- 17 8月, 2005 1 次提交
-
-
由 Stephen Rothwell 提交于
Paulus suggested that we put xLparMap in its own .c file so that we can generate a .s file to be included into head.S. This doesn't get around the problem of having it at a fixed address, but it makes it more palatable. It would be good if this could be included in 2.6.13 as it solves our build problems with various versions of binutils and gcc. In particular, it allows us to build an iSeries kernel on Debian unstable using their biarch compiler. This has been built and booted on iSeries and built for pSeries and g5. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 8月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The workaround for broken device-tree that prevents fan control from working on recent G5 models need to be "enabled" for machines with revision 0x37 of the bridge in addition to machines with revision 0x35. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 8月, 2005 3 次提交
-
-
由 Dominik Brodowski 提交于
In yenta_socket, we default to using the resource setting of the CardBus bridge. However, this is a PCI-bus-centric view of resources and thus needs to be converted to generic resources first. Therefore, add a call to pcibios_bus_to_resource() call in between. This function is a mere wrapper on x86 and friends, however on some others it already exists, is added in this patch (alpha, arm, ppc, ppc64) or still needs to be provided (parisc -- where is its pcibios_resource_to_bus() ?). Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
The kexec boot is not successful on some power machines since all CPUs are getting removed from global interrupt queue (GIQ) before kexec boot. Some systems always expect at least one CPU in GIQ. Hence, this patch will make sure that only secondary CPUs are removed from GIQ. Signed-off-by: NHaren Myneni <hbabu@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olof Johansson 提交于
CONFIG_KEXEC breaks UP builds because of a misspelled smp_release_cpus(). Also, the function isn't defined unless built with CONFIG_SMP but it is needed if we are to go from a UP to SMP kernel. Enable it and document it. Thanks to Steven Winiecki for reporting this and to Milton for remembering how it's supposed to work and why. Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 02 8月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The code that sets the altivec capability of the CPU based on firmware informations can enable altivec when the kernel has CONFIG_ALTIVEC disabled. This results in "interesting" crashes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 7月, 2005 1 次提交
-
-
由 Robert Love 提交于
inotify system call support for PPC64 [ I don't think we need sys32 compatibility versions--and if we do, I failed in life. ] Signed-off-by: NRobert Love <rml@novell.com> Acked-by: NPaul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 7月, 2005 4 次提交
-
-
由 Olaf Hering 提交于
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
Presently the LparMap, one of the structures the kernel shares with the legacy iSeries hypervisor has a fixed offset address in head.S. This patch changes this so the LparMap is a normally initialized structure, without fixed address. This allows us to use macros to compute some of the values in the structure, which wasn't previously possible because the assembler always uses signed-% which gets the wrong answers for the computations in question. Unfortunately, a gcc bug means that doing this requires another structure (hvReleaseData) to be initialized in asm instead of C, but on the whole the result is cleaner than before. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
PPC64 machines before Power4 need a segment table page allocated for each CPU. Currently these are allocated statically in a big array in head.S for all CPUs. The segment tables need to be in the first segment (so do_stab_bolted doesn't take a recursive fault on the stab itself), but other than that there are no constraints which require the stabs for the secondary CPUs to be statically allocated. This patch allocates segment tables dynamically during boot, using lmb_alloc() to ensure they are within the first 256M segment. This reduces the kernel image size by 192k... Tested on RS64 iSeries, POWER3 pSeries, and POWER5. Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
Making a few functions static saves a few bytes, but only on ppc32. text data bss dec hex filename 3752421 1605208 345608 5703237 570645 ../O-ppc64_iSeries_defconfig/vmlinux 3709411 2042552 339992 6091955 5cf4b3 ../O-ppc64_maple_defconfig/vmlinux 5397329 3054824 679856 9132009 8b57e9 ../O-ppc64_pSeries_defconfig/vmlinux -3882695 417552 197760 4498007 44a257 ../O-ppc_common_defconfig/vmlinux -3414510 574500 241440 4230450 408d32 ../O-ppc_pmac_defconfig/vmlinux +3882627 417168 197760 4497555 44a093 ../O-ppc_common_defconfig/vmlinux +3414442 575428 241440 4231310 40908e ../O-ppc_pmac_defconfig/vmlinux Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 7月, 2005 1 次提交
-
-
由 Eric W. Biederman 提交于
machine_restart, machine_halt and machine_power_off are machine specific hooks deep into the reboot logic, that modules have no business messing with. Usually code should be calling kernel_restart, kernel_halt, kernel_power_off, or emergency_restart. So don't export machine_restart, machine_halt, and machine_power_off so we can catch buggy users. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 7月, 2005 2 次提交
-
-
由 Olof Johansson 提交于
Add PVR value and tests for 970MP. Also switch to a simpler (but slightly longer) check at init time for simplicity. Signed-off-by: NOlof Johansson <olof@austin.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Gibson 提交于
This patch removes the use of bitfield types from the ppc64 hash table manipulation code. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 7月, 2005 20 次提交
-
-
由 Anton Blanchard 提交于
We dont need to use the PERFMON exception on POWER5, in fact the firmware returns an error. Due to this just remove the warning. Also now that we have proper runlatch support we can remove the bootup hack. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Ellerman 提交于
Not sure if we really need this, but it was handy to know which iSeries loop I was testing. Be consistent about printing which idle loop we're using, with this patch we cover all cases. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
Fix a compile warning introduced by the previous patches. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
- remove some unnecessary includes - add runlatch support - no need to use raw_smp_processor_id any more, current preempt debug logic checks for processes that are bound to one cpu. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
- separate out sleep logic in dedicated_idle, it was so far indented that it got squashed against the right side of the screen. - add runlatch support, looping on runlatch disable. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
- remove min/max yield time, we dont use the values anywhere - separate shared and dedicated idle loops - check need_resched again with irqs off to avoid sleeping with pending work - continually set runlatch off in idle loop, this means we dont need to turn the runlatch off on exception exit and suffer that associated cost for all exceptions. (A future patch will turn the runlatch on at exception entry) Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Ellerman 提交于
Now that the idle loop is configured by each platform we don't need idle_setup() anymore. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Ellerman 提交于
This patch fixes up iSeries, pSeries, pmac and maple to set the correct idle function for each platform. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Ellerman 提交于
dedicated_idle() and shared_idle() are only used by pSeries, so move them into pSeries_setup.c Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Ellerman 提交于
Move iSeries_idle() into iSeries_setup.c, no one else needs to know about it. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Ellerman 提交于
This patch adds an idle member to the ppc_md structure and calls it from cpu_idle(). If a platform leaves ppc_md.idle as null it will get the default idle loop default_idle(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Milton Miller 提交于
Separate the NUL character filtering from get_hvc_chars. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Milton Miller 提交于
Remove all the vio device driver code from hvc_console.c This will allow us to separate hvsi, hvc, and allow hvc_console to be used without the ppc64 vio layer. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Milton Miller 提交于
Separate the console setup routines of the hvc_console and the vio layer. Remove the call to find_init_vty from hvc_console.c. Fail the setup routine if the console doesn't exist, but register the console again when the specified channel is instantiated. This scheme maintains the print buffer semantics while eliminating callout and call back for the console code. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
- Clean up sys32_getpriority comment. - Add ioprio syscalls, and sign extend 32bit versions. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
Remove some unnecessary includes, an out of date comment and a prototype for sys_timer_create (which is now in syscalls.h) Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
Enable the runlatch at the start of each exception. Unfortunately we are out of space in the 0x300 handler, so I added it a bit later. The SPR write is fairly expensive, perhaps we should cache the runlatch state in the paca and avoid the write when possible. We don't need to turn the runlatch off, we do that in the idle loop. Better to take the hit in the idle loop than for each exception exit. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
Not all ppc64 CPUs have the CTRL SPR, so we need a cputable feature for it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anton Blanchard 提交于
Use c99 initialisers in the cputable code. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olaf Hering 提交于
Patch from <amodra@bigpond.net.au>, http://sources.redhat.com/bugzilla/show_bug.cgi?id=1042 /usr/bin/ld: arch/ppc64/kernel/vdso32/vdso32.so: The first section in the PT_DYNAMIC segment is not the .dynamic section Signed-off-by: NOlaf Hering <olh@suse.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 7月, 2005 1 次提交
-
-
由 Jeff Mahoney 提交于
This converts the usage of struct of_match to struct of_device_id, similar to pci_device_id. This allows a device table to be generated, which can be parsed by depmod(8) to generate a map file for module loading. In order for hotplug to work with macio devices, patches to module-init-tools and hotplug must be applied. Those patches are available at: ftp://ftp.suse.com/pub/people/jeffm/linux/macio-hotplug/Signed-off-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 7月, 2005 1 次提交
-
-
由 Rusty Lynch 提交于
The following renames arch_init, a kprobes function for performing any architecture specific initialization, to arch_init_kprobes in order to cleanup the namespace. Also, this patch adds arch_init_kprobes to sparc64 to fix the sparc64 kprobes build from the last return probe patch. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 6月, 2005 4 次提交
-
-
由 Michael Ellerman 提交于
The hvlpevent_queue (formally ItLpQueue) has a member called xInUseWord which is used for serialising access to the queue. Because it's a word (ie. 32 bit) there's a custom 32-bit version of test_and_set_bit() or thereabouts in ItLpQueue.c. The xInUseWord is not shared with they hypervisor, so we can replace it with a spinlock and remove the custom code. There is also another locking mechanism (ItLpQueueInProcess). This is redundant because it's only manipulated while the lock's held. Remove it. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Just formatting cleanups: * rename some "nextLpEvent" variables to just "event" * make code fit in 80 columns * use brackets around if/else * use a temporary to make hvlpevent_clear_valid clearer Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Just cleanup white space. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The code that prints event counts by type uses a hand-coded number of tabs to get the alignment right. Instead use a printf alignment which will allow allow us to use the event_type strings elsewhere in the future. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-