SPEAr SoCs used its own clock framework since now. From now on they will move to
use common clock framework.

This patch updates existing SPEAr machine support to adapt for common clock
framework.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Reviewed-by: NMike Turquette <mturquette@linaro.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>

All SPEAr SoC's use ST's Timer module. This patch adds device tree probing
capability for that.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The register and irq definitions in mach/*.h for spear3xx and
spear6xx are now mostly obsolete, after the platforms have been
converted to device tree based probing and the data is now
part of the device tree files.

The misc_regs.h contents are moved into clock.c because that is
the only user, aside from the DMA_CHN_CFG that should eventually
get handled differently. Some of the contents of mach/spear.h
still remain, because they are used to set up the static map table,
timer, uart and auxdata tables, but almost everything got removed.
We might remove everything but the map table as the DT conversion
completes, but that is not a priority. I've also made sure to
make both copies of spear.h more or less identical so we can
eventually combine them.

The spear3?0.h files were only used by the spear3?0.c files, so I
merged the contents in there and removed the bits that were unused.
This is something that should still be looked at.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NViresh Kumar <viresh.kumar@st.com>

Both SPEAr3xx and SPEAr6xx families have one instance of ARM PL080 DMA
controller. This patch adds in support for that.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>

This patch adds a generic target for SPEAr600 board that can be
configured via the device-tree. Currently the following devices
are supported via the devicetree:

- VIC interrupts
- PL011 UART
- PL061 GPIO
- Synopsys DW I2C
- Synopsys DW ethernet

Other peripheral devices (e.g. SMI flash, FSMC NAND flash etc) will
follow in later patches.

Only the spear600-evb is currently supported. Other SPEAr600
based boards will follow later.

Since the current mainline SPEAr600 code only supports the SPEAr600
evaluation board, with nearly zero peripheral devices (only UART
and GPIO), it makes sense to switch over to DT based configuration
completely now. So this patch also removes all non-DT stuff, mainly
platform device data. The files spear600.c and spear600_evb.c are
removed completely.
Signed-off-by: NStefan Roese <sr@denx.de>
Acked-by: NViresh Kumar <viresh.kumar@st.com>
Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Acked-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Define common clk_init routine in plat/clock.c for calling recalc_root_clocks.
This routine will be used for any common code across all machine families.
Whereas family specific spear*xx_clk_init routines will be used for family
specific code.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Resource size required mostly is 4K for all devices, whereas currently
reserved space is much beyond that. This patch replaces SIZE macro's used at
multiple places with SZ_4K.
Reviewed-by: NStanley Miao <stanley.miao@windriver.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch makes inclusion of hardware.h and spear.h consistent over all spear
variants. Now we will include hardware.h, wherever we need to use hardware
macros. spear.h will be automatically included by hardware.h
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Order of inclusion of .h files must be: <linux/...>, <asm/...>, <plat/...>,
<mach/...>. This patch corrects this ordering whereever it is not followed.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move platform specific timer initialization code is moved into platform
specific files.
Reviewed-by: NJamie Iles <jamie@jamieiles.com>
Reviewed-by: NStanley Miao <stanley.miao@windriver.com>
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Remove duplicated #include('s) in
  arch/arm/mach-spear6xx/spear6xx.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Reviewed-by: NLinus Walleij <linux.walleij@stericsson.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>