- 29 9月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
We want to be able to pass on the information that the page was not dirtied under a lock. Instead of adding a flag parameter, do this by passing a pointer to a 'struct nfs_lock_owner' that may be NULL. Also reuse this structure in struct nfs_lock_context to carry the fl_owner_t and pid_t. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 17 8月, 2012 1 次提交
-
-
由 bjschuma@gmail.com 提交于
Some systems have a modprobe.d/nfs.conf file that sets an nfs4 alias pointing to nfs.ko, rather than nfs4.ko. This can prevent the v4 module from loading on mount, since the kernel sees that something named "nfs4" has already been loaded. To work around this, I've renamed the modules to "nfsv2.ko" "nfsv3.ko" and "nfsv4.ko". I also had to move the nfs4_fs_type back to nfs.ko to ensure that `mount -t nfs4` still works. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 31 7月, 2012 6 次提交
-
-
由 Bryan Schumaker 提交于
This patch exports symbols needed by the v4 module. In addition, I also switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or CONFIG_NFS_V4_MODULE are set. The module (nfs4.ko) will be created in the same directory as nfs.ko and will be automatically loaded the first time you try to mount over NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Otherwise we break backwards compatibility when v4 becomes a modules. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Somehow I missed this in my previous patch series, but these functions are only needed by the v4 code and should be moved to a v4-only file. I wasn't exactly sure where I should put these functions, so I moved them into nfs4super.c where I could make them static. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I'm already looking up the nfs subversion in nfs_fs_mount(), so I have easy access to rpc_ops that used to be difficult to reach. This allows me to set up a different mount path for NFS v2/3 and NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch adds in the code to track multiple versions of the NFS protocol. I created default structures for v2, v3 and v4 so that each version can continue to work while I convert them into kernel modules. I also removed the const parameter from the rpc_version array so that I can change it at runtime. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Randy Dunlap 提交于
Fix numerous repeated warnings by making the stub function void instead of non-void: fs/nfs/nfs4_fs.h: In function 'nfs4_unregister_sysctl': fs/nfs/nfs4_fs.h:385:1: warning: no return statement in function returning non-void Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 7月, 2012 4 次提交
-
-
由 Bryan Schumaker 提交于
This allows me to move the v4 mounting and unmounting functions out of the generic client and into a file that is only compiled when CONFIG_NFS_V4 is enabled. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
And split them out of the generic client into their own file. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I want to initialize all of NFS v4 in a single function that will eventually be used as the v4 module init function. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
The NFS v4 file inode operations are already already in nfs4proc.c, so this patch just needs to move the directory operations to the same file. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 29 6月, 2012 3 次提交
-
-
由 Bryan Schumaker 提交于
This gives pnfs a chance to do a layout commit inside the v4 code. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This gives NFS v4 a way to set up callbacks and sessions without v2 or v3 having to do them as well. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
NFS v4 needs a way to shut down callbacks and sessions, but v2 and v3 don't. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 6月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The open recovery code does not need to request a new value for the mdsthreshold, and so does not allocate a struct nfs4_threshold. The problem is that encode_getfattr_open() will still request an mdsthreshold, and so we end up Oopsing in decode_attr_mdsthreshold. This patch fixes encode_getfattr_open so that it doesn't request an mdsthreshold when the caller isn't asking for one. It also fixes decode_attr_mdsthreshold so that it errors if the server returns an mdsthreshold that we didn't ask for (instead of Oopsing). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com>
-
- 28 5月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Let nfs4_schedule_session_recovery() handle the details of choosing between resetting the session, and other session related recovery. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 27 5月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we destroy our lease on last unmount Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 26 5月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Weston Andros Adamson <dros@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 5月, 2012 2 次提交
-
-
由 Weston Andros Adamson 提交于
The state manager can handle SEQ4_STATUS_CB_PATH_DOWN* flags with a BIND_CONN_TO_SESSION instead of destroying the session and creating a new one. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Weston Andros Adamson 提交于
This patch adds the BIND_CONN_TO_SESSION operation which is needed for upcoming SP4_MACH_CRED work and useful for recovering from broken connections without destroying the session. Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 5月, 2012 3 次提交
-
-
由 Chuck Lever 提交于
nfs4_reset_all_state() refreshes the boot verifier a server sees to trigger that server to wipe this client's state. This function is invoked when an NFSv4.1 server reports that it has revoked some or all of a client's NFSv4 state. To facilitate server trunking discovery, we will eventually want to move the cl_boot_time field to a more global structure. The Uniform Client String model (and specifically, server trunking detection) requires that all servers see the same boot verifier until the client actually does reboot, and not a fresh verifier every time the client unmounts and remounts the server. Without the cl_boot_time field, however, nfs4_reset_all_state() will have to find some other way to force the server to purge the client's NFSv4 state. Because these verifiers are opaque (ie, the server doesn't know or care that they happen to be timestamps), we can force the server to wipe NFSv4 state by updating the boot verifier as we do now, then immediately afterwards establish a fresh client ID using the old boot verifier again. Hopefully there are no extra paranoid server implementations that keep track of the client's boot verifiers and prevent clients from reusing a previous one. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: this structure is unused. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the scope field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April 1 2009. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 15 5月, 2012 1 次提交
-
-
由 Bryan Schumaker 提交于
This function is really getting the root filehandle and not the root dentry of the filesystem. I also removed the rpc_ops lookup from nfs4_get_rootfh() under the assumption that if we reach this function then we already know we are using NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 28 4月, 2012 4 次提交
-
-
由 Bryan Schumaker 提交于
This simplifies the code for v2 and v3 and gives v4 a chance to decide on referrals without needing to modify the generic client. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
And also remove the unneeded rpc_op. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
I create a new proc_lookup_mountpoint() to use when submounting an NFS v4 share. This function returns an rpc_clnt to use for performing an fs_locations() call on a referral's mountpoint. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
Whenever lookup sees wrongsec do a secinfo and retry the lookup to find attributes of the file or directory, such as "is this a referral mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC as part of getattr xdr decoding. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 4月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
The NFSv4 spec is ambiguous about whether or not it is permissible to reuse open owner names, so play it safe. This patch adds a timestamp to the state_owner structure, and combines that with the IDA based uniquifier. Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
It is quite possible for the release_lockowner RPC call to race with the close RPC call, in which case, we cannot dereference lsp->ls_state in order to find the nfs_server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 09 3月, 2012 1 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we select delegation stateids first, then lock stateids and then open stateids. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 3月, 2012 2 次提交
-
-
由 Trond Myklebust 提交于
If a setattr() fails because of an NFS4ERR_OPENMODE error, it is probably due to us holding a read delegation. Ensure that the recovery routines return that delegation in this case. Reported-by: NMiklos Szeredi <miklos@szeredi.hu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-
由 Trond Myklebust 提交于
Otherwise we can end up with sequence id problems if the client reuses the owner_id before the server has processed the release_lockowner Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 06 3月, 2012 5 次提交
-
-
由 Trond Myklebust 提交于
Replace the union with the common struct stateid4 as defined in both RFC3530 and RFC5661. This makes it easier to access the sequence id, which will again make implementing support for parallel OPEN calls easier. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It is really a function for selecting the correct stateid to use in a read or write situation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Change the name to reflect what we're really doing: testing two stateids for whether or not they match according the the rules in RFC3530 and RFC5661. Move the code from callback_proc.c to nfs4proc.c Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
If we know that the delegation stateid is bad or revoked, we need to remove that delegation as soon as possible, and then mark all the stateids that relied on that delegation for recovery. We cannot use the delegation as part of the recovery process. Also note that NFSv4.1 uses a different error code (NFS4ERR_DELEG_REVOKED) to indicate that the delegation was revoked. Finally, ensure that setlk() and setattr() can both recover safely from a revoked delegation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
-