- 09 6月, 2014 10 次提交
-
-
由 Shannon Nelson 提交于
Bumpity and Fred Worm say it's time to change the numbers again. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Change-ID: I658731d022ea23cedede4be2bfecd8b4cc68d270 Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
We tell the HW upper boundary of power of 2 in VSI config, but the HW does not restrict us to use just power of 2 GPS in case of RSS as long as we are not sharing the RSS table with another VSI (VMDq). We at present are not doing RSS in VMDq VSI. If we were to enable that and if the system had CPU count which was not power 2, the VMDq VSIs will see a little skewed distribution. Change-ID: I3ea797ce9065a3ca4fc4d04251bf195463410473 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
FD_SB and FD_ATR needs to be checked independently in order to decide if we will support multiple queues or not. Change-ID: I9d3274f5924c79e29efdbcf66a2fcca1fee2107f Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Frank Zhang 提交于
Modify the logic in i40e_determine_queue_usage() so that SR-IOV doesn't get turned off unnecessarily. Change-ID: I86ca304fa9f742a50e9ea831b887f358a6a9d53d Signed-off-by: NFrank Zhang <frank_1.zhang@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
This patch changes the way resources are distributed to special features. Change-ID: I847e49d714a1d70e97f3f994cb39bfb5e02ab016 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Our hardware supports VF antispoofing for both MAC addresses and VLANs. Enable this feature by default for all VFs and implement the netdev op to control it from the command line. Change-ID: Ifb941da22785848aa3aba6b2231be135b8ea8f31 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
We don't need to complain in the log about mac addresses that can't be deleted because they don't exist. Change-ID: I4e6370df175bf72726f06d2206c03bcbfded8387 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
This was a vestige of early driver development that no longer has any actual use. Change-ID: I95b5b19c4bbfaff8759197af671ebaf716cb6ab5 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
The number of VSIs that the firmware reports to us is a guaranteed minimum, not an absolute maximum. The hardware actually supports far more than the reported value, which we often need. To allow for this, we allocate space for a larger number of VSIs than is guaranteed by the firmware, with the knowledge that we may fail to get them all in the future. Note that we are just allocating pointers here, the actual (much larger) VSI structures are allocated on demand. Change-ID: I6f4e535ce39d3bf417aef78306e04fbc7505140e Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Check for error status bits on the AdminQ event queue and announce them if seen. If the Firmware sets these bits, it will trigger an AdminQ interrupt to get the driver's attention to process the ARQ, which will likely be enough to clear the actual issue. Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Change-ID: I009e0ebc8be764e40e193b29aed2863f43eb5cb0 Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 08 6月, 2014 8 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.4.5 and i40evf to 0.9.29. Change-ID: I9faca5544446518c5425612e733499cf16ef20a1 Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Remove two device IDs 1582 and 1573, because they will not be shipped. Change-ID: Ica2e550b5b21a69e3f353eba2fe5e1c532a548c4 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
Fix a coding error where during the registration for NAPI the driver requested 256 budget. The max recommended value for this is NAPI_POLL_WEIGHT or 64. Change-ID: I03ea1e2934a84ff1b5d572988b18315d6d91c5c6 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Both the PF side and the VF side of the VF reset process are too noisy. We already warn the user that a reset is happening, and that is sufficient. Because some of these message are inside if statements, we have to rejigger the brackets at the same time to keep our coding style consistent. Change-ID: Id175562fb0ec7c396d9de156b4890e136f52d5f4 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Once more, with feeling: not all VSIs have rings. To assume so is to invite null pointers to your party. Change-ID: I576858824468d9712d119fa1015a1f28c27712c4 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Be sure to clear PXE mode bit on each reset after AdminQ has been rebuilt. Change-ID: I992d8c79594f8ca0660c50844ace675ecb9c9bf2 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Akeem G Abodunrin 提交于
This patch fixes an issue where FD SB/ATR and NTUPLE configurations status are reported erroneously. Without this patch, driver reports FDir without further information. Change-ID: I5bdd2871b7f2db1e5f5e76c741ae6a0dc603b453 Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Akeem G Abodunrin 提交于
1. There is no ixgbe_watchdog_task function in the driver, so change the comment to the correct function name, i40e_watchdog_subtask. 2. Remove num_msix_entries from interrupt set_up routine because it is never used. 3. Remove some TBD comments that are not needed. Change-ID: I37697a04007074b797f85fd83d626672e4df1ad1 Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 06 6月, 2014 8 次提交
-
-
由 Catherine Sullivan 提交于
Bump i40e to 0.4.3 and i40evf to 0.9.27. Change-ID: I4141e9f8615bdcfa3b1b5ecbc2ac62603a03b7ad Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Use an extra state variable to keep track of when the IRQs are fully set up. This keeps us from trying to unhook IRQs that already were left unhooked in a failed reset recovery, e.g. when firmware is broken. Change-ID: I073eb081e4ef8aedcbdf1ee0717c0ed64fa172f2 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
If a reset recovery failed (e.g. firmware is broken), the HMC space won't get set up. We don't need to try to delete it if it didn't get set up. This stops some needless error messages when we already know we need to just tear things down. Change-ID: Iac600481765e20b136052b43a544e55d7870268b Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The i40e driver should print link messages like all the other Intel Ethernet drivers. Change-ID: Ia88bdb96794e17a3962fcea94db176de01f921f7 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Add the missing unicast, multicast, and broadcast stats for the port. Change-ID: Ifc366d7b7745f70eaac9d00eeb0694eb9ec076a9 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Matt Jared 提交于
Add a function which indicates our intention to enable or disable a particular Tx queue. Also add a function to notify the device's Tx unit that we're about to enable or disable a Tx queue. Change-ID: I6adf3cbb5bb3e3c984d1ec969e06577c19ef296d Signed-off-by: NMatt Jared <matthew.a.jared@intel.com> Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver and hardware are not expected to work correctly with revision_id 0 hardware. Don't prevent the user from using it, but be sure to print a warning. Change-ID: I3712d34752bfad458078a5f35dfd0aa0ae9fd20e Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
When the VEB is created for the basic LAN device and its VSIs, we need to set the tracking lan_veb index for later use. Change-ID: I66bb74993bbda3621ca557437cb4b3517f9b315b Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 05 6月, 2014 6 次提交
-
-
由 Shannon Nelson 提交于
Add a couple more statistics that the hardware offers but aren't part of the standard netdev stats. Change-ID: I201db2898f2c284aee3d9631470bc5edd349e9a5 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
The rx_errors (GLV_REPC) and rx_missed (GLV_RMPC) were removed from the chip design. Change-ID: Ifdeb69c90feac64ec95c36d3d32c75e3a06de3b7 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Shannon Nelson 提交于
Pull the PF stat collection out of the VSI collection routine, and add a unifying stats update routine to call the various stat collection routines. Change-ID: I224192455bb3a6e5dc0a426935e67dffc123e306 Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This change moves some common code in two places into a small helper function, and corrects a bug in one of the two places in the process. Change-ID: If3bba7152b240f13a7881eb0e8a781655fa66ce7 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Mitch Williams 提交于
Currently, the PF driver only notifies the VFs for PF reset events. Instead, notify the VFs for all types of resets, so they can attempt a graceful reinit. Change-ID: I03eb7afde25727198ef620f8b4e78bb667a11370 Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was allowing the user to set larger size MTU than the hardware was being configured to support. The driver was already using VLAN_HLEN when setting the hardware max receivable frame size, so just add it to the netdev MTU set entry point as well. Change-ID: Ie20e2a35d04f8c411253e255bea79ca69aaeaea3 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 29 5月, 2014 4 次提交
-
-
由 Akeem G Abodunrin 提交于
If pf_reset failed, it becomes necessary to clear recovery pending bit, instead of falling through the setup process. Change-ID: Ic1611e6a32741fe3a2782ec7be173cb65e7492ed Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: NJim Young <jamesx.m.young@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The storm control features are not part of the hardware and mistakenly were left in the code. Remove them as they are not needed any more. Change-ID: I6e9277c8da2c52e69348a657bae25271449c2099 Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Anjali Singhai Jain 提交于
We have a function to calculate this, so update the code to use the function. Change-ID: Ia345b6fe6ec7f0b2dcf1199471b0d0f959ad3908 Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Akeem G Abodunrin 提交于
This patch changes the declaration of Tx/Rx rings inside several loops. It eliminates declaring the same rings every time for the duration of the loop, instead declaring them once before the loop. Change-ID: I59dea54276f18c47dca522f520c18f65fe42a15d Signed-off-by: NAkeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 24 5月, 2014 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 5月, 2014 1 次提交
-
-
由 Stephen Hemminger 提交于
Remove cases where useless bare return is left at end of function. Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 21 5月, 2014 2 次提交
-
-
由 Jean Sacren 提交于
The commit 6c167f58 ("i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()") introduced a new function i40e_vsi_open() with the regression by a typo. Due to the commit, the wrong error code would be passed to i40e_open(). Fix this error in i40e_vsi_open() by turning the macro into a negative value so that i40e_open() could return the pertinent error code correctly. Fixes: 6c167f58 ("i40e: Refactor and cleanup i40e_open(), adding i40e_vsi_open()") Signed-off-by: NJean Sacren <sakiwit@gmail.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
The call to i40e_alloc_vfs needs to be wrapped in CONFIG_PCI_IOV because the function itself is wrapped in the same conditional compile block. Change-ID: I663c5f1b85e5cfba0b36da8966f7db1a034f408b Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NKavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-