* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mad: Test ib_create_send_mad() return with IS_ERR(), not == NULL
  IB/mlx4: Allow 4K messages for UD QPs
  mlx4_core: Add ethernet fields to CQE struct
  IB/ipath: Fix printk format warnings
  RDMA/cxgb3: Fix deadlock initializing iw_cxgb3 device
  RDMA/cxgb3: Fix up MW access rights
  RDMA/cxgb3: Fix QP capabilities
  RDMA/cma: Remove padding arrays by using struct sockaddr_storage
  IB/ipath: Use unsigned long for irq flags
  IPoIB/cm: Set correct SG list in ipoib_cm_init_rx_wr()

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  xen-blkfront.c: make blkif_ioctl() static
  bio: make use of bvec_nr_vecs
  cciss: fix bug if scsi tape support is disabled
  cciss: add support for multi lun tape devices
  cciss: change the way we notify scsi midlayer of tape drives
  cciss: fix negative logical drive count in procfs
  cciss: remove redundant code
  cciss: make rebuild_lun_table behave better
  cciss: return -EFAULT if copy_from_user() fails

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: ASoC: fix SNDCTL_DSP_SYNC support in Freescale 8610 sound drivers

Looks like somebody didn't get enough sleep.
Noticed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  Move all of include/asm-m68knommu to arch/m68knommu/include/asm.

This driver was declared obsolete over 2 years ago, the alternative
console driver for legacy iSeries (hvc_iseries) was made the default
over 1 year ago and this driver has been build broken for over 3
months, so remove it.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (23 commits)
  V4L/DVB (8617): uvcvideo: don't use stack-based buffers for USB transfers.
  V4L/DVB (8616): uvcvideo: Add support for two Bison Electronics webcams
  V4L/DVB (8611): Add suspend/resume to pxa_camera driver
  V4L/DVB (8610): Add suspend/resume capabilities to soc_camera.
  V4L/DVB (8609): media: Clean up platform_driver_unregister() bogosity.
  V4L/DVB (8607): cxusb: fix OOPS and broken tuning regression on FusionHDTV Dual Digital 4
  V4L/DVB (8605): gspca: Fix of gspca_zc3xx oops - 2.6.27-rc1
  V4L/DVB (8604): gspca: Fix of "scheduling while atomic" crash.
  V4L/DVB (8602): gspca: Fix small bugs, simplify and cleanup ov519.
  V4L/DVB (8582): set mts_firmware for em2882 based Pinnacle Hybrid Pro
  V4L/DVB (8574): gspca: Bad bytesperlines of pixelformat in spca505/506/508 and vc023x.
  V4L/DVB (8573): gspca: Bad scan of frame in spca505/506/508.
  V4L/DVB (8572): gspca: Webcam 0c45:6143 in documentation.
  V4L/DVB (8571): gspca: Don't use CONFIG_VIDEO_ADV_DEBUG as a compile option.
  V4L/DVB (8569): gspca: Set back the old values of Sonix sn9c120 and cleanup source.
  V4L/DVB (8567): gspca: hflip and vflip controls added for ov519 - ov7670 plus init cleanup.
  V4L/DVB (8564): fix vino driver build error
  V4L/DVB (8563): fix drivers/media/video/arv.c compilation
  V4L/DVB (8562): DVB_DRX397XD: remove FW_LOADER select
  V4L/DVB (8558): media/video/Kconfig: fix a typo
  ...

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (it87) Support for 16-bit fan reading in it8705 >= rev 0x03
  hwmon: (it87) Support for 16-bit fan reading in it8712 >= rev 0x07
  hwmon: (hwmon-vid) Add 6-bit vid codes for AMD NPT 0Fh cpus
  hwmon: (hwmon-vid) Trivial format multi-line comments per CodingStyle
  hwmon: ad7414 driver
  hwmon: (thmc50) Add support for critical temperature limits
  hwmon: (adm9240) Remove EXPERIMENTAL dependency
  hwmon: (w83627hf) Drop reset module parameter
  hwmon: (w83627hf) Add pwm_enable sysfs interface
  hwmon: (w83791d) Use fan divisor bits from vbat register
  hwmon: (f71882fg) Delete needless forward declarations
  hwmon: (dme1737) Add support for the SMSC SCH5027
  hwmon: (dme1737) Skip detection if forced
  hwmon: (dme1737) Cleanups

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: (70 commits)
  [WATCHDOG] more coding style clean-up's
  [WATCHDOG] sbc8360.c - move stop code into a function
  [WATCHDOG] Coding style - Indentation - part 2
  [WATCHDOG] Coding style - Indentation - part 1
  [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs
  [WATCHDOG] mpc8xxx_wdt: fix build
  [WATCHDOG] mpc8xxx_wdt: various renames, mostly s/mpc83xx/mpc8xxx/g
  [WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt
  [WATCHDOG] mpc83xx_wdt: add support for MPC86xx CPUs
  [WATCHDOG] mpc83xx_wdt: convert to the OF platform driver
  [WATCHDOG] pcwd: a couple of watchdogs escaped conversion
  [WATCHDOG] Clean-up includes
  [WATCHDOG] hpwdt.c - fix double includes
  [WATCHDOG 57/57] wdt501/pci: Clean up, coding style and switch to unlocked_ioctl
  [WATCHDOG 56/57] wdt977: clean up, coding style and switch to unlocked_ioctl
  [WATCHDOG 55/57] wdt285: switch to unlocked_ioctl and tidy up oddments of coding style
  [WATCHDOG 54/57] wdrtas: clean up, coding style, switch to unlocked_ioctl
  [WATCHDOG 53/57] wafer5823wdt: Clean up, coding style, switch to unlocked_ioctl
  [WATCHDOG 52/57] w83977f_wdt: clean up, coding style and switch to unlocked_ioctl
  [WATCHDOG 51/57] w83877f_wdt: clean up code, coding style, switch to unlocked_ioctl
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kbuild: a better way to generate cscope database change
  Kconfig: Extend "menuconfig" for modules to simplify Kconfig file
  bugfix for scripts/patch-kernel in 2.6 sublevel stepping
  kbuild: fix O=.. build with arm

In case of error, the function ib_create_send_mad() returns an ERR
pointer, but never returns a NULL pointer.  So testing the return
value for error should be done with IS_ERR, not by comparing with
NULL.

A simplified version of the semantic patch that makes this change is
as follows:

(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@correct_null_test@
expression x,E;
statement S1, S2;
@@
x = ib_create_send_mad(...)
<... when != x = E
if (
(
- x@p2 != NULL
+ ! IS_ERR ( x )
|
- x@p2 == NULL
+ IS_ERR( x )
)
 )
S1
else S2
...>
? x = E;
// </smpl>
Signed-off-by: NJulien Brunel <brunel@diku.dk>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Current code limits the max message size to 2K for UD QPs, while MTU
might be as big as 4K.  This patch sets the maximum message size to
4K, which is needed for UD to work correctly on fabrics with a 4K MTU.
Signed-off-by: NAlex Naslednikov <xalex@mellanox.co.il>
Signed-off-by: NEli Cohen <eli@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

With the current kbuild infrastructure in place no other changes
are required for this to work.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Add ethernet-related fields to struct mlx4_cqe so that the mlx4_en
ethernet NIC driver can share the same definition.
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This reverts commit 680db013.  The label
is actually used, but hidden behind CONFIG_SND_DEBUG and the horrible
snd_assert() macro.

That macro could probably be improved to be along the lines of

	#define snd_assert(expr, args...) do { if ((void)(expr),0) { args; } } while (0)

or similar to make sure that we always both evaluate 'expr' and parse
'args', but while gcc should optimize it all away, I'm too lazy to
really verify that.  So I'll just admit defeat and will continue to live
with the annoying warning.
Noted-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Linus "Grr.." Torvalds

The bogus code to call into the n_tty layer got removed in commit
8bc5fb6a ("Remove bogons from the
iSeries console"), but it left a now uninitialized "return ret;" around.

Not that this code has ever even compiled since the BKL pushdown, since
not only is "ret" no longer initialized, it was never actually declared
even originally.

Replace it with a "return -ENOIOCTLCMD"
Pointed-out-by: NPaul Mackerras <paulus@samba.org>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes the warning

  sound/core/pcm_native.c: In function 'snd_pcm_fasync':
  sound/core/pcm_native.c:3262: warning: label 'out' defined but not used
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The it8705 chip supports 16-bit fan tachometers in revisions at least
>= 0x03 (Version G). This patch enables 16-bit fan readings on all
revisions >= 0x03 just like the it8712, it8716, and it8718 chips.
Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The it8712 chip supports 16-bit fan tachometers in revisions >= 0x07.
Revisions >= 0x08 dropped support for 8-bit fan divisor registers. The
patch enables 16-bit fan readings on all revisions >= 0x07 just like
the it8716 and it8718 chips.
Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

AMD NPT 0Fh cpus use 6 bit VID codes. Successive codes with msb 0
describe 25mV decrements, while those with msb 1 describe 12.5mV
decrements. Existing hwmon-vid.c is correct only for codes with msb 0;
add support for the codes with msb 1.

Ref:
p 309, Table 71
AMD Publication 32559, BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh Processors
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdfSigned-off-by: NFrank Myhr <fmyhr@fhmtech.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Signed-off-by: NFrank Myhr <fmyhr@fhmtech.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Driver for the Analog Devices AD7414 temperature monitoring chip.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Add critical temperature limits to the driver. These limits are read
only.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

The adm9240 driver is in the kernel for three years now, time to
remove the EXPERIMENTAL dependency.
Signed-off-by: NGrant Coady <gcoady.lk@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Drop the reset parameter of the w83627hf driver. It seems it wasn't
that useful. It was dropped from the Linux 2.4 version of this driver
back in July 2004.

The only users who have reported that they were still using this
parameter, needed it to switch the chip from automatic fan speed
control back to manual mode. Now that the driver creates pwmN_enable
sysfs files, users will be able to use these files instead, which is
way less agressive.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NDominik Geyer <dominik.geyer@gmx.de>

Adds support for pwm_enable sysfs interface for the w83627hf driver.
Signed-off-by: NDominik Geyer <dominik.geyer@gmx.de>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Update w83791d with fan bits in vbat mon register (7.48 of the
datasheet). This change allows all fans to have a divisor of 128, 
and fixes a problem with incorrectly reported fan speeds. 
Signed-off-by: NMarc Hulsman <m.hulsman@tudelft.nl>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

These functions aren't used before being defined, so there's no point
in forward-declaring them.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NHans de Goede <j.w.r.degoede@hhs.nl>

Add support for the SCH5027. The differences to the DME1737 are:
- No support for programmable temp offsets
- In auto mode, PWM outputs stay on min value if temp goes below low threshold
  and can't be programmed to fully turn off
- Different voltage scaling
- No VID input
Signed-off-by: NJuerg Haefliger <juergh@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Skip the checking of the device ID register in the hwmon register
block if the force_id option is used.
Signed-off-by: NJuerg Haefliger <juergh@gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fix names of attribute structs to make them more consistent with the 
rest of the code. Minor comment changes.

Signed-off-by: Juerg Haefliger <juergh at gmail.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

commit 9e98966c (tty: rework break handling)
forgot to update one exit point of rs_break() in the Amiga serial driver.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

More coding style clean-up's.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

It's a problem about cscope target of kernel Makefile, and the cscope
plugin of emacs:
1. `make cscope` will generate cscope.files cscope.{in,po,}.out;
2. the cscope plugin expect a cscope.out.{in,po,};
3. the default `cscope -b` would generate cscope.{in,po,}.out;

There are three approach to solve it:
1. modify the cscope C code;
2. modify the cscope emacs plugin lisp code;
3. modify the Makefile;

I have tried to communicate with the cscope upstream, but later I
realize the third approach is most meaningful.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Given that the init/Kconfig file uses a "menuconfig" directive for
modules already, might as well wrap all the submenu entries in an "if"
to toss all those dependencies.
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

scripts/patch-kernel script can't patch a tree, say, from 2.6.25 to
2.6.26.1, because of a wrong comparison in context of patching 2.6.x base.
 Fix it.
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

With a make O=... build kbuild would only create
the include2/asm symlink for archs that not yet
had moved headers to include/$ARCH/include

There is no longer any reason to avoid the symlink
for archs that has moved their headers so create it
unconditionally.

This fixes arm because kbuild checked for include/asm-$ARCH/errno.h
and that file was not present for arm but the platform files
are not yet moved.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Russell King <rmk@arm.linux.org.uk>

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_tx: fix missing braces in async_xor_zero_sum

This reverts commit 7cb93181, since we
did that patch twice, and the problem was already fixed earlier by
78a34ae2.
Reported-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>