add two tracepoints for open completion. One for error one for completion (open_done).
Sample output below

            TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
               | |       |   ||||       |         |
            bash-15348 [007] .... 42441.027492: smb3_enter: 	cifs_lookup: xid=45
            bash-15348 [007] .... 42441.028214: smb3_cmd_err: 	sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=105 status=0xc0000034 rc=-2
            bash-15348 [007] .... 42441.028219: smb3_open_err: xid=45 sid=0x6173e4ce tid=0xa05150e6 cr_opts=0x0 des_access=0x80 rc=-2
            bash-15348 [007] .... 42441.028225: smb3_exit_done: 	cifs_lookup: xid=45
          fop777-24560 [002] .... 42442.627617: smb3_enter: 	cifs_revalidate_dentry_attr: xid=46
          fop777-24560 [003] .... 42442.628301: smb3_cmd_err: 	sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=106 status=0xc0000034 rc=-2
          fop777-24560 [003] .... 42442.628319: smb3_open_err: xid=46 sid=0x6173e4ce tid=0xa05150e6 cr_opts=0x0 des_access=0x80 rc=-2
          fop777-24560 [003] .... 42442.628335: smb3_enter: 	cifs_atomic_open: xid=47
          fop777-24560 [003] .... 42442.629587: smb3_cmd_done: 	sid=0x6173e4ce tid=0xa05150e6 cmd=5 mid=107
          fop777-24560 [003] .... 42442.629592: smb3_open_done: xid=47 sid=0x6173e4ce tid=0xa05150e6 fid=0xb8a0984d cr_opts=0x40 des_access=0x40000080
Signed-off-by: NSteve French <smfrench@gmail.com>

For smb1 nocase can be specified on mount.  Allow displaying it
in debug data.
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

If "posix" (or synonym "unix" for backward compatibility) specified on mount,
and server advertises support for SMB3.11 POSIX negotiate context, then
enable the new posix extensions on the tcon.  This can be viewed by
looking for "posix" in the mount options displayed by /proc/mounts
for that mount (ie if posix extensions allowed by server and the
experimental POSIX extensions also requested on the mount by specifying
"posix" at mount time).

Also add check to warn user if conflicting unix/nounix or posix/noposix specified
on mount.
Signed-off-by: NSteve French <smfrench@gmail.com>

Unlike CIFS where UNIX/POSIX extensions had been negotiatable,
SMB3 did not have POSIX extensions yet.  Add the new SMB3.11
POSIX negotiate context to ask the server whether it can
support POSIX (and thus whether we can send the new POSIX open
context).
Signed-off-by: NSteve French <smfrench@gmail.com>

To improve security it may be helpful to have additional ways to restrict the
ability to override the default dialects (SMB2.1, SMB3 and SMB3.02) on mount
with old dialects (CIFS/SMB1 and SMB2) since vers=1.0 (CIFS/SMB1) and vers=2.0
are weaker and less secure.

Add a module parameter "disable_legacy_dialects"
(/sys/module/cifs/parameters/disable_legacy_dialects) which can be set to
1 (or equivalently Y) to forbid use of vers=1.0 or vers=2.0 on mount.

Also cleans up a few build warnings about globals for various module parms.
Signed-off-by: NSteve French <smfrench@gmail.com>

Note which ones of the module params are cifs dialect only
(N/A for default dialect now that has moved to SMB2.1 or later)
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>

RHBZ: 1539612

Lets show the "w" bit for those files have a .write interface to set/enable/...
the feature.
Reported-by: NXiaoli Feng <xifeng@redhat.com>
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

We really don't want to be encouraging people to use the old
(less secure) cifs dialect (SMB1) and it can be confusing for them
with SMB3 (or later) being recommended but the module name is cifs.

Add a module alias for "smb3" to cifs.ko to make this less confusing.
Signed-off-by: NSteve French <smfrench@gmail.com>

RHBZ: 1539617

Check that, if it is not a boolean, the value the user tries
to write to /proc/fs/cifs/cifsFYI is valid and return an error
if not.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reported-by: NXiaoli Feng <xifeng@redhat.com>

RHBZ: 1566345

When truncating a file we always do this synchronously to the server.
Thus we need to make sure that the cached inode metadata is
marked as stale so that on next getattr we will refresh the metadata.
In this particular bug we want to ensure that both ctime and mtime
are updated and become visible to the application after a truncate.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reported-by: NXiaoli Feng <xifeng@redhat.com>

When loooking at the logs for the new trace-cmd tracepoints for cifs,
it would help to know which tid is for which share (UNC name) so
update /proc/fs/cifs/DebugData to display the tid.
Also display Maximal Access which was missing as well.

Now the entry for typical entry for a tcon (in proc/fs/cifs/) looks
like:

1) \\localhost\test Mounts: 1 DevInfo: 0x20 Attributes: 0x1006f
	PathComponentMax: 255 Status: 1 type: DISK
	Share Capabilities: None Aligned, Partition Aligned,	Share Flags: 0x0
	tid: 0xe0632a55	Optimal sector size: 0x200	Maximal Access: 0x1f01ff
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NSteve French <smfrench@gmail.com>

Fix a few cases where we were not freeing the xid which led to
active requests being non-zero at unmount time.
Signed-off-by: NSteve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>

When direct I/O is used, the data buffer may not always align to page
boundaries. Introduce a page offset in transport data structures to
describe the location of the buffer within the page.

Also change the function to pass the page offset when sending data to
transport.
Signed-off-by: NLong Li <longli@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>

Although dmesg logs and wireshark network traces can be
helpful, being able to dynamically enable/disable tracepoints
(in this case via the kernel ftrace mechanism) can also be
helpful in more quickly debugging problems, and more
selectively tracing the events related to the bug report.

This patch adds 12 ftrace tracepoints to cifs.ko for SMB3 events
in some obvious locations.  Subsequent patches will add more
as needed.

Example use:
   trace-cmd record -e cifs
   <run test case>
   trace-cmd show

Various trace events can be filtered. See:
       trace-cmd list | grep cifs
for the current list of cifs tracepoints.

Sample output (from mount and writing to a file):

root@smf:/sys/kernel/debug/tracing/events/cifs# trace-cmd show
<snip>
      mount.cifs-6633  [006] ....  7246.936461: smb3_cmd_done: pid=6633 tid=0x0 sid=0x0 cmd=0 mid=0
      mount.cifs-6633  [006] ....  7246.936701: smb3_cmd_err:  pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=1 status=0xc0000016 rc=-5
      mount.cifs-6633  [006] ....  7246.943055: smb3_cmd_done: pid=6633 tid=0x0 sid=0x3d9cf8e5 cmd=1 mid=2
      mount.cifs-6633  [006] ....  7246.943298: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=3 mid=3
      mount.cifs-6633  [006] ....  7246.943446: smb3_cmd_done: pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=4
      mount.cifs-6633  [006] ....  7246.943659: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=3 mid=5
      mount.cifs-6633  [006] ....  7246.943766: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=11 mid=6
      mount.cifs-6633  [006] ....  7246.943937: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=7
      mount.cifs-6633  [006] ....  7246.944020: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=8
      mount.cifs-6633  [006] ....  7246.944091: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=9
      mount.cifs-6633  [006] ....  7246.944163: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=10
      mount.cifs-6633  [006] ....  7246.944218: smb3_cmd_err:  pid=6633 tid=0xf9447636 sid=0x3d9cf8e5 cmd=11 mid=11 status=0xc0000225 rc=-2
      mount.cifs-6633  [006] ....  7246.944219: smb3_fsctl_err: xid=0 fid=0xffffffffffffffff tid=0xf9447636 sid=0x3d9cf8e5 class=0 type=393620 rc=-2
      mount.cifs-6633  [007] ....  7246.944353: smb3_cmd_done: pid=6633 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=12
            bash-2071  [000] ....  7256.903844: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=13
            bash-2071  [000] ....  7256.904172: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=16 mid=14
            bash-2071  [000] ....  7256.904471: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=15
            bash-2071  [000] ....  7256.904950: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=5 mid=16
            bash-2071  [000] ....  7256.905305: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=17 mid=17
            bash-2071  [000] ....  7256.905688: smb3_cmd_done: pid=2071 tid=0xe1b781a sid=0x3d9cf8e5 cmd=6 mid=18
            bash-2071  [000] ....  7256.905809: smb3_write_done: xid=0 fid=0xd628f511 tid=0xe1b781a sid=0x3d9cf8e5 offset=0x0 len=0x1b
Signed-off-by: NSteve French <stfrench@microsoft.com>
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>

Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NSteve French <smfrench@gmail.com>

And make SMB2_close just a wrapper for SMB2_close_flags.
We need this as we will start to send SMB2_CLOSE pdus using special
flags.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

In SMB2_open(), if we got a lease we need to store this in the fid structure
or else we will never be able to map a lease break back to which file/fid
it applies to.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Previous patches "cifs: update calc_size to take a server argument"
and
  "cifs: add server argument to the dump_detail method"
were broken if CONFIG_CIFS_DEBUG2 enabled
Signed-off-by: NSteve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>

and change the smb2 version to take heder_preamble_size into account
instead of hardcoding it as 4 bytes.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

We need a struct TCP_Server_Info *server to this method as it calls
calc_size. The calc_size method will soon be changed to also
take a server argument.
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

In SMB2/SMB3 unlike in cifs we unnecessarily open the root of the share
over and over again in various places during mount and path revalidation
and also in statfs.  This patch cuts redundant traffic (opens and closes)
by simply keeping the directory handle for the root around (and reopening
it as needed on reconnect), so query calls don't require three round
trips to copmlete - just one, and eases load on network, client and
server (on mount alone, cuts network traffic by more than a third).

Also add a new cifs mount parm "nohandlecache" to allow users whose
servers might have resource constraints (eg in case they have a server
with so many users connecting to it that this extra handle per mount
could possibly be a resource concern).
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>

As with NFS, which ignores sync on directory handles,
fsync on a directory handle is a noop for CIFS/SMB3.
Do not return an error on it.  It breaks some database
apps otherwise.
Signed-off-by: NSteve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>

As per listxattr(2):

       On success, a nonnegative number is returned indicating the size
       of the extended attribute name list.  On failure, -1 is returned
       and errno  is set appropriately.

In SMB1, when the server returns an empty EA list through a listxattr(),
it will correctly return 0 as there are no EAs for the given file.

However, in SMB2+, it returns -ENODATA in listxattr() which is wrong since
the request and response were sent successfully, although there's no actual
EA for the given file.

This patch fixes listxattr() for SMB2+ by returning 0 in cifs_listxattr()
when the server returns an empty list of EAs.
Signed-off-by: NPaulo Alcantara <palcantara@suse.de>
Reviewed-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Now signing is supported with RDMA transport.

Remove the code that disabled it.
Signed-off-by: NLong Li <longli@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>

The data buffer allocated on the stack can't be DMA'ed, ib_dma_map_page will
return an invalid DMA address for a buffer on stack. Even worse, this
incorrect address can't be detected by ib_dma_mapping_error. Sending data
from this address to hardware will not fail, but the remote peer will get
junk data.

Fix this by allocating the request on the heap in smb3_validate_negotiate.

Changes in v2:
Removed duplicated code on freeing buffers on function exit.
(Thanks to Parav Pandit <parav@mellanox.com>)
Fixed typo in the patch title.

Changes in v3:
Added "Fixes" to the patch.
Changed several sizeof() to use *pointer in place of struct.

Changes in v4:
Added detailed comments on the failure through RDMA.
Allocate request buffer using GPF_NOFS.
Fixed possible memory leak.

Changes in v5:
Removed variable ret for checking return value.
Changed to use pneg_inbuf->Dialects[0] to calculate unused space in pneg_inbuf.

Fixes: ff1c038a ("Check SMB3 dialects against downgrade attacks")
Signed-off-by: NLong Li <longli@microsoft.com>
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: NTom Talpey <ttalpey@microsoft.com>

INFINIBAND_ADDR_TRANS depends on INFINIBAND.  So there's no need for
options which depend INFINIBAND_ADDR_TRANS to also depend on INFINIBAND.
Remove the unnecessary INFINIBAND depends.
Signed-off-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

CIFS_SMB_DIRECT code depends on INFINIBAND_ADDR_TRANS provided symbols.
So declare the kconfig dependency.  This is necessary to allow for
enabling INFINIBAND without INFINIBAND_ADDR_TRANS.
Signed-off-by: NGreg Thelen <gthelen@google.com>
Cc: Tarick Bedeir <tarick@google.com>
Reviewed-by: NLong Li <longli@microsoft.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

It's not necessary to allocate another iov when going through the buffers
in smbd_send() through RDMA send.

Remove it to reduce stack size.

Thanks to Matt for spotting a printk typo in the earlier version of this.

CC: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: NLong Li <longli@microsoft.com>
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSteve French <smfrench@gmail.com>

SMB server will not sign data transferred through RDMA read/write. When
signing is used, it's a good idea to have all the data signed.

In this case, use RDMA send/recv for all data transfers. This will degrade
performance as this is not generally configured in RDMA environemnt. So
warn the user on signing and RDMA send/recv.
Signed-off-by: NLong Li <longli@microsoft.com>
Acked-by: NRonnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSteve French <smfrench@gmail.com>

The preauth hash was not being recalculated properly on reconnect
of SMB3.11 dialect mounts (which caused access denied repeatedly
on auto-reconnect).

Fixes: 8bd68c6e ("CIFS: implement v3.11 preauth integrity")
Signed-off-by: NSteve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>

Temporarily disable AES-GCM, as AES-CCM is only currently
enabled mechanism on client side.  This fixes SMB3.11
encrypted mounts to Windows.

Also the tree connect request itself should be encrypted if
requested encryption ("seal" on mount), in addition we should be
enabling encryption in 3.11 based on whether we got any valid
encryption ciphers back in negprot (the corresponding session flag is
not set as it is in 3.0 and 3.02)
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>

Dan Carpenter had pointed this out a while ago, but the code around
this had changed so wasn't causing any problems since that field
was not used in this error path.

Still, it is cleaner to always initialize this field, so changing
the error path to set it.
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>
CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

Signed-off-by: NAurelien Aptel <aaptel@suse.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
Reported-by: NLong Li <longli@microsoft.com>

RHBZ: 1453123

Since at least the 3.10 kernel and likely a lot earlier we have
not been able to create unix domain sockets in a cifs share
when mounted using the SFU mount option (except when mounted
with the cifs unix extensions to Samba e.g.)
Trying to create a socket, for example using the af_unix command from
xfstests will cause :
BUG: unable to handle kernel NULL pointer dereference at 00000000
00000040

Since no one uses or depends on being able to create unix domains sockets
on a cifs share the easiest fix to stop this vulnerability is to simply
not allow creation of any other special files than char or block devices
when sfu is used.

Added update to Ronnie's patch to handle a tcon link leak, and
to address a buf leak noticed by Gustavo and Colin.
Acked-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
CC:  Colin Ian King <colin.king@canonical.com>
Reviewed-by: NPavel Shilovsky <pshilov@microsoft.com>
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NRonnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>
Cc: stable@vger.kernel.org

When sending through SMB Direct, also dump the packet in SMB send path.

Also fixed a typo in debug message.
Signed-off-by: NLong Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>

When sending the last iov that breaks into smaller buffers to fit the
transfer size, it's necessary to check if this is the last iov.

If this is the latest iov, stop and proceed to send pages.
Signed-off-by: NLong Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: NSteve French <stfrench@microsoft.com>
Reviewed-by: NRonnie Sahlberg <lsahlber@redhat.com>