- 16 9月, 2011 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
DWMAC Management Counters (MMC) are not fully support. The minimal support added in the past allowed to only disable counters (if present) and mask their interrupts. This patch prepares the driver to support the MMC removing obsolete code. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 8月, 2011 1 次提交
-
-
由 Jiri Pirko 提交于
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 8月, 2011 1 次提交
-
-
由 Jeff Kirsher 提交于
Move the STMicroelectronics driver into driver/net/ethernet/stmicro/ and make the necessary Kconfig and Makefile changes. CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 22 7月, 2011 3 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Prior to this change, most PHY configuration parameters were passed into the STMMAC device as a separate PHY device. As well as being unusual, this made it difficult to make changes to the MAC/PHY relationship. This patch moves all the PHY parameters into the MAC configuration structure, mainly as a separate structure. This allows us to completely ignore the MDIO bus attached to a stmmac if desired, and not create the PHY bus. It also allows the stmmac driver to use a different PHY from the one it is connected to, for example a fixed PHY or bit banging PHY. Also derive the stmmac/PHY connection type (MII/RMII etc) from the mode can be passed into <platf>_configure_ethernet. STLinux kernel at git://git.stlinux.com/stm/linux-sh4-2.6.32.y.git provides several examples how to use this new infrastructure (that actually is easier to maintain and clearer). Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
The patch removes the following serie of warnings when the driver is compiled as built-in: drivers/net/stmmac/stmmac_main.c: In function stmmac_cmdline_opt: drivers/net/stmmac/stmmac_main.c:1855:12: warning: ignoring return value of kstrtoul, declared with attribute warn_unused_result [snip] Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
- kill priv->vlgrp and stmmac_vlan_rx_register (used for nothing :)) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 7月, 2011 2 次提交
-
-
由 Srinivas Kandagatla 提交于
This patch adds new field 'force_sf_dma_mode' to plat_stmmacenet_data struct to allow users to specify if they want to use force store forward eventhough tx_coe is not available in hw. without this flag stmmac driver will use cut-thru mode not use store-forward mode. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shiraz Hashim 提交于
This patch, provided by ST SPEAr developers, has fixed a problem raised on ARM CA9 where happened that the dma_transmission was enabled before the dma descriptors were properly filled. To guarantee this data memory barriers have been explicity used in the driver. Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2011 1 次提交
-
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 6月, 2011 1 次提交
-
-
由 Richard Cochran 提交于
This patch enables software (and phy device) transmit time stamping for the STMicroelectronics Ethernet driver. Compile tested only. Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@conan.davemloft.net>
-
- 23 5月, 2011 2 次提交
-
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> [ Fixed up some incorrect #include placements, and added some non-network drivers and the fib_trie.c case - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Gortmaker 提交于
After discovering that wide use of prefetch on modern CPUs could be a net loss instead of a win, net drivers which were relying on the implicit inclusion of prefetch.h via the list headers showed up in the resulting cleanup fallout. Give them an explicit include via the following $0.02 script. ========================================= #!/bin/bash MANUAL="" for i in `git grep -l 'prefetch(.*)' .` ; do grep -q '<linux/prefetch.h>' $i if [ $? = 0 ] ; then continue fi ( echo '?^#include <linux/?a' echo '#include <linux/prefetch.h>' echo . echo w echo q ) | ed -s $i > /dev/null 2>&1 if [ $? != 0 ]; then echo $i needs manual fixup MANUAL="$i $MANUAL" fi done echo ------------------- 8\<---------------------- echo vi $MANUAL ========================================= Signed-off-by: NPaul <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 5月, 2011 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Reported-by: NKarim Hamiti <karim.hamiti@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 4月, 2011 2 次提交
-
-
由 Giuseppe CAVALLARO 提交于
On some old MAC chips without COE sometime the Transmit Underflow error is issued. The driver aborted all the transmission process and initialized it from scratch. This breaks the network activity as raised by Nachiketa on a SPEAr board. The patch is to fix this rare underflow event. The driver will only clear the interrupt and the Tx DMA will go out the Suspend state as soon as the descriptor is fetched again. The driver will continue to bump-up the DMA FIFO threshold that, indeed, helped somebody to prevent this kind of error in the past as well. Reported-by: NNachiketa Prachanda <nprachanda@ncomputing.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch reviews the open function and fixes some errors when exit with an error state. It also moves the request_irq after core is initialized when interrupts are properly masked. Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Hacked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2011 1 次提交
-
-
由 Michał Mirosław 提交于
This also removes TSO as it's made fully in software --- better to leave this to networking core. If the MAC features can be detected at probe time and not at open, then stmmac_fix_features could be simplified by limiting hw_features. That's also better for users as they don't see offloads being togglable but never turned on. Redundant fallbacks for TX csum are removed as it's already handled by network core. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2011 1 次提交
-
-
由 Giuseppe Cavallaro 提交于
This patch enables it by default when the driver starts. This has been required by many people and seems to actually be useful on STB. At any rate, the WoL modes can be selected and turned-on/off by using the ethtool at run-time by users. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 12月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
The original code had a several problems: *) It had potential null dereferences of "priv" and "res". *) It released the memory region before it was aquired. *) It didn't free "ndev" after it was allocated. *) It didn't call unregister_netdev() after calling stmmac_probe(). Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2010 1 次提交
-
-
由 Tobias Klauser 提交于
IS_ERR() already implies unlikely(), so it can be omitted here. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2010 1 次提交
-
-
由 Michał Mirosław 提交于
NETIF_F_HW_CSUM is a superset of NETIF_F_IP_CSUM+NETIF_F_IPV6_CSUM, but some drivers miss the difference. Fix this and also fix UFO dependency on checksumming offload as it makes the same mistake in assumptions. Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: NJon Mason <jon.mason@exar.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2010 1 次提交
-
-
由 Vlad Lungu 提交于
To reproduce: if connman (http://connman.net/) is started, inserting the stmmac module triggers a "BUG: spinlock bad magic on CPU#0". Registering the device in stmmac_probe() sends a notification to connman which brings the interface up before the lock is initialized. Signed-off-by: NVlad Lungu <vlad.lungu@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 11月, 2010 1 次提交
-
-
由 Giuseppe Cavallaro 提交于
The commit to convert to use the dev_pm_ops struct introduces a bug. The shutdown flag is not yet used because the hibernation on memory is done by using the freeze callback. Thanks to Vlad for having reported it. Reported-by: NVlad Lungu <vlad.lungu@windriver.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 11月, 2010 3 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This patch updates the PM support using the dev_pm_ops and reviews the hibernation support. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch adds in the plat_stmmacenet_data the init and exit callbacks that can be used for invoking specific platform functions. For example, on ST targets, these call the PAD manager functions to set PIO lines and syscfg registers. The patch removes the stmmac_claim_resource only used on STM Kernels as well. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch tidies-up the stmmac_priv structure that had many fileds alredy defined in the plat_stmmacenet_data structure. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2010 1 次提交
-
-
由 avisconti 提交于
This patch enables and disables the rx and tx bits in the MAC control reg by using a single write operation. This also solves a possible problem (spotted on SPEAr platforms) at 10Mbps where two consecutive writes to a MAC control register can take more than 4 phy_clk cycles. Signed-off-by: NArmando Visconti <armando.visconti@st.com> Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2010 1 次提交
-
-
由 Giuseppe Cavallaro 提交于
If the PM support is available this is passed through the platform instead to be hard-coded in the core files. WoL on Magic Frame can be enabled by using the ethtool support. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2010 2 次提交
-
-
由 Giuseppe CAVALLARO 提交于
The first version of the driver had hard-coded the logic for handling the checksum offloading. This was designed according to the chips included in the STM platforms where: o MAC10/100 supports no COE at all. o GMAC fully supports RX/TX COE. This is not good for other chip configurations where, for example, the mac10/100 supports the tx csum in HW or when the GMAC has no IPC. Thanks to Johannes Stezenbach; he provided me a first draft of this patch that only reviewed the IPC for the GMAC devices. This patch also helps on SPEAr platforms where the MAC10/100 can perform the TX csum in HW. Thanks to Deepak SIKRI for his support on this. In the end, GMAC devices for STM platforms have a bugged Jumbo frame support that needs to have the Tx COE disabled for oversized frames (due to limited buffer sizes). This information is also passed through the driver's platform structure. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NJohannes Stezenbach <js@sig21.net> Signed-off-by: NDeepak SIKRI <deepak.sikri@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
This patch adds the CSR Clock range selection. Original patch from Johannes Stezenbach fixed the CSR in the stmmac_mdio. We agreed to provide this through the platform instead of. Also thanks to Johannes for having tested it on ARM. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NJohannes Stezenbach <js@sig21.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 9月, 2010 1 次提交
-
-
由 Giuseppe Cavallaro 提交于
We cannot use spinlock when kmalloc is invoked with GFP_KERNEL flag because it can sleep. So this patch reviews the usage of spinlock within the stmmac_resume function avoing this bug. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Reported-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2010 1 次提交
-
-
由 Eric Dumazet 提交于
fresh skbs have ip_summed set to CHECKSUM_NONE (0) We can avoid setting again skb->ip_summed to CHECKSUM_NONE in drivers. Introduce skb_checksum_none_assert() helper so that we keep this assertion documented in driver sources. Change most occurrences of : skb->ip_summed = CHECKSUM_NONE; by : skb_checksum_none_assert(skb); Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2010 1 次提交
-
-
由 David S. Miller 提交于
In file included from drivers/net/stmmac/stmmac_ethtool.c:30: drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe': drivers/net/stmmac/stmmac_main.c:1744: warning: cast from pointer to integer of different size In file included from drivers/net/stmmac/stmmac_mdio.c:31: drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want drivers/net/stmmac/dwmac1000_core.c: In function 'dwmac1000_dump_regs': drivers/net/stmmac/dwmac1000_core.c:56: warning: cast from pointer to integer of different size Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 8月, 2010 2 次提交
-
-
由 Giuseppe CAVALLARO 提交于
This avoids unnecessary casting and adds the ioaddr in the private structure. This patch also removes many warning when compile the driver. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pawel Moll 提交于
This patch modifies the stmmac_adjust_link() function so the fix_mac_speed() is called not only when link speed is changing between 10 and 100 Mbps (as required in RMII mode) but also for 1000 Mbps. Signed-off-by: NPawel Moll <pawel.moll@st.com> Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2010 2 次提交
-
-
由 Giuseppe CAVALLARO 提交于
For Simple Ethernet frames (802.2 and 802.3) the GMAC Core never strips pad and fcs. This means the ACS has no effect on IPv4/6 frames. The FL bits, in the RDES0, include the FCS so the driver has to remove it in SW. For 802.3 frame format with LLC or LLC-SNAP, when set the ACS bit, the HW strips both PAD and FCS. The FL bits, in the RDES0, actually represents the frame length already stripped. This patch fixes this logic within the device driver that erroneously removed 4byte from 802.3 frames already stripped corrupting the payload. Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Giuseppe CAVALLARO 提交于
The driver erroneously sets the tmrate to zero when the TMU initialisation fails. This actually generates problems while using the dual GMAC configuration. With this patch, enabling both the dual gmac and the timer optimisation, the first interface opened will use the tmu channel 2, the second one won't be able to use the timer but will continue to work without mitigating the interrupts by using the external timer (i.e. TMU channel 2). Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 7月, 2010 1 次提交
-
-
由 Dan Carpenter 提交于
If the allocations fail in either dwmac1000_setup() or dwmac100_setup() then return NULL. These are called from stmmac_mac_device_setup(). The check for NULL returns in stmmac_mac_device_setup() needed to be moved forward a couple lines. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 7月, 2010 1 次提交
-
-
由 Richard Cochran 提交于
The phy_mii_ioctl() function unnecessarily throws away the original ifreq. We need access to the ifreq in order to support PHYs that can perform hardware time stamping. Two maverick drivers filter the ioctl commands passed to phy_mii_ioctl(). This is unnecessary since phylib will check the command in any case. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2010 1 次提交
-
-
由 Joe Perches 提交于
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2010 1 次提交
-
-
由 Giuseppe CAVALLARO 提交于
Output for chip that uses the Enhanced descriptors: [snip] STMMAC driver: platform registration... done! DWMAC1000 - user ID: 0x10, Synopsys ID: 0x33 Enhanced descriptor structure no valid MAC address;please, use ifconfig or nwhwconfig! eth0 - (dev. name: stmmaceth - id: 0, IRQ #134 IO base addr: 0xfd110000) STMMAC MII Bus: probed [snip] Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-