- 18 2月, 2010 1 次提交
-
-
由 Rafał Miłecki 提交于
Fixes fdo bug #26329 Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Tested-by: NTobias Jakobi <liquid.acid@gmx.net> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 2月, 2010 1 次提交
-
-
由 Jerome Glisse 提交于
There is 3 different distinct states for an indirect buffer (IB) : 1- free with no fence 2- free with a fence 3- non free (fence doesn't matter) Previous code mixed case 2 & 3 in a single one leading to possible catastrophique failure. This patch rework the handling and properly separate each case. So when you get ib we set the ib as non free and fence status doesn't matter. Fence become active (ie has a meaning for the ib code) once the ib is scheduled or free. This patch also get rid of the alloc bitmap as it was overkill, we know go through IB pool list like in a ring buffer as the oldest IB is the first one the will be free. Fix : https://bugs.freedesktop.org/show_bug.cgi?id=26438 and likely other bugs. V2 remove the scheduled list, it's useless now, fix free ib scanning Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 11 2月, 2010 2 次提交
-
-
由 Dave Airlie 提交于
this uses a new entrypoint to invalidate gart entries instead of using 0. Changed to rather than pointing to 0 address point empty entry to dummy page. This might help to avoid hard lockup if for some wrong reasons GPU try to access unmapped GART entry. I'm not 100% sure this is going to work, we probably need to allocate a dummy page and point all the GTT entries at it similiar to what AGP does. but we can test this first I suppose. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This patch add cs checker to r600/r700 hw. Command stream checking will rewrite some of the cs value in order to restrict GPU access to BO size. This doesn't break old userspace but just enforce safe value. It should break any things that was using the r600/r700 cs ioctl to do forbidden things (malicious software), though we are not aware of such things. Here is the list of thing we check : - enforcing resource size - enforcing color buffer slice tile max, will restrict cb access - enforcing db buffer slice tile max, will restrict db access We don't check for shader bigger than the BO in which they are supposed to be, such use would lead to GPU lockup and is harmless from security POV, as far as we can tell (note that even checking for this wouldn't prevent someone to write bogus shader that lead to lockup). This patch has received as much testing as humanly possible with old userspace to check that it didn't break such configuration. However not all the applications out there were tested, thus it might broke some odd, rare applications. [airlied: fix rules for cs checker for parallel builds] Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 2月, 2010 11 次提交
-
-
由 Alex Deucher 提交于
This adds initial Evergreen KMS support, it doesn't include any acceleration features or interrupt handling yet. Major changes are DCE4 handling for PLLs for the > 2 crtcs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This add an utilities function radeon_ib_bogus_add which will save an ib into a list of ib which can then be dumped using debugfs. Once dumped the ib is removed from the list. This should allow to save & capute ib for further debugging. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
This already simplifies code significally and makes it maintaible in case of adding memory reclocking plus voltage changing in future. Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
not hooked up yet. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The idea is to flag a power state with a certain type and use that type to decide on what state to select. On r6xx+, we select a state and then transition between clock modes in that state. On pre-r6xx, we transition between states directly. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The general idea is to validate the current hw state against the set of power states and select a power state based on that. This patch just pulls the power states from the bios and prints the information. It is not currently hooked up in the actual power management code. Hooking it up will require reworking the the current power state selection code and will be handled in a future patch. Additionally, we'd need to decide on some default lower power states for cards without power tables. v2 - increment state_index after checking for default state v3 - fix typo in pm init on pre-atom cards, handle pre-atom cards without x86 bioses Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Currently unused. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Rafał Miłecki 提交于
V2: reorganize functions, fix modesetting calls V3: rebase patch, use radeon's workqueue V4: enable on tested chipsets only, request VBLANK IRQs V5: enable PM on older hardware (IRQs, mode_fixup, dpms) V6: use separate dynpm module parameter V7: drop RADEON_ prefix, set minimum mode for dpms off V8: update legacy encoder call, fix order in rs600 IRQ V9: update compute_clocks call in legacy, not only DPMS_OFF Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Set the number of crtcs in rdev at crtc init and use it whenever we need the crtc count rather than recalculating it everytime. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
wire hw i2c support into radeon i2c algo. fixes merged: - handle bus probing correctly - use meaningful error numbers - abort if transaction fails - The line mapping is different depending on the asic. - protect hw i2c engine with a mutex - rs300 doesn't have a pin select bit - r200 has a different pin select setup Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 05 2月, 2010 2 次提交
-
-
由 Jerome Glisse 提交于
In suspend path we unmap the GART table while in cleaning up path we will unbind buffer and thus try to write to unmapped GART leading to oops. In order to avoid this we don't call the suspend path in cleanup path. Cleanup path is clever enough to desactive GPU like the suspend path is doing, thus this was redondant. Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE) Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
It seems that some R6XX/R7XX silently ignore HDP flush when programmed through ring, this patch addback an ioctl callback to allow R6XX/R7XX hw to perform such flush through MMIO in order to fix a regression. For more details see: http://bugzilla.kernel.org/show_bug.cgi?id=15186Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 01 2月, 2010 1 次提交
-
-
由 Jerome Glisse 提交于
If an error happen in r600_blit_prepare_copy report it rather than WARNING and keeping execution. For instance if ib allocation failed we did just warn about but then latter tried to access NULL ib ptr causing oops. This patch also protect r600_copy_blit with a mutex as otherwise one process might overwrite blit temporary data with new one possibly leading to GPU lockup. Should partialy or totaly fix: https://bugzilla.redhat.com/show_bug.cgi?id=553279 V2 failing blit initialization is not fatal, fallback to memcpy when this happen V3 init blit before startup as we pin in startup, remove duplicate code (this one was actualy tested unlike V2) Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 1月, 2010 3 次提交
-
-
由 Jerome Glisse 提交于
This patch workaround a possible security issue which can allow user to abuse drm on r6xx/r7xx hw to access any system ram memory. This patch doesn't break userspace, it detect "valid" old use of CB_COLOR[0-7]_FRAG & CB_COLOR[0-7]_TILE registers and overwritte the address these registers are pointing to with the one of the last color buffer. This workaround will work for old mesa & xf86-video-ati and any old user which did use similar register programming pattern as those (we expect that there is no others user of those ioctl except possibly a malicious one). This patch add a warning if it detects such usage, warning encourage people to update their mesa & xf86-video-ati. New userspace will submit proper relocation. Fix for xf86-video-ati / mesa (this kernel patch is enough to prevent abuse, fix for userspace are to set proper cs stream and avoid kernel warning) : http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=95d63e408cc88b6934bec84a0b1ef94dfe8bee7b http://cgit.freedesktop.org/mesa/mesa/commit/?id=46dc6fd3ed5ef96cda53641a97bc68c3bc104a9f Abusing this register to perform system ram memory is not easy, here is outline on how it could be achieve. First attacker must have access to the drm device and be able to submit command stream throught cs ioctl. Then attacker must build a proper command stream for r6xx/r7xx hw which will abuse the FRAG or TILE buffer to overwrite the GPU GART which is in VRAM. To achieve so attacker as to setup CB_COLOR[0-7]_FRAG or CB_COLOR[0-7]_TILE to point to the GPU GART, then it has to find a way to write predictable value into those buffer (with little cleverness i believe this can be done but this is an hard task). Once attacker have such program it can overwritte GPU GART to program GPU gart to point anywhere in system memory. It then can reusse same method as he used to reprogram GART to overwritte the system ram through the GART mapping. In the process the attacker has to be carefull to not overwritte any sensitive area of the GART table, like ring or IB gart entry as it will more then likely lead to GPU lockup. Bottom line is that i think it's very hard to use this flaw to get system ram access but in theory one can achieve so. Side note: I am not aware of anyone ever using the GPU as an attack vector, nevertheless we take great care in the opensource driver to try to detect and forbid malicious use of GPU. I don't think the closed source driver are as cautious as we are. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
To avoid hw doing anythings after we disabled PCIE GART, fully disable IRQ at suspend. Also cleanup a bit the ih structure and process function. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
newer asics have large mmio apertures Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 14 1月, 2010 1 次提交
-
-
由 Jerome Glisse 提交于
Use same common function to disable agp so we replace the GART callback by the proper one when we do so. This fix oops if radeon_agp_init report failure. This patch also move radeon_agp_init out of *_mc_init for r600 & rv770 so that we can have a similar behavior than for previous hw, ie if agp_init fails it will fallback to GPU GART and disable AGP. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 1月, 2010 3 次提交
-
-
由 Jerome Glisse 提交于
R300 family will hard lockup if host path read cache flush is done through MMIO to HOST_PATH_CNTL. But scheduling same flush through ring seems harmless. This patch remove the hdp_flush callback and add a flush after each fence emission which means a flush after each IB schedule. Thus we should have same behavior without the hard lockup. Tested on R100,R200,R300,R400,R500,R600,R700 family. V2: Adjust fence counts in r600_blit_prepare_copy() Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Corbin Simpson 提交于
Long story short, this fixes sporadic hardlocks with my rv410 during times of intense 2D acceleration (Flash on Fx3). V2: Fix indentation and move errata_fini to suspend function so we don't leak scratch register over suspend/resume cycle. V3: Move scratch_reg to asic specific structure (aim is to slowly move stuff to asic specific structure and avoid poluting radeon_device struct with asic specific variables) Signed-off-by: NCorbin Simpson <MostAwesomeDude@gmail.com> Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This detects if the sideport memory is enabled and if it is VRAM is evicted on suspend/resume. This should fix s/r issues on some IGPs. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 23 12月, 2009 1 次提交
-
-
由 Jerome Glisse 提交于
Add boolean to record if some part of the driver are initialized or not this allow to avoid a crash when trying to cleanup uninitialized structure members. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 16 12月, 2009 2 次提交
-
-
由 Christian Koenig 提交于
Adding basic HDMI support for R600 KMS, ported from radeonhd ddx. [airlied:- checkpatch cleanups] Signed-off-by: NChristian Koenig <deathsimple@vodafone.de> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
If they are not radeon object don't do anythings special for them, this avoid rare oops than can happen in a complex use case. [airlied: additional fixups] Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 10 12月, 2009 2 次提交
-
-
由 Alex Deucher 提交于
Supported on all AVIVO-based asics. Can be disabled via the new_pll module parameter: new_pll=0 - disable new_pll=1 - enable enabled by default [airlied: fixed to use do_div] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
This convert radeon to use new TTM validation API, it doesn't really take advantage of it beside in the eviction case. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 08 12月, 2009 4 次提交
-
-
由 Alex Deucher 提交于
This enabled interrupt driven hpd support for all radeon chips. Assuming the hpd pin is wired up correctly, the driver will generate uevents on digital monitor connect and disconnect and retrain DP monitors automatically. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The DDX and radeonfb always set these regs to a sane value. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 04 12月, 2009 1 次提交
-
-
由 Rafał Miłecki 提交于
Signed-off-by: NRafał Miłecki <zajec5@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 12月, 2009 5 次提交
-
-
由 Jerome Glisse 提交于
The locking & protection of radeon object was somewhat messy. This patch completely rework it to now use ttm reserve as a protection for the radeon object structure member. It also shrink down the various radeon object structure by removing field which were redondant with the ttm information. Last it converts few simple functions to inline which should with performances. airlied: rebase on top of r600 and other changes. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We really don't need to process every irq that comes in, we only really want to do SW irq processing when we are actually waiting for a fence to pass. I'm not 100% sure this is race free esp on non-MSI systems so it needs some testing. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This enables the use of interrupts on r6xx/r7xx hardware. Interrupts are implemented via a ring buffer. The GPU adds interrupts vectors to the ring and the host reads them off in the interrupt handler. The interrupt controller requires firmware like the CP. This firmware must be installed and accessble to the firmware loader for interrupts to function. MSIs don't seem to work on my RS780. They work fine on all my discrete cards. I'm not sure about other RS780s or RS880s. I've disabled MSIs on RS780 and RS880, but it would probably be worth checking on some other systems. v2 - fix some checkpatch.pl problems; re-read the disp int status reg if we restart the ih; v3 - remove the irq handler if r600_irq_init() fails; remove spinlock in r600_ih_ring_fini(); move ih rb overflow check to r600_get_ih_wptr(); move irq ack to separate function; Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
If we find a GPU but we can't find its BIOS and it isn't posted, then ignore it. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
rendercheck under kms on r600s was failing due to HDP flushing not happening. This adds HDP flushing to the object wait function for r100->r700 families. rendercheck passes basic tests on r600 with this change. Acked-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-