- 19 12月, 2012 8 次提交
-
-
由 Max Filippov 提交于
trap_set_handler sets new C-handler in the exception table and returns previous handler. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
In order to use S32C1I instruction on cores with ATOMCTL SR the register must be properly initialized. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Although scompare1 may be saved/restored by xchal_ncp_{load,store} macros, explicit save/restore of registers manipulated by the kernel itself is considered more correct. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Chris Zankel 提交于
Use ENDPROC() to mark the end of assembler functions. Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Manually load references to exc_table from the explicit literal in order to fit DoubleExceptionVector.literals into the available 16-byte gap before DoubleExceptionVector.text in the absence of link time relaxation. Without this fix DoubleExceptionVector.literal section overlaps DoubleExceptionVector.text section in the linked vmlinux image. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Wanlong Gao 提交于
Fix the definition of the function ccount_read to be compatible to the member read of the structure clocksource. Signed-off-by: NWanlong Gao <wanlong.gao@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 29 11月, 2012 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 10月, 2012 5 次提交
-
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Chris Zankel 提交于
When we copy a user thread with CLONE_VM, we also have to reset windowbase and windowstart to start a pristine stack frame. Otherwise, overflows can happen using the address 0 as the stack pointer. Also add a special case for vfork, which continues on the parent stack until it calls execve. Because this could be a call8, we need to spill the stack pointer of the previus frame (if still 'live' in the register file). Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Chris Zankel 提交于
Xtensa implements a method that allows to generate a arbitrary output for each system call by defining the __SYSCALL(number, function, num_args). This usually requires to include uapi/unistd.h twice. Instead of removing the guard agains multiple inclusion entirely, allow to include unistd.h again only if __SYSCALL is defined. Note that __SYSCALL gets always undefined at the end of the file. Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 20 10月, 2012 1 次提交
-
-
由 Chris Zankel 提交于
Fix two compiler warnings complaining about truncating a value on a 64-bit host, and about declaring an unused variable that is only used for a specific configuration. Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 16 10月, 2012 5 次提交
-
-
由 David Howells 提交于
UAPI: (Scripted) Disintegrate arch/xtensa/include/asm Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: NDave Jones <davej@redhat.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
- correct use of .config #define name; CONFIG_UNALIGNED_USER ---> CONFIG_XTENSA_UNALIGNED_USER Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NPete Delaney <piet@tensilica.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
- reference SRs by names where possible, not by numbers; - get rid of __stringify around SR names where possible; - remove unneeded SR names from asm/regs.h; - add SREG_ prefix to remaining SR names; Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Boot parameter tags with handlers are ignored like this: [ 0.000000] Ignoring tag 0x00001003 [ 0.000000] Ignoring tag 0x00001001 [ 0.000000] Ignoring tag 0x00001004 because neither tagtable entries nor tag handlers appear in the vmlinux. Fix tagtable definition attributes so that tag entries are not dropped. Fix end of memory bank calculation in parse_tag_mem: it is intended to round down to page size, but instead did something strange leading to hang right after boot. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Marc Gauthier 提交于
When doing a fork (new VM), the new task has a mirror image of the parent's stack, so keeps the same live register windows etc. However when doing a clone with CLONE_VM, keeping the same VM (eg. when creating a new thread), the child starts afresh on a new stack -- it cannot share any part of the parent stack. It especially cannot have the same live AR windows as the parent, otherwise it will overwrite the parent stack on overflow, likely causing corruption. (and so it did...) Effectively, the register windows need to be spilled. Turns out it's much easier to simply not copy parent register windows when CLONE_VM is set. Signed-off-by: NMarc Gauthier <marc@tensilica.com> Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 13 10月, 2012 1 次提交
-
-
由 Jeff Layton 提交于
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 10月, 2012 8 次提交
-
-
由 Max Filippov 提交于
Remove Kconfig entries, boot subdirectory, dependencies from other boot-* Makefiles, and sections from ld scripts. Remove stale redboot code that used to pass initrd addresses in a3 and a4 to _start. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
__xtensa_libgcc_window_spill is needed for __builtin_return_address(1), but its libgcc implementation cannot be used as it makes a syscall. Atomic intrinsics are used by single staging driver. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Existing simulators show this level of performance. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
xtensa_irq_disable/xtensa_irq_enable used to call xtensa_irq_unmask with wrong argument. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Fix caching attributes setup providing correct _PAGE_CA_* names. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
由 Max Filippov 提交于
Now that binutils generate *.unlikely sections which don't follow documented (info as) literal section naming rules, section name transformation script doesn't work well resulting in the following errors at vmlinux link time: main.c:(.text.unlikely+0x3): dangerous relocation: l32r: literal placed after use: .literal.unlikely Fix section name transformation script by adding specific rule for .text.unlikely sections. Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NChris Zankel <chris@zankel.net>
-
- 01 10月, 2012 2 次提交
-
-
由 Richard Weinberger 提交于
This include is no longer needed. (seems to be a leftover from try_to_freeze()) Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
asm glue checks that Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 23 9月, 2012 1 次提交
-
-
由 Frederic Weisbecker 提交于
In the old times, the whole idle task was considered as an RCU quiescent state. But as RCU became more and more successful overtime, some RCU read side critical section have been added even in the code of some architectures idle tasks, for tracing for example. So nowadays, rcu_idle_enter() and rcu_idle_exit() must be called by the architecture to tell RCU about the part in the idle loop that doesn't make use of rcu read side critical sections, typically the part that puts the CPU in low power mode. This is necessary for RCU to find the quiescent states in idle in order to complete grace periods. Add this missing pair of calls in the xtensa's idle loop. Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Cc: Chris Zankel <chris@zankel.net> Cc: <stable@vger.kernel.org> # 3.3+ Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
-
- 19 9月, 2012 2 次提交
-
-
由 Thierry Reding 提交于
Most architectures implement this in exactly the same way. Instead of having each architecture duplicate this function, provide a single implementation in the core and make it a weak symbol so that it can be overridden on architectures where it is required. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Thierry Reding 提交于
Remove the __init annotations in order to keep pci_fixup_irqs() around after init (e.g. for hotplug). This requires the same change for the implementation of pcibios_update_irq() on all architectures. While at it, all __devinit annotations are removed as well, since they will be useless now that HOTPLUG is always on. Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com> Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 31 7月, 2012 1 次提交
-
-
由 Will Deacon 提交于
If the SHMLBA definition for a native task differs from the definition for a compat task, the do_shmat() function would need to handle both. This patch introduces COMPAT_SHMLBA, which is used by the compat shmat syscall when calling the ipc code and allows architectures such as AArch64 (where the native SHMLBA is 64k but the compat (AArch32) definition is 16k) to provide the correct semantics for compat IPC system calls. Cc: David S. Miller <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Arnd Bergmann <arnd@arndb.de> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 7月, 2012 1 次提交
-
-
由 Alan Cox 提交于
Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=43871 Reported-by: <dcb314@hotmail.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NChris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 06 7月, 2012 1 次提交
-
-
由 Myron Stowe 提交于
The PCI core provides a generic pcibios_setup() routine. Drop this architecture-specific version in favor of that. Signed-off-by: NMyron Stowe <myron.stowe@redhat.com> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 21 6月, 2012 1 次提交
-
-
由 Geert Uytterhoeven 提交于
commit a2d063ac ("extable, core_kernel_data(): Make sure all archs define _sdata") missed xtensa. Xtensa does have a start of data marker, but calls it _fdata, causing kernel/built-in.o:(.text+0x964): undefined reference to `_sdata' _stext was already defined, but it was duplicated by _fdata. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 6月, 2012 1 次提交
-
-
由 Yinghai Lu 提交于
Replace the struct pci_bus secondary/subordinate members with the struct resource busn_res. Later we'll build a resource tree of these bus numbers. [bhelgaas: changelog] Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-