In function pc300_pci_init_one(), on the ioremap error path, function
pc300_pci_remove_one() is called to free the allocated memory. However,
the path is not terminated, and the freed memory will be used later,
resulting in use-after-free bugs. This path fixes the bug.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function nlmsg_new() will return a NULL pointer if there is no enough
memory, and its return value should be checked before it is used.
However, in function tipc_nl_node_get_monitor(), the validation of the
return value of function nlmsg_new() is missed. This patch fixes the
bug.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function nla_nest_start() may return a NULL pointer on error. However,
in function lwtunnel_fill_encap(), the return value of nla_nest_start()
is not validated before it is used. This patch checks the return value
of nla_nest_start() against NULL.
Signed-off-by: NPan Bian <bianpan2016@163.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: DMA flags, adjust head and fixes

This series takes advantage of Alex's DMA_ATTR_SKIP_CPU_SYNC to make
XDP packet modifications "correct" from DMA API point of view.  It
also allows us to parse the metadata before we run XDP at no additional
DMA sync cost.  That way we can get rid of the metadata memcpy, and
remove the last upstream user of bpf_prog->xdp_adjust_head.

David's patch adds a way to read capabilities from the management
firmware.

There are also two net-next fixes.  Patch 4 which fixes what seems to
be a result of a botched rebase on my part.  Patch 5 corrects locking
when state of ethernet ports is being refreshed.

v3: move the sync from alloc func to the actual give to hw func
v2: sync rx buffers before giving them to the card (Alex)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code refreshing the eth port state was trying to update state
of all ports of the card.  Unfortunately to safely walk the port
list we would have to hold the port lock, which we can't due to
lock ordering constraints against rtnl.

Make the per-port sync refresh and async refresh of all ports
completely separate routines.

Fixes: 172f638c ("nfp: add port state refresh")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

XDP headroom should not be included in free list buffer size.

Fixes: 6fe0c3b4 ("nfp: add support for xdp_adjust_head()")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Retrieve identifying information from the NSP.  For now it only
contains versions of firmware subcomponents.
Signed-off-by: NDavid Brunecz <david.brunecz@netronome.com>
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Calling memcpy to shift metadata out of the way for XDP to run
seems like an overkill.  The most common metadata contents are
8 bytes containing type and flow hash.  Simply parse the metadata
before we run XDP.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DMA unmap may destroy changes CPU made to the buffer.  To make XDP
run correctly on non-x86 platforms we should use the
DMA_ATTR_SKIP_CPU_SYNC attribute.

Thanks to using the attribute we can now push the sync operation to the
common code path from XDP handler.

A little bit of variable name reshuffling is required to bring the
code back to readable state.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Benjamin LaHaise says:

====================
flower: add MPLS matching support

This patch series adds support for parsing MPLS flows in the flow dissector
and the flower classifier.  Each of the MPLS TTL, BOS, TC and Label fields
can be used for matching.

v2: incorporate style feedback, move #defines to linux/include/mpls.h
Note: this omits Jiri's request to remove tabs between the type and
field names in struct declarations.  This would be inconsistent with
numerous other struct definitions.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support to the tc flower classifier to match based on fields in MPLS
labels (TTL, Bottom of Stack, TC field, Label).
Signed-off-by: NBenjamin LaHaise <benjamin.lahaise@netronome.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Cc: Gao Feng <fgao@ikuai8.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for parsing MPLS flows to the flow dissector in preparation for
adding MPLS match support to cls_flower.
Signed-off-by: NBenjamin LaHaise <benjamin.lahaise@netronome.com>
Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Simon Horman <simon.horman@netronome.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Eric Dumazet <jhs@mojatatu.com>
Cc: Hadar Hen Zion <hadarh@mellanox.com>
Cc: Gao Feng <fgao@ikuai8.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wei Wang says:

====================
net/tcp_fastopen: Fix for various TFO firewall issues

Currently there are still some firewall issues in the middlebox
which make the middlebox drop packets silently for TFO sockets.
This kind of issue is hard to be detected by the end client.

This patch series tries to detect such issues in the kernel and disable
TFO temporarily.
More details about the issues and the fixes are included in the following
patches.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Christoph Paasch from Apple found another firewall issue for TFO:
After successful 3WHS using TFO, server and client starts to exchange
data. Afterwards, a 10s idle time occurs on this connection. After that,
firewall starts to drop every packet on this connection.

The fix for this issue is to extend existing firewall blackhole detection
logic in tcp_write_timeout() by removing the mss check.
Signed-off-by: NWei Wang <weiwan@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This counter records the number of times the firewall blackhole issue is
detected and active TFO is disabled.
Signed-off-by: NWei Wang <weiwan@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Middlebox firewall issues can potentially cause server's data being
blackholed after a successful 3WHS using TFO. Following are the related
reports from Apple:
https://www.nanog.org/sites/default/files/Paasch_Network_Support.pdf
Slide 31 identifies an issue where the client ACK to the server's data
sent during a TFO'd handshake is dropped.
C ---> syn-data ---> S
C <--- syn/ack ----- S
C (accept & write)
C <---- data ------- S
C ----- ACK -> X     S
		[retry and timeout]

https://www.ietf.org/proceedings/94/slides/slides-94-tcpm-13.pdf
Slide 5 shows a similar situation that the server's data gets dropped
after 3WHS.
C ---- syn-data ---> S
C <--- syn/ack ----- S
C ---- ack --------> S
S (accept & write)
C?  X <- data ------ S
		[retry and timeout]

This is the worst failure b/c the client can not detect such behavior to
mitigate the situation (such as disabling TFO). Failing to proceed, the
application (e.g., SSL library) may simply timeout and retry with TFO
again, and the process repeats indefinitely.

The proposed solution is to disable active TFO globally under the
following circumstances:
1. client side TFO socket detects out of order FIN
2. client side TFO socket receives out of order RST

We disable active side TFO globally for 1hr at first. Then if it
happens again, we disable it for 2h, then 4h, 8h, ...
And we reset the timeout to 1hr if a client side TFO sockets not opened
on loopback has successfully received data segs from server.
And we examine this condition during close().

The rational behind it is that when such firewall issue happens,
application running on the client should eventually close the socket as
it is not able to get the data it is expecting. Or application running
on the server should close the socket as it is not able to receive any
response from client.
In both cases, out of order FIN or RST will get received on the client
given that the firewall will not block them as no data are in those
frames.
And we want to disable active TFO globally as it helps if the middle box
is very close to the client and most of the connections are likely to
fail.

Also, add a debug sysctl:
  tcp_fastopen_blackhole_detect_timeout_sec:
    the initial timeout to use when firewall blackhole issue happens.
    This can be set and read.
    When setting it to 0, it means to disable the active disable logic.
Signed-off-by: NWei Wang <weiwan@google.com>
Acked-by: NYuchung Cheng <ycheng@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2017-04-22

Sparse and compiler warnings fixes from Stephen Hemminger.

From Roi Dayan and Or Gerlitz, Add devlink and mlx5 support for controlling
E-Switch encapsulation mode, this knob will enable HW support for applying
encapsulation/decapsulation to VF traffic as part of SRIOV e-switch offloading.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

systemd-sysctl is triggering a suspicious RCU usage message when
net.ipv4.tcp_early_demux or net.ipv4.udp_early_demux is changed via
a sysctl config file:

[   33.896184] ===============================
[   33.899558] [ ERR: suspicious RCU usage.  ]
[   33.900624] 4.11.0-rc7+ #104 Not tainted
[   33.901698] -------------------------------
[   33.903059] /home/dsa/kernel-2.git/net/ipv4/sysctl_net_ipv4.c:305 suspicious rcu_dereference_check() usage!
[   33.905724]
other info that might help us debug this:

[   33.907656]
rcu_scheduler_active = 2, debug_locks = 0
[   33.909288] 1 lock held by systemd-sysctl/143:
[   33.910373]  #0:  (sb_writers#5){.+.+.+}, at: [<ffffffff8123a370>] file_start_write+0x45/0x48
[   33.912407]
stack backtrace:
[   33.914018] CPU: 0 PID: 143 Comm: systemd-sysctl Not tainted 4.11.0-rc7+ #104
[   33.915631] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014
[   33.917870] Call Trace:
[   33.918431]  dump_stack+0x81/0xb6
[   33.919241]  lockdep_rcu_suspicious+0x10f/0x118
[   33.920263]  proc_configure_early_demux+0x65/0x10a
[   33.921391]  proc_udp_early_demux+0x3a/0x41

add rcu locking to proc_configure_early_demux.

Fixes: dddb64bc ("net: Add sysctl to toggle early demux for tcp and udp")
Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2017-04-22

Here are some more Bluetooth patches (and one 802.15.4 patch) in the
bluetooth-next tree targeting the 4.12 kernel. Most of them are pure
fixes.

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in dev_err message and rejoin
line.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use offset_in_page() macro instead of open-coding.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Updates for net-next.

Miscellaneous updates include passing DCBX RoCE VLAN priority to firmware,
checking one more new firmware flag before allowing DCBX to run on the host,
adding 100Gbps speed support, adding check to disallow speed settings on
Multi-host NICs, and a minor fix for reporting VF attributes.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change restricts the PF in multi-host mode from setting any port
level PHY configuration.  The settings are controlled by firmware in
Multi-Host mode.
Signed-off-by: NDeepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check the additional flag in bnxt_hwrm_func_qcfg() before allowing
DCBX to be done in host mode.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added support for 100G link speed reporting for Broadcom BCM57454
ASIC in ethtool command.
Signed-off-by: NDeepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: NRay Jui <ray.jui@broadcom.com>
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The .ndo_get_vf_config() is returning the wrong qos attribute.  Fix
the code that checks and reports the qos and spoofchk attributes.  The
BNXT_VF_QOS and BNXT_VF_LINK_UP flags should not be set by default
during init. time.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the driver gets the RoCE app priority set/delete call through DCBNL,
the driver will send the information to the firmware to set up the
priority VLAN tag for RDMA traffic.

[ New version using the common ETH_P_IBOE constant in if_ether.h ]
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new optional conntrack action attribute OVS_CT_ATTR_EVENTMASK,
which can be used in conjunction with the commit flag
(OVS_CT_ATTR_COMMIT) to set the mask of bits specifying which
conntrack events (IPCT_*) should be delivered via the Netfilter
netlink multicast groups.  Default behavior depends on the system
configuration, but typically a lot of events are delivered.  This can be
very chatty for the NFNLGRP_CONNTRACK_UPDATE group, even if only some
types of events are of interest.

Netfilter core init_conntrack() adds the event cache extension, so we
only need to set the ctmask value.  However, if the system is
configured without support for events, the setting will be skipped due
to extension not being found.
Signed-off-by: NJarno Rajahalme <jarno@ovn.org>
Reviewed-by: NGreg Rose <gvrose8192@gmail.com>
Acked-by: NJoe Stringer <joe@ovn.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix typo in a comment.
Signed-off-by: NJarno Rajahalme <jarno@ovn.org>
Acked-by: NGreg Rose <gvrose8192@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nathan Fontenot says:

====================
ibmvnic: Additional updates and bug fixes

This set of patches is an additional set of updates and bug fixes to
the ibmvnic driver which applies on top of the previous set of updates
sent out on 4/19.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an error is encountered during transmit we need to free the
skb instead of returning TX_BUSY.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Validate that the napi structs exist before trying to disable them
at driver close.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create a common routine for setting the link state for the vnic adapter.
This update moves the sending of the crq and waiting for the link state
response to a common place. The new routine also adds handling of
resending the crq in cases of getting a partial success response.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should be initializing the stats token in the same place we
initialize the other resources for the driver.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When handling a fatal error in the driver, there can be additional
error information provided by the vios. This information is not
always present, so only retrieve the additional error information
when present.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch addresses a modification in the PAPR+ specification which now
defines a previously reserved value for vNIC capabilities. It indicates
whether the system firmware performs a VLAN header stripping on all VLAN
tagged received frames, in case it does, the behavior expected is for
the ibmvnic driver to be responsible for inserting the VLAN header.
Reported-by: NManvanthara B. Puttashankar <mputtash@in.ibm.com>
Signed-off-by: NMurilo Fossa Vicentini <muvic@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Along with 5 TX queues, 5 RX queues are allocated at the beginning of
device probe. However, only the real number of TX queues is set. Configure
the real number of RX queues as well.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Mike Maloney says:

====================
packet: Add option to create new fanout group with unique id.

Fanout uses a per net global namespace. A process that intends to create a
new fanout group can accidentally join an existing group. It is
not possible to detect this.

Add a socket option to specify on the first call to
setsockopt(..., PACKET_FANOUT, ...) to ensure that a new group is created.
Also add tests.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Create two groups with PACKET_FANOUT_FLAG_UNIQUEID, add a socket to one.
Ensure that the groups can only be joined if all options are consistent
with the original except for this flag.
Signed-off-by: NMike Maloney <maloney@google.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fanout uses a per net global namespace. A process that intends to create
a new fanout group can accidentally join an existing group. It is not
possible to detect this.

Add socket option PACKET_FANOUT_FLAG_UNIQUEID.  When specified the
supplied fanout group id must be set to 0, and the kernel chooses an id
that is not already in use.  This is an ephemeral flag so that
other sockets can be added to this group using setsockopt, but NOT
specifying this flag.  The current getsockopt(..., PACKET_FANOUT, ...)
can be used to retrieve the new group id.

We assume that there are not a lot of fanout groups and that this is not
a high frequency call.

The method assigns ids starting at zero and increases until it finds an
unused id.  It keeps track of the last assigned id, and uses it as a
starting point to find new ids.
Signed-off-by: NMike Maloney <maloney@google.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>