- 22 8月, 2017 10 次提交
-
-
由 Ilia Mirkin 提交于
Forked from GP107 implementation. Secboot/gr left out as we don't have signed blobs from NVIDIA in linux-firmware. (Ben): Was unable to mmiotrace the binary driver for unknown reasons, so not able to 100% confirm that no other changes from GP107 are needed. Quick testing shows it seems to work well enough for display. Due to NVIDIA dragging their heels on getting signed firmware to us, this is the best we can do for now. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Rosen Penev 提交于
Most of these errors seem to be WFD related. Official documentation says dcb type 8 is reserved. It's probably used for WFD. Silence the warning in either case. Connector type 70 is stated to be a virtual connector for WiFi display. Since we know this, don't warn that we don't. Signed-off by: Rosen Penev <rosenp@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Rosen Penev 提交于
This warning seems to pop up mainly in laptop cards. Silence it as it is expected behavior. Signed-off by: Rosen Penev <rosenp@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
GT215, GF100-GP100, and GP10x are all different. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
The NV_PMC_ENABLE bit for PMU did not appear until GF100, and some other unknown register needs to be poked instead. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
An upcoming commit will replace direct NV_PMC register bashing from PMU with a call to the proper function. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ilia Mirkin 提交于
We assume that each board has 4 heads for GF119+. However this is not necessarily true - in the case of a GP108 board, the register indicated that there were only 2. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Karol Herbst 提交于
This allows temperature readouts on maxwell2 GPUs. Signed-off-by: NKarol Herbst <karolherbst@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Colin Ian King 提交于
Array thresolds should be named thresholds, rename it. Also make it static static const char * const Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NMartin Peres <martin.peres@free.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 18 8月, 2017 1 次提交
-
-
由 Christian König 提交于
Provide the drm printer directly instead of just the callback. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 8月, 2017 1 次提交
-
-
由 Maarten Lankhorst 提交于
The most recent merge commit in airlied/drm-next has problems with confusing old_crtc_state and new_crtc_state. Use the for_each_oldnew_crtc_in_state macros to clean up the confusion, and explicitly look at the correct state instead of looking at asyh->state. With these fixes it becomes more obvious what the code is trying to do, which will hopefully prevent future confusion. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 10 8月, 2017 1 次提交
-
-
由 Ben Skeggs 提交于
Fixes hitting WARN_ON() during initialisation of pre-NV50 GPUs, caused by the recent changes to support pad macro routing on GM20x. We currently don't use them here for older GPUs anyway. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 08 8月, 2017 4 次提交
-
-
由 Daniel Vetter 提交于
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.chAcked-by: NNeil Armstrong <narmstrong@baylibre.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Acked-by: NArchit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NShawn Guo <shawnguo@kernel.org> Acked-by: NShawn Guo <shawnguo@kernel.org> Acked-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NVincent Abriou <vincent.abriou@st.com>
-
由 Daniel Vetter 提交于
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_helper_connector_set_property. The only special case is nouveau which used one function for both pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2 vtables. But amounts to exactly the same. What is rather strange here is how few drivers set this up, I suspect the earlier patch to handle properties in the core did end up fixing a pile of possible issues. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.chAcked-by: NVincent Abriou <vincent.abriou@st.com>
-
由 Daniel Vetter 提交于
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_plane_set_property. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-6-daniel.vetter@ffwll.chReviewed-by: NArchit Taneja <architt@codeaurora.org> Acked-by: NPhilippe Cornu <philippe.cornu@st.com> Tested-by: NPhilippe Cornu <philippe.cornu@st.com> Acked-by: NLiviu Dudau <Liviu.Dudau@arm.com> Acked-by: NVincent Abriou <vincent.abriou@st.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Daniel Vetter 提交于
It's dead code because this is now handled in the core. Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Eric Engestrom <eric@engestrom.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-5-daniel.vetter@ffwll.chReviewed-by: NArchit Taneja <architt@codeaurora.org> Acked-by: NPhilippe Cornu <philippe.cornu@st.com> Tested-by: NPhilippe Cornu <philippe.cornu@st.com> Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: NThomas Hellstrom <thellstrom@vmware.com>
-
- 04 8月, 2017 1 次提交
-
-
由 Peter Rosin 提交于
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NPeter Rosin <peda@axentia.se> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-12-peda@axentia.se
-
- 02 8月, 2017 1 次提交
-
-
由 Ben Widawsky 提交于
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by: NBen Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: NDaniel Stone <daniels@collabora.com>
-
- 01 8月, 2017 1 次提交
-
-
由 Maarten Lankhorst 提交于
Use the new atomic iterator macros, the old ones are about to be removed. With the new macros, it's more easy to get old and new state so get them from the macros instead of from obj->state. Changes since v1: - Don't mix up old and new state. (danvet) - Rebase on top of interruptible swap_state changes. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20170719143920.25685-7-maarten.lankhorst@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 29 7月, 2017 1 次提交
-
-
由 Noralf Trønnes 提交于
drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default, so no need to set it. Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: NNoralf Trønnes <noralf@tronnes.org> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-33-git-send-email-noralf@tronnes.org
-
- 26 7月, 2017 2 次提交
-
-
由 Maarten Lankhorst 提交于
drm_atomic_helper_swap_state() will be changed to interruptible waiting in the next few commits, so all drivers have to be changed to handling failure. Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-4-maarten.lankhorst@linux.intel.comReviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Maarten Lankhorst 提交于
Make it more clear that post commit return ret is really return 0, and add a missing drm_atomic_helper_cleanup_planes when drm_atomic_helper_wait_for_fences fails. Fixes: 839ca903 ("drm/nouveau/kms/nv50: transition to atomic interfaces internally") Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170711143314.2148-2-maarten.lankhorst@linux.intel.comReviewed-by: NSean Paul <seanpaul@chromium.org> [mlankhorst: Use if (ret) to remove the goto in success case.] Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 25 7月, 2017 2 次提交
-
-
由 Ben Skeggs 提交于
Bit 30 being set causes the upper half of BAR2 to stay in physical mode, mapped over the end of VRAM, even when the rest of the BAR has been set to virtual mode. We inherited our initial value from RM, but I'm not aware of any reason we need to keep it that way. This fixes severe GPU hang/lockup issues revealed by Wayland on F26. Shout-out to NVIDIA for the quick response with the potential cause! Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org # 4.3+
-
由 Ilia Mirkin 提交于
GP102's cursors go from chan 17..20. Increase the array size to hold their data properly. Fixes: e50fcff1 ("drm/nouveau/disp/gp102: fix cursor/overlay immediate channel indices") Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 24 7月, 2017 4 次提交
-
-
由 Ben Skeggs 提交于
These on()/off() calls should be done as a result of modesetting actions, and as we shut down all heads already on unload/suspend, it's pointless to call off() again. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
We don't support them on G80, but we need to add them to the mapping to avoid triggering a WARN_ON() on GPUs where the ports are present. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Since switching the I2C-over-AUX helpers, there have been regressions on some display combinations due to us not having support for "address only" transactions. This commits enables support for them for GF119 and newer. Earlier GPUs have been reverted to a custom I2C-over-AUX algorithm. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 15 7月, 2017 1 次提交
-
-
由 Shashank Sharma 提交于
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com> Signed-off-by: NShashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.comSigned-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
-
- 26 6月, 2017 1 次提交
-
-
由 Daniel Vetter 提交于
nouveau_display_vblank_fini is called in the load error path (where it doesn't matter) and module unload (where vblanks have been shut down correctly already through drm_vblank_off), we can drop it. Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Reviewed-by: NSean Paul <seanpaul@chromium.org> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170621082850.13224-8-daniel.vetter@ffwll.ch
-
- 20 6月, 2017 3 次提交
-
-
由 Daniel Vetter 提交于
The magic switching between proper pci driver and shadow-attach isn't useful anymore since there's no ums+kms drivers left. Let's split this up properly, calling pci_register_driver for kms drivers and renaming the shadow-attach init to drm_legacy_pci_init/exit. Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
The only special-case is pci devices, and we can easily handle this in the core. Do so and drop a pile of boilerplate from drivers. Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-5-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
We use drm_crtc_ for all the new-style vblank functions which directly take a struct drm_crtc *. drm_accurate_vblank_count was the odd one out, correct this to appease my OCD. Acked-by: NThierry Reding <treding@nvidia.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-13-daniel.vetter@ffwll.ch
-
- 17 6月, 2017 1 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 16 6月, 2017 5 次提交
-
-
由 Arnd Bergmann 提交于
There is a prototype for this function in the header, but the function itself lacks a 'void' in the argument list, causing a harmless warning when building with 'make W=1': drivers/gpu/drm/nouveau/nouveau_drm.c: In function 'nouveau_pmops_runtime': drivers/gpu/drm/nouveau/nouveau_drm.c:730:1: error: old-style function definition [-Werror=old-style-definition] Fixes: 321f5c5f ("drm/nouveau: replace multiple open-coded runpm support checks with function") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Mikko Perttunen 提交于
As with vga_init, this function doesn't make sense on non-PCI devices, and the Thunderbolt check in it dereferences a NULL pointer in that case. Add some code to skip this function when the device is not a PCI device. Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Mikko Perttunen 提交于
On Tegra186 systems with certain firmware revisions, leaving the GPU in reset can cause a hang. To prevent this, don't leave the GPU in reset. Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Mikko Perttunen 提交于
On Tegra186, powergating is handled by the BPMP power domain provider and the "legacy" powergating API is not available. Therefore skip these calls if we are attached to a power domain. Signed-off-by: NMikko Perttunen <mperttunen@nvidia.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Oscar Salvador 提交于
This patch replaces the symbolic permissions with the numeric ones. Signed-off-by: NOscar Salvador <osalvador.vilardaga@gmail.com> Reviewed-by: NMartin Peres <martin.peres@free.fr> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-