- 25 4月, 2008 15 次提交
-
-
由 Michael Krufky 提交于
Store a pointer to the device name in the name field of struct tuner_i2c_props, so that we can remove the printk macros defined in tuner-i2c.h Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Create a macro implementing a standard method to share state amongst multiple instances of a hybrid tuner object. Also, prepare tuner_foo printk macros for the removal of PREFIX Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
I'd prefer to leave this here, but official CodingStyle doesn't care what I think :-/ Remove the emacs format override block to comply with Kernel CodingStyle. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Move the switch..case blocks with device-specific code from functions simple_set_tv_freq and simple_set_radio_freq ...into three new functions: simple_std_setup, simple_post_tune and simple_radio_bandswitch Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
If simple_tuner_attach fails, set t->type to TUNER_ABSENT, set t->mode_mask to T_UNINITIALIZED, and exit the set_type function. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
This patch fully removes the dependency of tuner-core on tuner-types. There is no longer any need to pass struct tunertype in attach-time config structure - instead pass the tuner type ID. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Move tuner type ID check from tuner-core::set_type to simple_tuner_attach. Since tuner-core forwards all attach requests to tuner-simple as the default case, unless a specific attach function is specified in set_type, this change is an appropriate cleanup. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
tuner-types is needed for tuner-simple, and does not need to be bound to tuner-core. Any caller of tuner-simple, including tuner-core, needs to pass a structure from tuner-types into tuner-simple at attach-time. Export the two needed symbols from tuner-types for now, so that card-level drivers can attach tuner-simple for hybrid dvb_frontend devices. We will remove this dependency altogether as tuner refactoring phase 3 progresses. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
fix debug in simple_config_lookup to display frequency in MHz Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Move some reuseable code out of simple_set_tv_freq into separate functions. Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- Static memory is always initialized with 0. - Replaced in some cases C99 comments for /* */ Signed-off-by: NDouglas Schilling Landgraf <dougsland@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
dump_firm_type_and_int_freq() can become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
struct XC5000_Standard[] can become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Reviewed-by: NSteven Toth <stoth@hauppauge.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Adrian Bunk 提交于
This patch makes the following needlessly global functions static: - ivtv_yuv_next_free() - ivtv_yuv_setup_frame() - ivtv_yuv_udma_frame() Signed-off-by: NAdrian Bunk <bunk@kernel.org> Reviewed-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
由 Michael Krufky 提交于
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-
- 24 4月, 2008 1 次提交
-
-
由 Len Brown 提交于
PNP_MAX_IRQ is 2 If a device invokes pnpacpi_parse_allocated_irqresource() 0, 1, or 2 times, we are happy. The 3rd time, we will fail and print "pnpacpi: exceeded the max number of IRQ resources: 2" The 4th and subsequent calls (if this ever happened) would silently scribble on irq_resource[2], which doesn't actualy exist. Found-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 4月, 2008 24 次提交
-
-
由 Tomas Winkler 提交于
This patch fixes problem in Makefile that prevented built-in compilation of iwlcore Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile more concise") Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NYi Zhu <yi.zhu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
The LEDS infrastructure itself does not require anything that a platform dependant upon HAS_IOMEM. The individual drivers do, but they are properly guarded with the necessary platform dependencies. One can even imagine a hypervisor based LED driver that a platform without HAS_IOMEM might have. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Commit 88452565 ("PCI: clean up resource alignment management") didn't set the alignment information for the cardbus window resources, causing their subsequent allocations to fail miserably with a message like yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions yenta_cardbus: probe of 0000:15:00.0 failed with error -16 or similar. This fixes it and clarifies the code a bit too (we used to have to use the insane PCI bridge alignment logic that put the alignment in the "start" field, this makes it use the slightly easier-to-understand size-based alignment, and allows us to set the resource start to zero until it gets allocated). Reported-and-tested-by: NJeff Chua <jeff.chua.linux@gmail.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Prevent bus_remove_device() from crashing if dev->knode_bus has not been initialized before it's called. This can happen if the device_add() ended up breaking out early due to an error, for example. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Do not refuse to actually register children of suspended devices, but still warn about attempts to do that. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dean Nelson 提交于
Addressed issues raised by scripts/checkpatch.pl. Removed unnecessary curly braces. Eliminated uses of volatiles and use of kernel_thread() and daemonize(). Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Dean Nelson 提交于
Ran patches through scripts/Lindent (part 2). Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Dean Nelson 提交于
Ran patches through scripts/Lindent (part 1). Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Dean Nelson 提交于
Move XPC and XPNET from arch/ia64/sn/kernel to drivers/misc/sgi-xp. Signed-off-by: NDean Nelson <dcn@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Petr Tesarik 提交于
While looking at the implementation of the Ram backed block device driver, I stumbled across a write-only local variable, which makes little sense, so I assume it should actually work like this: Signed-off-by: NPetr Tesarik <ptesarik@suse.cz> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable I2C platform drivers, to allow module auto loading. [ db: add some more drivers ] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Magnus Damm 提交于
This is V5 of the SuperH Mobile I2C Controller Driver. A simple Master only driver for the I2C block included in processors such as sh7343, sh7722 and sh7723. Tested on a sh7722 MigoR using a rs5c732b rtc. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Adrian Bunk 提交于
Don't use 0 as NULL pointer. Spotted by sparse. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans Schillstrom 提交于
Move init_completion to just before i2c transfer. http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=3385Signed-off-by: NHans Schillstrom <hans.schillstrom@shlsys.com> Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
Simply use "depends on BLACKFIN" (which is technically correct) and just document which machines have the device. Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Mike Frysinger 提交于
i2c-bfin-twi: Use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
Blackfin TWI controller hardware pin should be requested from GPIO port controller Before BF54x, there is no need to do this. But as long as BF54x and BF52x are supported by this generic driver, the missing pin mux operation should be added. Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Bryan Wu 提交于
- Dynamic alloc the resource of TWI driver data according to board information - TWI register read/write accessor based on dynamic regs_base - Support TWI0/TWI1 for BF54x Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Sonic Zhang 提交于
- Create a new mode TWI_I2C_MODE_REPEAT. - No change to smbus operation. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-