提交 · 272a370900e5d2ae84662338397bb7b2375ff5cf · openeuler / raspberrypi-kernel

20 10月, 2007 7 次提交

ide: add IDE_HFLAG_RQSIZE_256 host flag · 272a3709

由 Bartlomiej Zolnierkiewicz 提交于 10月 20, 2007

Add IDE_HFLAG_RQSIZE_256 host flag to tell ide_pci_setup_ports() to set
hwif->rqsize to 256 sectors. Convert pdc202xx_old host driver to use it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

272a3709

ide: add IDE_HFLAG_FORCE_LEGACY_IRQS host flag · 8acf28c0

由 Bartlomiej Zolnierkiewicz 提交于 10月 20, 2007

Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag to tell ide_pci_setup_ports()
to always set hwif->irq to legacy IRQ 14/15 and convert generic IDE PCI
and via82cxxx host drivers to use it.

While at it:

* Add IDE_HFLAGS_UMC define (generic IDE PCI host driver).

* Remove no longer needed init_hwif_generic() (generic IDE PCI host driver).

* Set d->udma_mask instead of hwif->ultra_mask (via82cxxx host driver).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

8acf28c0

ide: add ->chipset field to ide_pci_device_t · 528a572d

由 Bartlomiej Zolnierkiewicz 提交于 10月 20, 2007

Add ->chipset field to ide_pci_device_t and use it in ide_hwif_configure()
to set hwif->chipset.  Convert cmd64x, cy82c693, rz1000 and trm290 host
drivers to use this new ability.

While at it define hwif_chipset_t as u8 to save some space in hw_regs_t,
ide_hwif_t and ide_pci_device_t instances.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

528a572d

B
serverworks: remove dead code from svwks_set_dma_mode() · b515da89
由 Bartlomiej Zolnierkiewicz 提交于 10月 20, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
b515da89

rz1000: set serialized flag only if mate interface exists · 746f312a

由 Bartlomiej Zolnierkiewicz 提交于 10月 20, 2007

Setting hwif->serialized makes sense only if the mate interface exists.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

746f312a

cmd64x: always set hwif->chipset for CMD646 · e9a0765e

由 Bartlomiej Zolnierkiewicz 提交于 10月 20, 2007

hwif->chipset should be set to ide_cmd646 also when DMA base is invalid.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

e9a0765e

ide/pci/sis5513.c: add missing "else" · 3dfd6433

由 Adrian Bunk 提交于 10月 20, 2007

This patch adds a missing "else" that was missing in
commit c77a89cd.

Spotted by the Coverity checker.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>,
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

3dfd6433

19 10月, 2007 33 次提交

ide: set drive->autotune in ide_pci_setup_ports() · 85ad93ad

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Majority of host drivers using IDE PCI layer set drive->autotune, the only
exceptions are:

generic.c
ns87415.c
rz1000.c
trm290.c
* no ->set_pio_mode method

it821x.c:
* if memory allocation fails drive->autotune won't be set
  (but there also won't be ->set_pio_mode method in such case)

piix.c:
* MPIIX controller (no ->init_hwif method so also no ->set_pio_mode method)

However if there is no ->set_pio_mode method there are no changes in behavior
w.r.t. PIO tuning so always set drive->autotune in ide_pci_setup_ports().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

85ad93ad

B
triflex: always tune PIO · d7c526f7
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
d7c526f7
B
opti621: always tune PIO · 912fb29a
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
912fb29a
B
cy82c693: always tune PIO · af1b3d5c
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
af1b3d5c

cs5520: always tune PIO · f0bb945c

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Since cs5520 uses VDMA best PIO mode was tuned anyway by ide_dma_check()
but only if DMA was successfully initialized.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

f0bb945c

B
alim15x3: always tune PIO · 93c68079
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
93c68079

ide: add IDE_HFLAG_LEGACY_IRQS host flag · 3985ee3b

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_LEGACY_IRQS host flag to tell ide_pci_setup_ports() to set
hwif->irq to legacy IRQ 14/15 (iff hwif->irq is not already set) and convert
atiixp, piix, serverworks, sis5513 and slc90e66 host drivers to use it.

While at it:

* In piix.c add IDE_HFLAGS_PIIX define and don't use ->init_hwif for MPIIX.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

3985ee3b

ide: add IDE_HFLAG_SERIALIZE host flag · 1c51361a

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_SERIALIZE host flag to tell ide_pci_setup_ports() to set
hwif/mate->serialized and convert aec62xx, cs5530 and sc1200 host drivers
to use it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1c51361a

ide: add IDE_HFLAG_ERROR_STOPS_FIFO host flag · ed67b923

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_ERROR_STOPS_FIFO host flag and use it instead
of hwif->err_stops_fifo.  As a side-effect this change fixes
hwif->err_stops_fifo not being restored by ide_hwif_restore().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ed67b923

piix: add DECLARE_ICH_DEV() macro · 40d2dd7e

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add DECLARE_ICH_DEV() macro.

While at it:

* Add init_hwif_ich() (->init_hwif method) for ICH controllers.

* Rename init_chipset_piix() to init_chipset_ich() and use it only for
  ICH controllers.

* Remove no longer needed piix_is_ichx() helper.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

40d2dd7e

B
pdc202xx_old: add DECLARE_PDC2026X_DEV() macro · 5ef8cb5d
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
5ef8cb5d
B
pdc202xx_new: add DECLARE_PDCNEW_DEV() macro · 05d7e6cb
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
05d7e6cb

aec62xx: no need to disable UDMA in ->init_hwif method for ATP850UF · 6a7f62af

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* No need to disable UDMA in ->init_hwif method for ATP850UF (and since we
  now always tune PIO it will be disabled by ->set_pio_mode calls anyway).

* Bump driver version.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

6a7f62af

serverworks: remove ->init_setup · 7ed58297

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Merge init_setup_{svwks,csb6}() into svwks_init_one().

While at it:

* Remove redundant dev->device checks.

* Operate on a local copy of serverworks_chipsets[] entry.

* Use pci_resource_start().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

7ed58297

scc_pata: remove ->init_setup · aaf707f0

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

aaf707f0

pdc202xx_old: remove ->init_setup · 97f84baa

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* Split off pdc202ata4_fixup_irq() helper from init_setup_pdc202ata4().

* Merge init_setup_{pdc202ata4,pdc20265,pdc202xx}() into pdc202xx_init_one().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

97f84baa

pdc202xx_new: remove ->init_setup · 099b1f42

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* Split off pdc20270_get_dev2() helper from init_setup_pdc20270().

* Merge init_setup_{pdcnew,pdc20270,pdc20276}() into pdc202new_init_one().

While at it:

* Change KERN_ level of interrupt fixup message from KERN_WARNING to KERN_INFO.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

099b1f42

hpt366: remove ->init_setup · fbf47840

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* Split off hpt{374,371,366}_init() helper from init_setup_hpt{374,371,366}().

* Merge init_setup_{374,372n,371,372a,302,366}() into hpt366_init_one().

While at it:

* Use "HPT36x" name for HPT366/HPT368 chipsets.

* Add .chip_name to struct hpt_info and use it to set set d->name.

* Convert .max_ultra in struct hpt_info to .udma_mask and use it to set
  d->udma_mask.

* Fix hpt302 to use HPT302_ALLOW_ATA133_6 define.

* Change HPT366/HPT374 interrupt fixup message from KERN_WARNING to KERN_INFO.

* Use the second hpt366_chipsets[] entry for HPT37x chipsets using HPT36x PCI
  device ID and fix .enablebits/.host_flags for HPT36x hpt366_chipsets[] entry.

* Bump driver version.

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

fbf47840

cmd64x: remove ->init_setup · bfd314a3

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Merge init_setup_{cmd64x,cmd646}() into cmd64x_init_one().

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

bfd314a3

aec62xx: remove ->init_setup · df95f5ab

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Merge init_setup_{aec62xx,aec6x80}() into aec62xx_init_one().

While at it:

* Use id->driver_data instead of dev->device.

* Use ATA_UDMA6 define.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

df95f5ab

ide: use I/O ops directly part (take 2) · 31e8a465

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

v2:
- bump host driver versions (as suggested by Sergei)
- use I/O ops directly in drivers/ide/setup-pci.c

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

31e8a465

ide: use pci_dev->revision · fc212bb1

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Some places were using PCI_CLASS_REVISION instead of PCI_REVISION_ID so
they were not converted by commit 44c10138.

Cc: Auke Kok <auke-jan.h.kok@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

fc212bb1

cmd64x: Use dev->revision · 1afa6554

由 Auke Kok 提交于 10月 19, 2007

Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1afa6554

amd74xx: Omit PCI_REVISION_ID read · a84f3eed

由 Auke Kok 提交于 10月 19, 2007

Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

a84f3eed

ide: add ->mwdma_mask and ->swdma_mask to ide_pci_device_t (take 2) · 5f8b6c34

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* Add ->mwdma_mask and ->swdma_mask to ide_pci_device_t.

* Set ide_hwif_t DMA masks using DMA masks from ide_pci_device_t in
  setup-pci.c::ide_pci_setup_ports() (iff DMA base is valid and ->init_hwif
  method may still override them).

* Convert IDE PCI host drivers to use ide_pci_device_t DMA masks.

While at it:

* Use ATA_{UDMA,MWDMA,SWDMA}* defines.

* hpt34x.c: add separate ide_pci_device_t instances for HPT343 and HPT345.

* serverworks.c: fix DMA masks being set before checking DMA base.

v2:
* Add missing masks to DECLARE_GENERIC_PCI_DEV() macro.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

5f8b6c34

pdc202xx_old: remove broken SWDMA support · 9adf768a

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Documentation doesn't mention SWDMA and moreover all timings used
for SWDMA modes were over-clocked when compared to ATA spec.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

9adf768a

ide: add IDE_HFLAG_NO_LBA48 and IDE_HFLAG_NO_LBA48_DMA host flags · 238e4f14

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_NO_LBA48[_DMA] host flags, use it instead of hwif->no_lba48[_dma]
and then remove no longer needed hwif->no_lba48[_dma]. As a side-effect
this change fixes hwif->no_lba48_dma not being restored by ide_hwif_restore().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

238e4f14

ide: remove ->init_setup_dma from ide_pci_device_t (take 2) · 9ffcf364

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* Make ide_pci_device_t.host_flags u32 and add IDE_HFLAG_CS5520 host flag.

* Pass ide_pci_device_t *d to setup-pci.c::ide_get_or_set_dma_base()
  and use d->name instead of hwif->cds->name.

* Set IDE_HFLAG_CS5520 host flag in cs5520 host driver and use it in
  ide_get_or_set_dma_base() to find out which PCI BAR to use, remove no longer
  needed cs5520.c::cs5520_init_setup_dma() and ide_pci_device_t.init_setup_dma.

  This fixes PCI bus-mastering not being checked for CS5510/CS5520 hosts.

v2:
* It is wrong to check simplex bits on CS5510/CS5520 as v1 did.
  (Noticed by Alan).

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

9ffcf364

ide: add IDE_HFLAG_NO_{DMA,AUTODMA} host flags · 47b68788

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_NO_{DMA,AUTODMA} host flags.  Convert all host drivers using
ide_pci_device_t to use these flags instead of d->autodma and then remove no
longer needed d->autodma.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

47b68788

ide: add IDE_HFLAG_BOOTABLE host flag · 7cab14a7

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_BOOTABLE host flag and IDE_HFLAG_OFF_BOARD define. Convert
all host drivers using ide_pci_device_t to use IDE_HFLAG_{BOOTABLE,OFF_BOARD}
instead of d->bootable and then remove no longer needed d->bootable.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

7cab14a7

ide: add IDE_HFLAG_NO_ATAPI_DMA host flag · 33c1002e

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

Add IDE_HFLAG_NO_ATAPI_DMA host flag and set it in host drivers which
don't support ATAPI DMA. Then remove no longer needed hwif->atapi_dma.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

33c1002e

ide: add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver · 1c3dd326

由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007

* Add DECLARE_GENERIC_PCI_DEV() macro to generic IDE PCI host driver
  and use it to cleanup generic_chipsets[].

* Remove dead/obsolete code while at it.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1c3dd326

B
siimage: bump driver version · af4c90f4
由 Bartlomiej Zolnierkiewicz 提交于 10月 19, 2007
```
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
```
af4c90f4