Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 20 10月, 2007 1 次提交
  3. 18 10月, 2007 1 次提交
    • S
      [CIFS] fix bad handling of EAGAIN error on kernel_recvmsg in cifs_demultiplex_thread · c18c732e
      由 Steve French 提交于 
      When kernel_recvmsg returns -EAGAIN or -ERESTARTSYS, then
cifs_demultiplex_thread sleeps for a bit and then tries the read again.
When it does this, it's not zeroing out the length and that throws off
the value of total_read. Fix it to zero out the length.

Can cause memory corruption:
If kernel_recvmsg returns an error and total_read is a large enough
value, then we'll end up going through the loop again. total_read will
be a bogus value, as will (pdu_length-total_read). When this happens we
end up calling kernel_recvmsg with a bogus value (possibly larger than
the current iov_len).

At that point, memcpy_toiovec can overrun iov. It will start walking
up the stack, casting other things that are there to struct iovecs
(since it assumes that it's been passed an array of them). Any pointer
on the stack at an address above the kvec is a candidate for corruption
here.

Many thanks to Ulrich Obergfell for pointing this out.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      c18c732e
  5. 17 10月, 2007 1 次提交
  7. 05 10月, 2007 1 次提交
    • S
      [CIFS] Fix cifsd so shuts down when signing fails during mount · a013689d
      由 Steve French 提交于 
      Fixes two problems:
1) we dropped down to negotiating lanman if we did not recognize the
mechanism (krb5 e.g.)
2) we did not stop cifsd (thus will fail when doing rmod cifs with
slab free errors) when we fail tcon but have a bad session (which is
the case in which signing is required but we don't allow signing on
the client)

It also turns on extended security flag in the header when passing
"sec=krb5" on mount command (although kerberos support is not done of
course)
Acked-by: NJeff Layton <jlayton@redhat.com>
CC: Shaggy <shaggy@us.ibm.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      a013689d
  9. 04 10月, 2007 1 次提交
  11. 29 9月, 2007 1 次提交
  13. 25 9月, 2007 1 次提交
  15. 20 9月, 2007 2 次提交
  17. 15 9月, 2007 2 次提交
  19. 31 8月, 2007 3 次提交
  21. 19 7月, 2007 1 次提交
  23. 18 7月, 2007 2 次提交
    • S
      [CIFS] More whitespace/formatting fixes (noticed by checkpatch) · 63135e08
      由 Steve French 提交于 
      Signed-off-by: NSteve French <sfrench@us.ibm.com>
      63135e08
    • R
      Freezer: make kernel threads nonfreezable by default · 83144186
      由 Rafael J. Wysocki 提交于 
      Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      83144186
  25. 13 7月, 2007 1 次提交
  27. 10 7月, 2007 1 次提交
  29. 09 7月, 2007 1 次提交
  31. 28 6月, 2007 1 次提交
  33. 26 6月, 2007 1 次提交
  35. 25 6月, 2007 1 次提交
  37. 24 5月, 2007 1 次提交
  39. 23 5月, 2007 1 次提交
  41. 05 5月, 2007 1 次提交
    • J
      [CIFS] Make sec=none force an anonymous mount · 8426c39c
      由 Jeff Layton 提交于 
      We had a customer report that attempting to make CIFS mount with a null
username (i.e. doing an anonymous mount) doesn't work. Looking through the
code, it looks like CIFS expects a NULL username from userspace in order
to trigger an anonymous mount. The mount.cifs code doesn't seem to ever
pass a null username to the kernel, however.

It looks also like the kernel can take a sec=none option, but it only seems
to look at it if the username is already NULL. This seems redundant and
effectively makes sec=none useless.

The following patch makes sec=none force an anonymous mount.
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      8426c39c
  43. 03 5月, 2007 1 次提交
  45. 01 5月, 2007 1 次提交
    • S
      [CIFS] UID/GID override on CIFS mounts to Samba · 4523cc30
      由 Steve French 提交于 
      When CIFS Unix Extensions are negotiated we get the Unix uid and gid
owners of the file from the server (on the Unix Query Path Info
levels), but if the server's uids don't match the client uid's users
were having to disable the Unix Extensions (which turned off features
they still wanted).   The changeset patch allows users to override uid
and/or gid for file/directory owner with a default uid and/or gid
specified at mount (as is often done when mounting from Linux cifs
client to Windows server).  This changeset also displays the uid
and gid used by default in /proc/mounts (if applicable).

Also cleans up code by adding some of the missing spaces after
"if" keywords per-kernel style guidelines (as suggested by Randy Dunlap
when he reviewed the patch).
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      4523cc30
  47. 27 4月, 2007 1 次提交
  49. 25 4月, 2007 1 次提交
    • S
      [CIFS] Add IPv6 support · 5858ae44
      由 Steve French 提交于 
      IPv6 support was started a few years ago in the cifs client, but lacked a
kernel helper function for parsing the ascii form of the ipv6 address. Now
that that is added (and now IPv6 is the default that some OS use now) it
was fairly easy to finish  the cifs ipv6 support.  This  requires that
CIFS_EXPERIMENTAL be enabled and (at least until the mount.cifs module is
modified to use a new ipv6 friendly call instead of gethostbyname) and the
ipv6 address be passed on the mount as "ip=" mount option.

Thanks
Signed-off-by: NSteve French <sfrench@us.ibm.com>
      5858ae44
  51. 04 4月, 2007 1 次提交
  53. 14 2月, 2007 1 次提交
  55. 08 12月, 2006 1 次提交
  57. 31 10月, 2006 1 次提交
  59. 13 10月, 2006 1 次提交
  61. 02 10月, 2006 1 次提交
  63. 30 9月, 2006 2 次提交
  65. 29 9月, 2006 1 次提交
  67. 21 9月, 2006 1 次提交