the kernel so the driver is totally broken as it stands. The replacement functions use different parameters resulting in the other changes. Change collie to use this driver until someone works out why the cfi driver fails on that machine. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Tested-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Remove disfunctional driver, which slipped through the review mechanism Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Luiz Capitulino 提交于
The patch below fixes the following sparse warning: drivers/mtd/maps/nettel.c:482:27: warning: Using plain integer as NULL pointer Signed-off-by: NLuiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David Woodhouse 提交于
arjan: drivers/mtd/maps/sc520cdp.c:167: warning: par_table is never written to and should be declared 'const' arjan: drivers/mtd/maps/pci.c:105: warning: mtd_pci_map is never written to and should be declared 'const' arjan: mind fixing those up ? Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 John Bowler 提交于
ixp4xx updates: - Handle reads that don't start on a half-word boundary. - Make it work when CPU is in little-endian mode. Signed-off-by: NJohn Bowler <jbowler@acm.org> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NDavid Vrabel <dvrabel@arcom.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Todd Poynor 提交于
Recent models of Intel/Sharp and Spansion CFI flash now have significant bits in the upper byte of device ID codes, read via what Spansion calls "autoselect" and Intel calls "read device identifier". Currently these values are truncated to the low 8 bits in the mtd data structures, as all CFI read query info has previously been read one byte at a time. Add a new method for reading 16-bit info, currently just manufacturer and device codes; datasheets hint at future uses for upper bytes in other fields. Signed-off-by: NTodd Poynor <tpoynor@mvista.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Maciej W. Rozycki 提交于
Merge from linux-mips: Use physical addresses at the interface level, letting drivers remap them as appropriate. Signed-off-by: NMaciej W. Rozycki <macro@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 29 11月, 2005 31 次提交
-
-
由 Thomas Gleixner 提交于
JFFS2 initialize f->sem mutex as "locked" in the slab constructor which is a bug. Objects are freed with unlocked f->sem mutex. So, when they allocated again, f->sem is unlocked because the slab cache constructor is not called for them. The constructor is called only once when memory pages are allocated for objects (namely, when the slab layer allocates new slabs). So, sometimes 'struct jffs2_inode_info' are allocated with unlocked f->sem, sometimes with locked. This is a bug. Instead, initialize f->sem as unlocked in the constructor. I.e., in the "constructed" state f->sem must be unlocked. From: Keijiro Yano <keijiro_yano@yahoo.co.jp> Acked-by: NArtem B. Bityutskiy <dedekind@infradead.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Sean Young 提交于
A major block device number is now assigned by lanana. Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Miklos Szeredi 提交于
Check for invalid node ID values in the new atomic create+open method. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Miklos Szeredi 提交于
Check the created directory inode for aliases in the mkdir() method. Signed-off-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrea Arcangeli 提交于
With Andrew Morton <akpm@osdl.org> The slab scanning code tries to balance the scanning rate of slabs versus the scanning rate of LRU pages. To do this, it retains state concerning how many slabs have been scanned - if a particular slab shrinker didn't scan enough objects, we remember that for next time, and scan more objects on the next pass. The problem with this is that with (say) a huge number of GFP_NOIO direct-reclaim attempts, the number of objects which are to be scanned when we finally get a GFP_KERNEL request can be huge. Because some shrinker handlers just bail out if !__GFP_FS. So the patch clamps the number of objects-to-be-scanned to 2* the total number of objects in the slab cache. Signed-off-by: NAndrea Arcangeli <andrea@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Kara 提交于
When quota file specified in mount options did not exist, we tried to dereference NULL pointer later. Fix it. Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
If you have an array with a write-intent-bitmap, and you remove a device, then re-add it, a full recovery isn't needed. We detect a re-add by looking at saved_raid_disk. For raid1, it doesn't matter which disk it was, only whether or not it was an active device. The old code being removed set a value of 'mirror' which was then ignored, so it can go. The changed code performs the correct check. For raid6, if there are two missing devices, make sure we chose the right slot on --re-add rather than always the first slot. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
If an array is created using set_array_info, default_bitmap_offset isn't set properly meaning that an internal bitmap cannot be hot-added until the array is stopped and re-assembled. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
When doing a recovery, we need to know whether the array will still be degraded after the recovery has finished, so we can know whether bits can be clearred yet or not. This patch performs the required check. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
bitmap_unplug actually writes data (bits) to storage, so we shouldn't be holding a spinlock... Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
raid10 has two different layouts. One uses near-copies (so multiple copies of a block are at the same or similar offsets of different devices) and the other uses far-copies (so multiple copies of a block are stored a greatly different offsets on different devices). The point of far-copies is that it allows the first section (normally first half) to be layed out in normal raid0 style, and thus provide raid0 sequential read performance. Unfortunately, the read balancing in raid10 makes some poor decisions for far-copies arrays and you don't get the desired performance. So turn off that bad bit of read_balance for far-copies arrays. With this patch, read speed of an 'f2' array is comparable with a raid0 with the same number of devices, though write speed is ofcourse still very slow. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Krufky 提交于
Repair broken build configuration for hybrid v4l/dvb card frontend selection. Signed-off-by: NMichael Krufky <mkrufky@m1k.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rik van Riel 提交于
Some users (hi Zwane) have seen a problem when running a workload that eats nearly all of physical memory - th system does an OOM kill, even when there is still a lot of swap free. The problem appears to be a very big task that is holding the swap token, and the VM has a very hard time finding any other page in the system that is swappable. Instead of ignoring the swap token when sc->priority reaches 0, we could simply take the swap token away from the memory hog and make sure we don't give it back to the memory hog for a few seconds. This patch resolves the problem Zwane ran into. Signed-off-by: NRik van Riel <riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Latchesar Ionkov 提交于
Assign the appropriate dentry operations to the dentry. Fixes memory leak. Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Jackson 提交于
Move the cpuset_fork() call below the write_unlock_irq call in kernel/fork.c copy_process(). Since the cpuset-dual-semaphore-locking-overhaul.patch, the cpuset_fork() routine acquires task_lock(), so cannot be called while holding the tasklist_lock for write. Signed-off-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Nick Piggin 提交于
I believe this patch is required to fix breakage in the asynch reclaim watermark logic introduced by this patch: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=7fb1d9fca5c6e3b06773b69165a73f3fb786b8ee Just some background of the watermark logic in case it isn't clear... Basically what we have is this: --- pages_high | | (a) | --- pages_low | | (b) | --- pages_min | | (c) | --- 0 Now when pages_low is reached, we want to kick asynch reclaim, which gives us an interval of "b" before we must start synch reclaim, and gives kswapd an interval of "a" before it need go back to sleep. When pages_min is reached, normal allocators must enter synch reclaim, but PF_MEMALLOC, ALLOC_HARDER, and ALLOC_HIGH (ie. atomic allocations, recursive allocations, etc.) get access to varying amounts of the reserve "c". Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: "Seth, Rohit" <rohit.seth@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
This patch corrects the return value for the EXT3_IOC_GROUP_ADD in case it fails due to the presence of multiple resizers at the filesystem. The problem is a little bit more serious than a wrong return value in this case, since the clause err=0 in the exit_journal path will lead to a call to update_backups which in turns causes a NULL pointer dereference. Signed-off-by: NGlauber de Oliveira Costa <glommer@br.ibm.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hirokazu Takata 提交于
This patch is for supporting IDE interface for M3A-2170(Mappi-III) board. Signed-off-by: NMamoru Sakugawa <sakugawa@linux-m32r.org> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hirokazu Takata 提交于
Introduce atomic_cmpxchg and atomic_inc_not_zero operations for m32r. Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hirokazu Takata 提交于
This patch fixes a deadlock problem of the m32r SMP kernel. In the m32r kernel, sys_tas() system call is provided as a test-and-set function for userspace, for backward compatibility. In some multi-threading application program, deadlocks were rarely caused at sys_tas() funcion. Such a deadlock was caused due to a collision of __pthread_lock() and __pthread_unlock() operations. The "tas" syscall is repeatedly called by pthread_mutex_lock() to get a lock, while a lock variable's value is not 0. On the other hand, pthead_mutex_unlock() sets the lock variable to 0 for unlocking. In the previous implementation of sys_tas() routine, there was a possibility that a unlock operation was ignored in the following case: - Assume a lock variable (*addr) was equal to 1 before sys_tas() execution. - __pthread_unlock() operation is executed by the other processor and the lock variable (*addr) is set to 0, between a read operation ("oldval = *addr;") and the following write operation ("*addr = 1;") during a execution of sys_tas(). In this case, the following write operation ("*addr = 1;") overwrites the __pthread_unlock() result, and sys_tas() fails to get a lock in the next turn and after that. According to the attatched patch, sys_tas() returns 0 value in the next turn and deadlocks never happen. Signed-off-by: NHitoshi Yamamoto <Yamamoto.Hitoshi@ap.MitsubishiElectric.co.jp> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Collins 提交于
Tracked this down on an Ultra Enterprise 3000. It's a 6-way machine. Odd thing about this machine (and it's good for finding bugs like this) is that the CPU id's are not 0 based. For instance, on my machine the CPU's are 6/7/10/11/14/15. This caused some NULL pointer dereference in kernel/workqueue.c because for single_threaded workqueue's, it hardcoded the cpu to 0. I changed the 0's to any_online_cpu(cpu_online_mask), which cpumask.h claims is "First cpu in mask". So this fits the same usage. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
fix 32bit overflow in timespec_to_sample() Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Chris Humbert 提交于
genalloc improperly stores the sizes of freed chunks, allocates overlapping memory regions, and oopses after its in-band data is overwritten. Signed-off-by: NChris Humbert <mahadri-kernel@drigon.com> Cc: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Drokin 提交于
I now see another overflow in reiserfs that should lead to data corruptions with files that are bigger than 4G under certain circumstances when using mmap. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Remove bogus usage of test/set_bit() from fbcon rotation code and just manipulate the bits directly. This fixes an oops on powerpc among others and should be faster. Seems to work fine on the G5 here. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Howells 提交于
The attached patch implements a bunch of small changes to the FRV arch to make it work again. It deals with the following problems: (1) SEM_DEBUG should be SEMAPHORE_DEBUG. (2) The argument list to pcibios_penalize_isa_irq() has changed. (3) CONFIG_HIGHMEM can't be used directly in #if as it may not be defined. (4) page->private is no longer directly accessible. (5) linux/hardirq.h assumes asm/hardirq.h will include linux/irq.h (6) The IDE MMIO access functions are given pointers, not integers, and so get type casting errors. (7) __pa() is passed an explicit u64 type in drivers/char/mem.c, but that can't be cast directly to a pointer on a 32-bit platform. (8) SEMAPHORE_DEBUG should not be contingent on WAITQUEUE_DEBUG as that no longer exists. (9) PREEMPT_ACTIVE is too low a value. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew Morton 提交于
Don't do that - it does GFP_KERNEL allocations, for a start. (Reported by Guillaume Thouvenin <guillaume.thouvenin@bull.net>) Acked-by: NMatt Helsley <matthltc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-