We often end up missing fences on older asics with
writeback enabled which leads to delays in the userspace
accel code, so just disable it by default on those asics.
Reported-by: NHelge Deller <deller@gmx.de>
Reported-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This allow to share the ib pool with semaphore and avoid
having more bo around.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This avoid to waste ib pool size and avoid a bunch of wait for
previous ib to finish.
Signed-off-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

In cases where the scanout hw is sufficiently similar between "overlay"
and traditional crtc layers, it might be convenient to allow the driver
to create internal drm_plane helper objects used by the drm_crtc
implementation, rather than duplicate code between the plane and crtc.
A private plane is not exposed to userspace.
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Since plane->fb and plane->crtc are set in drm_mode_setplane()
after update_plane(), They should be cleared after disable().
Signed-off-by: NRob Clark <rob@ti.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If it failed, leave it in the "off" state.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

If a PCH pipe PLL is being used by transcoder C, don't disable it.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

In the pre-gem days with non-existing hangcheck and gpu reset code,
this timeout of 3 seconds was pretty important to avoid stuck
processes.

But now we have the hangcheck code in gem that goes to great length
to ensure that the gpu is really dead before declaring it wedged.

So there's no need for this timeout anymore. Actually it's even harmful
because we can bail out too early (e.g. with xscreensaver slip)
when running giant batchbuffers. And our code isn't robust enough
to properly unroll any state-changes, we pretty much rely on the gpu
reset code cleaning up the mess (like cache tracking, fencing state,
active list/request tracking, ...).

With this change intel_begin_ring can only fail when the gpu is
wedged, and it will return -EAGAIN (like wait_request in case the
gpu reset is still outstanding).

v2: Chris Wilson noted that on resume timers aren't running and hence
we won't ever get kicked out of this loop by the hangcheck code. Use
an insanely large timeout instead for the HAS_GEM case to prevent
resume bugs from totally hanging the machine.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

If our semaphore logic gets confused and we have a ring stuck waiting
for one, there's a decent chance it'll just execute garbage when being
kicked. Also, kicking the ring obscures the place where the error
first occured, making error_state decoding much harder.

So drop this an let gpu reset handle this mess in a clean fashion.

In contrast, kicking rings stuck on MI_WAIT is rather harmless, at
worst there'll be a bit of screen-flickering. There's also old
broken userspace out there which needs this as a  work-around.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@hchris-wilson.co.uk>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

These registers are automatically incremented by the hardware during
transform feedback to track where the next streamed vertex output
should go.  Unlike the previous generation, which had a packet for
setting the corresponding registers to a defined value, gen7 only has
MI_LOAD_REGISTER_IMM to do so.  That's a secure packet (since it loads
an arbitrary register), so we need to do it from the kernel, and it
needs to be settable atomically with the batchbuffer execution so that
two clients doing transform feedback don't stomp on each others'
state.

Instead of building a more complicated interface involcing setting the
registers to a specific value, just set them to 0 when asked and
userland can tweak its pointers accordingly.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The waits we do here are generally so short that sleeping is a bad
idea unless we have an IRQ to wake us up.  Improves regression test
performance from 18 minutes to 3.5 minutes on gen7, which is now
consistent with the previous generation.
Signed-off-by: NEric Anholt <eric@anholt.net>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Previous to this commit, testing easily reproduced a failure where the
seqno would apparently arrive after the IRQ associated with it, with test programs as simple as:

for (;;) {
    glCopyPixels(0, 0, 1, 1);
    glFinish();
}

Various workarounds we've seen for previous generations didn't work to
fix this issue, so until new information comes in, replace the IRQ
waits on the BLT ring with polling.
Signed-off-by: NEric Anholt <eric@anholt.net>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

As a workaround for IRQ synchronization issues in the gen7 BLT ring,
we want to turn the two wait functions into polling loops.
Signed-off-by: NEric Anholt <eric@anholt.net>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Acked-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

They don't fix our problems alone, but we're told to set them.
Signed-off-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Add new ioctls for getting and setting the current destination color
key.  This allows for simple overlay display control by matching a color
key value in the primary plane before blending the overlay on top.

v2: remove unnecessary mutex acquire/release around reg accesses
v3: add support for full color key management
v4: fix copy & paste bug in snb_get_colorkey
    don't bother checking min/max values against docs as the docs are likely
    wrong (how could we handle 10bpc surface formats?)
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>

To save power when the sprite is full screen, we can disable the primary
plane on the same pipe.  Track the sprite status and enable/disable the
primary opportunistically.

v2: remove primary plane enable/disable hooks; they're identical
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The video sprites support various video surface formats natively and can
handle scaling as well.  So add support for them using the new DRM core
sprite support functions.

v2: use drm specific fourcc header and defines
v3: address Daniel's comments:
  - don't take struct mutex around register access (only needed for
    regs in the GT power well)
  - don't hold struct mutex across vblank waits
  - fix up update_plane API (pass obj instead of GTT offset)
  - add interlaced defines for sprite regs
  - drop unnecessary 'reg' variables
  - comment double buffered reg flushing
  Also fix w/h confusion when writing the scaling reg.
v4: more fixes, address more comments from Daniel, and include Hai's fix
  - prevent divide by zero in scaling calculation (Hai Lan)
  - update to Ville's new DRM_FORMAT_* types
  - fix sprite watermark handling (calc based on CRTC size, separate
    from normal display wm)
  - remove private refcounts now that the fb cleanups handles things
v5: add linear surface support
v6: remove color key clearing & setting from update_plane

For this version, I tested DPMS since it came up in the last review;
DPMS off/on works ok when a video player is working under X, but for
power saving we'll probably want to do something smarter.  I'll leave
that for a separate patch on top.  Likewise with the refcounting/fb
layer handling, which are really separate cleanups.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

We learned that the ECOBUS register was inside the GT power well, and
so *did* need force wake to be read, so it gets removed from the list
of 'doesn't need force wake' registers.

That means the code reading ECOBUS after forcing the mt_force_wake
function to be called needs to use I915_READ_NOTRACE; it doesn't need
to do more force wake fun as it's already done it manually.

This also adds a comment explaining why the MT forcewake testing code
only needs to call mt_forcewake_get/put and not disable RC6 manually
-- the ECOBUS read will return 0 if the device is in RC6 and isn't
using MT forcewake, causing the test to work correctly.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Many of the old fields from Ironlake have gone away. Strip all those
fields, and try to update to fields people care about. RC information
isn't exactly ideal anymore. All we can guarantee when we read the
register is that we're not using forcewake, ie. the software isn't
forcing the hardware to stay awake. The downside is that in doing this
we may wait a while and that causes an unnaturally idle state on the
GPU.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42578Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

This matches the modern specs more accurately.

This will be used by the following patch to fix the way we display RC
status.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

The docs say this is required for Gen7, and since the bit was added for
Gen6, we are also setting it there pit pf paranoia. Particularly as
Chris points out, if PIPE_CONTROL counts as a 3d state packet.

This was found through doc inspection by Ken and applies to Gen6+;
Reported-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

dev_priv keeps track of the current addressing mode that gets set at
execbuffer time. Unfortunately the existing code was doing this before
acquiring struct_mutex which leaves a race with another thread also
doing an execbuffer. If that wasn't bad enough, relocate_slow drops
struct_mutex which opens a much more likely error where another thread
comes in and modifies the state while relocate_slow is being slow.

The solution here is to just defer setting this state until we
absolutely need it, and we know we'll have struct_mutex for the
remainder of our code path.

v2: Keith noticed a bug in the original patch.
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

This merges the evergreen HDMI audio support.

* 'drm-radeon-testing' of ../drm-radeon-next:
  drm/radeon/kms: define TMDS/LVTM HDMI enabling bits
  drm/radeon/kms: workaround invalid AVI infoframe checksum issue
  drm/radeon/kms: setup HDMI mode on Evergreen encoders
  drm/radeon/kms: support for audio on Evergreen
  drm/radeon/kms: minor HDMI audio cleanups
  drm/radeon/kms: do not force DVI mode on DCE4 if audio is on
ridge

Conflicts:
	drivers/gpu/drm/radeon/evergreen.c

The names has been taken from free M76 specs.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This change was verified to fix both issues with no video I've
investigated. I've also checked checksum calculation with fglrx on:
RV620, HD54xx, HD5450, HD6310, HD6320.

Cc: stable@vger.kernel.org
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'drm-intel-next' of git://people.freedesktop.org/~keithp/linux:
  drm/i915: check ACTHD of all rings
  drm/i915: DisplayPort hot remove notification to audio driver
  drm/i915: HDMI hot remove notification to audio driver
  drm/i915: dont trigger hotplug events on unchanged ELD
  drm/i915: rename audio ELD registers
  drm/i915: fix ELD writing for SandyBridge

This doesn't work and isn't of any use. It was inherited from the older
driver code and can go away. Kill it off before it becomes part of mainstream
as we don't want to support it in future.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

And update to the actual product naming as the press release is now out.

http://newsroom.intel.com/docs/DOC-2553#pressmaterials

- Fixes the wrong ifdef check
- Fixes the missing crtc count declaration
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Oaktrail Atom E620 has a different PCI identifier we need to cover
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge branch 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung into drm-core-next

these patch sets include the following features:
- add Samsung SoC Exynos based HDMI support.
- add pm feature for fimd driver.
- add multi buffer plane pixel formats to drm/drm_fourcc.h.
  multi buffer plane pixel format has seperated memory spaces for each
  plane. for exampme, NV12M has Y plane and CbCr plane and these are in
  non-continuous memory region. compared with NV12, NV12M's memory shape
  is like following.
  NV12  : ______(Y)(CbCr)_______
  NV12M : __(Y)_ ..... _(CbCr)__
- bug fix to vblank.
- code clean to exynos gem framework.

* 'exynos-drm-next' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm/exynos: added hdmi display support
  drm/exynos: added mutex lock and code clean.
  drm/exynos: extend vblank off delay time.
  drm/exynos: change driver name.
  drm/exynos: Support multi buffers
  drm: Add multi buffer plane pixel formats
  drm/exynos: added pm support.
  drm/exynos: remove buffer creation of fbdev from drm framebuffer creation
  drm/exynos: Split creation of gem object and gem handle
  drm/exynos: Fix a fake mmap offset creation
  drm/exynos: gem code cleanup

This patch is hdmi display support for exynos drm driver.

There is already v4l2 based exynos hdmi driver in drivers/media/video/s5p-tv
and some low level code is already in s5p-tv and even headers for register
define are almost same. but in this patch, we decide not to consider separated
common code with s5p-tv.

Exynos HDMI is composed of 5 blocks, mixer, vp, hdmi, hdmiphy and ddc.

1. mixer. The piece of hardware responsible for mixing and blending multiple
data inputs before passing it to an output device.  The mixer is capable of
handling up to three image layers. One is the output of VP.  Other two are
images in RGB format.  The blending factor, and layers' priority are controlled
by mixer's registers. The output is passed to HDMI.

2. vp (video processor). It is used for processing of NV12/NV21 data.  An image
stored in RAM is accessed by DMA. The output in YCbCr444 format is send to
mixer.

3. hdmi. The piece of HW responsible for generation of HDMI packets. It takes
pixel data from mixer and transforms it into data frames. The output is send
to HDMIPHY interface.

4. hdmiphy. Physical interface for HDMI. Its duties are sending HDMI packets to
HDMI connector. Basically, it contains a PLL that produces source clock for
mixer, vp and hdmi.

5. ddc (display data channel). It is dedicated i2c channel to exchange display
information as edid with display monitor.

With plane support, exynos hdmi driver fully supports two mixer layes and vp
layer. Also vp layer supports multi buffer plane pixel formats having non
contigus memory spaces.

In exynos drm driver, common drm_hdmi driver to interface with drm framework
has opertion pointers for mixer and hdmi. this drm_hdmi driver is registered as
sub driver of exynos_drm. hdmi has hdmiphy and ddc i2c clients and controls
them. mixer controls all overlay layers in both mixer and vp.

Vblank interrupts for hdmi are handled by mixer internally because drm
framework cannot support multiple irq id. And pipe number is used to check
which display device irq happens.

History
v2: this version
 - drm plane feature support to handle overlay layers.
 - multi buffer plane pixel format support for vp layer.
 - vp layer support

RFCv1: original
 - at https://lkml.org/lkml/2011/11/4/164Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Signed-off-by: NInki Dae <inki.dae@samsung.com>

some platform could be entering to sleep after short time once lcd panel off
but before that vblank could be off by vblank off delay feature. at that time,
vblank doesn't have the pair between vblank_get/put. so this path makes vblank
off delay to have enough.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

These formats(NV12M, NV12MT and YUV420M) have non contiguous  multi
planes, so each plane uses different buffer. The exynos drm should
support multi buffer for them.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

Multi buffer plane pixel format has seperated memory spaces for each
plane. For example, NV12M has Y plane and CbCr plane and these are in
non contiguous memory region. Compared with NV12, NV12M's memory shape
is like following.
NV12  : ______(Y)(CbCr)_______
NV12M : __(Y)_ ..... _(CbCr)__
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

this patch adds pm feature for fimd driver.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>

The fbdev fb and the user fb is created from same function -
exynos_drm_fb_create, but this function creates not only drm framebuffer
but buffer of fbdev. Remove it because it complicates codes and use
exynos_drm_gem_create() than exynos_drm_buf_create() to create buffer of
fbdev, it give better consistency of codes and more clear
implementation.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>