Clevo machines with ALC880 are all well with proper BIOS setup.
It seems still requiring the additional COEF setup for the EAPD.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Refactor the DAC filling function to be used for both the primary
line outputs and extra outputs using the individual badness tables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Medion W810 with ALC880 has a typical BIOS bug, copying the
pin-defaults without disabling the unused pins.  At least, the pin
0x17 must be disabled.  Also, it requires GPIO-2 setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC880 model=lg could work fine with the auto-parser due to the recent
rewrite, but it still needs the manual adjustment; namely, the BIOS leaves
unused pins as some real active jacks.  This confuses the parser.
Thus we just cover these pins and override the pin-configs as a fix-up.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Try harder to fit the multi-io pins also by checking the hard-wired
connections for multi-ios.  Also, the badness values are adjusted to
prioritize the multi-ios as more valuable.  These changes will enable
the multi-io on some machines without losing the current capability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far, the Realtek driver tires to assign the single-connected routes
for all pins only once at the beginning.  However, since some DACs have
been already mapped, the rest pins might have also single conections.

In this patch, the driver does the single-connection assignment in a
loop until all possbile single-connections are checked.  This will
improve the DAC assignment, e.g. for ASUS G72.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch improves the Realtek auto-parser for assigning the DACs and
mixers in more suitable ways by evaluating the assignment with "badness"
calculations.

When assigning a DAC hinders the assignment of individual DACs for
other pins, some badness point is given.  Similarly, when it blocks the
assignment of unique mixer controls, another badness point is added.
Also, if no DAC, even shared DAC, can be assigned, more badness is
pointed.  Finally, comparing the accumulated badness, the best route is
chosen among several trials.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the connections from the pin selector contain only two
widgets, a route to DAC and the aa-mixer, it's certainly a
single connection.  In such a case, get_dac_if_single() should
return the connected DAC, too.

This will improve the detection of the individual DAC
assignment for each pin.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The fix for bitmap-overflow in Realtek codec driver is needed for the
further development of the auto-parser with badness evaluation.

The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix
missing volume controls with ALC260] is too narrow for some codecs,
which may have more NIDs than 0x20, thus it may overflow the bitmap
array on them.

Just double the number to cover all and also add a sanity-check code
to be safer.

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We've enabled the static fixups for ASUS machines with ALC269 codec,
just for making things compatible during the transition to the auto-
parser.  However, it seems that the static configurations do more harmful
than good, as some of entries don't match with the actual hardware setups.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can clean up all static quirks for ALC260.
Also many codes in alc_quirks.c can be ripped off since they have been
used only by ALC260 static quirks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The model works with the auto-parser as is, thus now good to drop.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's working with the auto-parser just with the standard GPIO 1 setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1
per the jack state, in addition to the COEF setup used for other Acer
laptops.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The support for Replacer 627V in the auto-parser needs the unique unsol
event handling: although the machine has a single output pin 0x0f, it's
used for both the headphone and the speaker, and the driver needs to
toggle the output route via GPIO 1.

In addition, it needs a special COEF setup with 0x3050.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC260 model=acer needs GPIO1 setup.  It could be selected well
if the codec SSID is set properly by BIOS, but to make sure, enable it
forcibly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The model=will for ALC260 requires the pin 0x0f to be a headphone and
some special verbs for the COEF to turn on the amp.  Now added these as
fixup entries and removed the static model quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A malicious USB device could feed in a large nr_rates value.  This would
cause the subsequent call to kmemdup() to allocate a smaller buffer than
expected, leading to out-of-bounds access.

This patch validates the nr_rates value and reuses the limit introduced
in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow
in parse_uac2_sample_rate_range()").
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: https://bugs.launchpad.net/bugs/930842

The reporter states that audio is inaudible by default without muting
'External Amplifier'. Add a quirk to handle his SSID so that changing
the control is not necessary.
Reported-and-tested-by: NBenjamin Carlson <elderbubba0810@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A simple fix from Morimoto-san for the pointer() operation in the FSI
driver.

Conflicts:
	sound/pci/hda/patch_realtek.c

Merged back the fix for Acer Aspire 6935 with ALC889 codec.
The fix commit was based on 3.2 kernel so that it can be applied to
stable kernel cleanly.

Since 3.2 kernel, the driver starts trying to assign the multi-io DACs
before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for
the speaker for a standard laptop setup like a HP, a speaker, a mic-in
and a line-in.  However, on Acer Aspire 6935, it seems that the
speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it
results in silence by some reason, although the codec itself allows
the routing to DAC3/4.

As a workaround, the connection list of each pin is reduced to be
mapped to either only DAC1/2 or DAC3/4, so that the compatible
assignment as in kernel 3.1 is achieved.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740

Cc: <stable@kernel.org> [v3.2+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

VT1705 codec has two ADCs where the secondary ADC has no MUX but only
a fixed connection to the mic pin.  This confused the driver and it
tries always overriding the input-source selection by assumption of
the existing MUX for the secondary ADC, resulted in resetting the
input-source at each time PM (including power-saving) occurs.

The fix is simply to check the existence of MUX for secondary ADCs in
the initialization code.
Tested-by: NAnisse Astier <anisse@astier.eu>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add the jack-detect suppression for an ASUS machine with ALC892 codec.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42655Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few machines with ALC861 & co are reported not to work properly with
the auto-mute feature in software.  The auto-mute feature is implemented
in the hardware level, and the jack-detection never works with them.

Also, rename the fixup index as ALC861_FIXUP_* to follow the standard.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new flag to indicate that the codec has no jack-detection cap.
This flag should be set for hardwares that have no jack-detect
implementation although the codec chip itself supports it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It's a bit too big and used too often as an inline function.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Necessary for working on the jack-detection suppression feature.

current fsi_pointer() calculation was not correct for FSI driver.
This patch fix it up.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The new HP laptops turns off the mute LED with VREF50 or VREF80, but
not in HIZ unlike the previous models.  Since VREF50 (also 80) works
with the previous models, let's use VREF50 for all.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A few small WM8994 updates to go on top of the previous lot of things
that were sent.  They collide with some -next work so I'd really like to
get them into 3.3-rc3 if possible to merge back up into the -next code.
All driver specific and unexciting in the grand scheme of things.

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

The driver accidentally exchanged the left/right fields for stereo AC'97
mixer registers.  This affected only the aux and CD inputs because the
line input bypasses the AC'97 codec and the mic input is mono; cards
without AC'97 (Xonar DS/DG/HDAV Slim, HG2PCI, HiFier) were not affected.
Reported-and-tested-by: NAbby Cedar <abbycedar@yahoo.com.au>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Cc: 2.6.31+ <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds the HD Audio DeviceIDs for the Intel Lynx Point PCH.
Signed-off-by: NSeth Heasley <seth.heasley@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This hardware requires same fixup for the node 0x0f like Asus A6Rp.
More information: https://bugzilla.redhat.com/show_bug.cgi?id=785417Signed-off-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In patch_ca0132.c, the error returned from chipio_write() isn't checked
always.  Also, the power-up/down sequence isn't tracked properly in some
error paths.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>