- 13 4月, 2012 2 次提交
-
-
由 Josh Boyer 提交于
A user reported that setting model=imac24 used to allow sound to work on their Mac Pro 5,1 machine. Commit 5671087f "Move ALC885 macpro and imac24 models to auto-parser" removed this model option. All Mac machines are now explicitly handled with a quirk and the auto-parser. This adds a quirk for the device found on the Mac Pro 5,1 machines. This (partially) fixes https://bugzilla.redhat.com/show_bug.cgi?id=808559 [sorted the new entry in the ID number order by tiwai] Reported-by: NGabriel Somlo <somlo@cmu.edu> Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It's compatible with 8930G. Using the same fixup gives the proper 5.1 sound back. Reported-and-tested-by: NDany Martineau <dany.luc.martineau@gmail.com> Cc: <stable@kernel.org> [v3.3+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 4月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Add GPIO1 setup explicitly for Acer Aspire 493x & co. This could be set by alc_auto_init_amp(), but it's safer to set it more explicitly in the fixup table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 4月, 2012 1 次提交
-
-
由 Takashi Iwai 提交于
Since there are still many Acer models that might not be covered by the current fixup table, let's add back a few typical model names so that user can test the fixup without recompiling. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 4月, 2012 3 次提交
-
-
由 Fengguang Wu 提交于
Also remove two warnings when CONFIG_SND_DEBUG is not set: sound/pci/hda/patch_hdmi.c: In function ‘hdmi_intrinsic_event’: sound/pci/hda/patch_hdmi.c:761:6: warning: unused variable ‘eldv’ [-Wunused-variable] sound/pci/hda/patch_hdmi.c:760:6: warning: unused variable ‘pd’ [-Wunused-variable] Signed-off-by: NWu Fengguang <fengguang.wu@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
At the point of this error-handling code, both regions and the dma have been allocated, so free it as done in previous and subsequent error-handling code. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Julia Lawall 提交于
At the point of this error-handling code, HAVE_DSPCODEH may be undefined, so free INITCODE and PERMCODE as done elsewhere. A jump and label are introduced to avoid code duplication. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2012 6 次提交
-
-
由 Michael Karcher 提交于
name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls affecting those pins. remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1 really select MIC1, not Mixer out for recording "Mixer out" for recording is not a "pin", adjust comment Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michael Karcher 提交于
CX20549 (ctx5045) doesn't accept data on index 1 for output pins, as shown in the following hda-var transaction: $ hda-verb /dev/snd/hwC0D0 0x10 set_amp_gain 0xb126 nid = 0x10, verb = 0x300, param = 0xb126 value = 0x0 $ hda-verb /dev/snd/hwC0D0 0x10 get_amp_gain 0x8001 nid = 0x10, verb = 0xb00, param = 0x8001 value = 0x0 Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michael Karcher 提交于
The ID used for detection of the BenQ R55E actually identifies the Quanta TW3 ODM design, which is also used for the Gigabyte W551 laptop series. Schematics on the internet clearly indicate that the "Port C" (analog input connected to record source #4 and mixer input #4) is unconnected. Playing an audio CD through analog playback (using cdplay from cdtools) produces no sound, even with the mixer input labelled "CD" enabled, and the volume control in the CD drive set to maximum. This indicates the connection is really not present. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michael Karcher 提交于
The "input converter" widget of the CX20459 has only one input amplifier, expose that one as "Capture Volume/Capture Switch". The actual record source selection is already exposed through the separately installed input mux. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michael Karcher 提交于
This includes renaming "Line In" to line, also in the mixer settings. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Michael Karcher 提交于
The CX20549 has only one single input amp on it's input converter widget. Fix printing of values in the codec file in /proc/asound. Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 06 4月, 2012 2 次提交
-
-
由 Stephen Warren 提交于
Commit d4a2eca7 "ASoC: Tegra I2S: Remove dependency on pdev->id" changed the prototype of tegra_i2s_debug_add, but didn't update the dummy inline used when !CONFIG_DEBUG_FS. Fix that. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: <stable@vger.kernel.org> # 3.3
-
由 Stephen Warren 提交于
The ASoC core currently defaults to using STANDBY rather than OFF for idle ASoC platform devices, which causes a permanent pm_runtime_get() on them. This keeps the device active unnecessarily. This can be especially problematic when the ASoC platform device and DAI device are the same device. The distinction between OFF and STANDBY is likely not relevant for ASoC platform drivers, since they aren't analog devices. So, solve this issue by hard-coding idle_bias_off = 1 for all ASoC platform devices. If this turns out to be a problem, this value could be sourced from the snd_soc_platform_driver, similarly to soc_probe_codec(). Note: Prior to this change, this caused a large (10) runtime_active count for the Tegra I2S controller even when not in use, and a leak in that value as streams were started and stopped. This change probably hides a bug. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 05 4月, 2012 3 次提交
-
-
由 Fabio Estevam 提交于
Check for NULL pointer before accessing it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Fabio Estevam 提交于
Doing a 'cat /sys/kernel/debug/audmux/ssi7' causes the following oops to be printed by the kernel: Uhandled fault: external abort on non-linefetch (0x008) at 0xf53b003c Internal error: : 8 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.3.0-00033-gecc726e-dirty #307) PC is at audmux_read_file+0x68/0x2f4 LR is at clk_enable+0x3c/0x48 pc : [<c001b8c8>] lr : [<c00190a0>] psr: a0000013 sp : c3ad3f38 ip : c30a4000 fp : 00000003 r10: 00001000 r9 : be83fb00 r8 : c3ad3f80 r7 : c3ad3f80 r6 : 00000007 r5 : 00031010 r4 : c30a5000 r3 : f53b0000 r2 : 0000003c r1 : 380fa100 r0 : c068dda0 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: 83034000 DAC: 00000015 Process cat (pid: 1042, stack limit = 0xc3ad2270) Stack: (0xc3ad3f38 to 0xc3ad4000) 3f20: c3139180 00000000 3f40: c3bc6500 00001000 be83fb00 c3ad3f80 00001000 c3ad2000 00000000 c0095f3c 3f60: 00000003 c3bc6508 c3bc6500 be83fb00 00000000 00000000 00001000 c0096010 3f80: 00000000 00000000 b6fe2050 00000000 00001000 be83fb00 00000003 00000003 3fa0: c000eb88 c000e9e0 00001000 be83fb00 00000003 be83fb00 00001000 00000000 3fc0: 00001000 be83fb00 00000003 00000003 00000001 00000001 00000000 00000003 3fe0: 000bec8c be83fae0 0000f808 b6ea8d5c 60000010 00000003 7dff7ede 749bedf1 [<c001b8c8>] (audmux_read_file+0x68/0x2f4) from [<c0095f3c>] (vfs_read+0xb0/0x144) [<c0095f3c>] (vfs_read+0xb0/0x144) from [<c0096010>] (sys_read+0x40/0x70) [<c0096010>] (sys_read+0x40/0x70) from [<c000e9e0>] (ret_fast_syscall+0x0/0x2c) Code: e1a02186 e2822004 e3500000 e7935186 (e7937002) ---[ end trace 4d046e31309023de ]--- Fix the ssi port numbers in sysfs to fix this problem. Reported-by: NJoan Carles <joancarles@fqingenieria.es> Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Kuninori Morimoto 提交于
ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute. But current settings didn't care +1 step for mute. This patch adds it Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 03 4月, 2012 3 次提交
-
-
由 Martin Jansa 提交于
* fixes sound/soc/pxa/pxa2xx-i2s.c:86:2: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration] sound/soc/pxa/pxa2xx-i2s.c:86:2: error: initializer element is not constant after 23019a73 removed IOMEM definition from arch/arm/mach-pxa/include/mach/hardware.h Signed-off-by: NMartin Jansa <Martin.Jansa@gmail.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Stephen Warren 提交于
Debugfs files could be accessed any time, so explicitly enable clocks when reading registers to generate debugfs file content. Signed-off-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Zeng Zhaoming 提交于
As manual described, VAG is an internal voltage reference of DAC/ADC, So enabled it before DAC/ADC up. One more thing should care about is VAG fully ramped down requires 400ms, wait it to avoid pop. Signed-off-by: NZeng Zhaoming <zengzm.kernel@gmail.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 31 3月, 2012 1 次提交
-
-
由 Lucas De Marchi 提交于
Usage of /etc/modprobe.conf file was deprecated by module-init-tools and is no longer parsed by new kmod tool. References to this file are replaced in Documentation, comments and Kconfig according to the context. There are also some references to the old /etc/modules.conf from 2.4 kernels that are being removed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi> Acked-by: NTakashi Iwai <tiwai@suse.de> Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 3月, 2012 1 次提交
-
-
由 Eliot Blennerhassett 提交于
Make this function consistent with others in this module by returning 1 for error, instead of -ENOMEM (reverts function signature change from a938fb1e) Signed-off-by: NEliot Blennerhassett <eblennerhassett@audioscience.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 3月, 2012 4 次提交
-
-
由 Randy Dunlap 提交于
Fix module parameter data type to eliminate build warnings. sound/isa/opti9xx/opti92x-ad1848.c:87:1: warning: return from incompatible pointer type sound/isa/opti9xx/opti92x-ad1848.c:87:1: warning: return from incompatible pointer type Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Randy Dunlap 提交于
Fix module parameter data type to eliminate build warning. sound/oss/msnd_pinnacle.c:1727:1: warning: return from incompatible pointer type Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Howells 提交于
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Dan Carpenter 提交于
This function returns zero or -ENOMEM, but because it's type is u16, the -ENOMEM gets changed to 65524. None of the callers care, but lets fix it anyway as a cleanup. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 27 3月, 2012 2 次提交
-
-
由 Huang Shijie 提交于
Move the header to a more common place. The mxs dma engine is not only used in mx23/mx28, but also used in mx50/mx6q. It will also be used in the future chips. Rename it to mxs-dma.h, and create a new folder include/linux/fsl/ to store the Freescale's header files. change mxs-dma driver, mxs-mmc driver, gpmi-nand driver, mxs-saif driver to the new header file. Acked-by: NShawn Guo <shawn.guo@linaro.org> Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NHuang Shijie <b32955@freescale.com> Acked-by: NVinod Koul <vinod.koul@linux.intel.com> Acked-by: NChris Ball <cjb@laptop.org> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
由 Vinod Koul 提交于
commit 4a163c82 added extra parameter to device_prep_dma_cyclic this is not required if we use the wrapper over cyclic API. This is split from Alexedre's patch Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 26 3月, 2012 1 次提交
-
-
由 Rob Herring 提交于
pxa was missed in the moving of IOMEM to a common definition, so lots of IOMEM redefined warnings were introduced. So remove pxa IOMEM definition and fix all the fallout. Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NRob Herring <rob.herring@calxeda.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: rtc-linux@googlegroups.com Cc: alsa-devel@alsa-project.org
-
- 22 3月, 2012 2 次提交
-
-
由 Fabio Estevam 提交于
Since commit 185ecb5f (dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic) prep_dma_cyclic() got an extra context parameter. Add this new parameter in order to fix the following build error (mxs_defconfig and imx_v4_v5_defconfig): sound/soc/soc-dmaengine-pcm.c:149:3: error: too few arguments to function 'chan->device->device_prep_dma_cyclic' Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Takashi Iwai 提交于
The recent Realtek driver tries to assign an extra input via the headphone plug when only a single input source is found. The code worked on Samsung Q1, but it broke ASUS 1015 where the mic is a digital-mic and only a specific ADC works. This patch fixes the assignment of ADC in the shared mic/hp case. Instead of assuming the single ADC at first, reduce the ADCs after trying to assign both mic and HP pins. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42973 Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 3月, 2012 2 次提交
-
-
由 Alexandre Bounine 提交于
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: NVinod Koul <vinod.koul@linux.intel.com>
-
由 Mark Brown 提交于
Based on latest production information. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-
- 20 3月, 2012 3 次提交
-
-
由 Mark Brown 提交于
The optimal management of VMID depends on a number of factors which vary dynamically at runtime, for example the connection to a system docking station. In some circumstances it is desirable to keep VMID enabled all the time, in others it is desirable to aggressively power it up and down. Provide a callback allowing machine driver to configure either the normal power up/down mode (WM8994_VMID_MODE_NORMAL) or to maintain VMID even when idle (WM8994_VMID_MODE_FORCE). This callback, wm8994_vmid_mode(), should be called with the CODEC lock. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
由 Mark Brown 提交于
It can just be enabled all the time with no impact. Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 19 3月, 2012 3 次提交
-
-
由 Hans Verkuil 提交于
Fix HW seek in TEA575x to work properly: - a delay must be present after search start and before first register read or the seek does weird things - when the search stops, the new frequency is not available immediately, we must wait until it appears in the register (fortunately, we can clear the frequency bits when starting the search as it starts at the frequency currently set, not from the value written) - sometimes, seek remains on the current frequency (or moves only a little), so repeat it until it moves by at least 50 kHz Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The tea575x-tuner module has been updated to use the latest V4L2 framework functionality. This also required changes in the drivers that rely on it. The tea575x changes are: - The drivers must provide a v4l2_device struct to the tea module. - The radio_nr module parameter must be part of the actual radio driver, and not of the tea module. - Changed the frequency range to the normal 76-108 MHz range instead of 50-150. - Add hardware frequency seek support. - Fix broken rxsubchans/audmode handling. - The application can now select between stereo and mono. - Support polling for control events. - Add V4L2 priority handling. And radio-sf16fmr2.c now uses the isa bus kernel framework. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Thanks-to: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Daniel Mack 提交于
PXA's SSP engine fails to take its current channel phase into account when enabling a stream while the engine is already running. This results in randomly swapped left/right channels on either the record or the playback side, depending on which one was enabled first. The following patch fixes this by factoring out the bit field modifications in question to a separate function that pauses the engine temporarily, modifies the bits and kicks it off again afterwards. Appearantly, a transition of SSCR0_SSE syncs both directions properly. The patch has been rolled out to quite a number of devices over the last weeks and seems to fix the issue reliably. Signed-off-by: NDaniel Mack <zonque@gmail.com> Reported-and-tested-by: NSven Neumann <s.neumann@raumfeld.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
-