Compatible with ALC269.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are compatible with ALC882 codec.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AMD Hudson controllers give noisy outputs when the buffer data is
rewritten on the fly as PulseAudio does.  This seems fixed by the
snoop bit enabled just like ATI chipset.

Also, disable 64bit DMA as now, to be sure.
We can revisit this later.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similar process like in patch_realtek.c and patch_sigmatel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a docking-station has a line-in jack, we can handle it also as
a detectable jack just like mic-in.  This will improve the usability
of HP laptops with a docking-station.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In addition to the normal mic jack, the mic (or line-in) jack on the
docking-station is checked also as a candidate for auto-selection.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also replace more open-codes with this function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In addition to the normal external mic jack, check also the mic jack
on a docking-station as well, and select the input source appropriately.

The similar functionality was already implemented in patch_sigmatel.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

spec->automute_lines shouldn't be set unless the line-detection is
available.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replace the open-code with get_wcaps_type() macro.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Replaced the open-code with the new helper function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Implement the same functionality as Realtek's auto-mute mode control.
Now Conexant auto-parser can also mutes line-out and provide the enum
control for different automute behavior.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use a struct instead of each array for managing input-source info
for auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are no signs of a dmic at node 0x0b, so the user is left with
an additional internal mic which does not exist. This commit removes
that non-existing mic.

Cc: stable@kernel.org (2.6.32+)
BugLink: http://bugs.launchpad.net/bugs/731706Reported-by: NJames Page <james.page@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Still experimental.
Not enabled as default unless model=auto is passed.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Check the routing more exactly for avoiding the duplicated controls for
the very same effect for multiple capture routes in Conexant auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the intermediate selector widget in the capture path provides the
boost volume, create the corresponding volume control.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just for safety reason (for avoiding any possible regressions), don't
enable auto-parser as default for cxt5045 and 5051, as well as 5047.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It can (must for some) be used for all Conexnat codecs safely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of giving fixed arrays, look for ADC nids dynamically in the
tree in Conexant auto-parser code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Similarly like other Conexant codecs, now model=auto is supported for
cxt5047.

But the auto-parser mode isn't activated as default yet, since BIOS
pin-configs seem often broken on machines with this codec.  User need
to pass model=auto explicitly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Handle not only a single-depth input-route but two-level depth routes
(PIN->MUX->ADC), too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Keep the registered input-pins in imux_pins[], and fix the inconsistent
use of sepc->auto_mic_ext.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Extend the existing auto-parser for CX2064x for cxt5051 codec.
Now the auto-parser supports ADC-switching for this codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some codecs have no mute caps in audio I/O widgets.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of keeping always EAPD on, turn on/off appropriately at jack
plugging in Conexant auto-parser mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The wrong id is assigned for external/internal mics in the auto-mic
selection parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AMD chipsets often behave pretty badly regarding the DMA position
reporting.  It results in the bad quality audio recording.
Using position_fix=3 works well in general for them, so let's enable
it as default for AMD.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix NULL-dereference when try to use alt_playback since those codecs
which support multistreaming playback usually have more than 1 adc but
the driver should create alt_capture when spec->stream_analog_alt_capture
is also defined.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The check of chained fixup list entry was done against the wrong element.
A stupid mistake during refactoring.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>