- 28 12月, 2005 3 次提交
-
-
由 Dmitry Torokhov 提交于
Do not use platform_device_register_simple() as it is going away, implement ->probe() and ->remove() functions so manual binding and unbinding will work with this driver. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Do not use platform_device_register_simple() as it is going away, implement ->probe() and ->remove() functions so manual binding and unbinding will work with this driver. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Do not use platform_device_register_simple() as it is going away, implement ->probe() and ->remove() functions so manual binding and unbinding will work with this driver. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 12月, 2005 14 次提交
-
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Daniele Gozzi 提交于
This DMI data was found in Fujitsu LifeBook B142 (Product S/N FPC01003B, italian keyboard); re: bugzilla #5335 Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Add yet another entry to the ever-growing list of boxes with non-working MUX implementation. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
It looks like quite a few mice out there treat PSMOUSE_RESET_DIS as a powerdown request and turn off the light rendering the mouse unusable. Vojtech recommended to switch from PSMOUSE_RESET_DIS to full reset, however we don't want to do that everywhere as full reset is pretty slow. Instead we only use it before probing for "generic" protocols, such as IntelliMouse and Explorer, to make sure that the mouse will be woken up if it went to sleep as a result of PSMOUSE_RESET_DIS issued earlier. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Larry Finger 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Michael Hanselmann 提交于
This patch adds support for the Geyser 2 touchpads used on post Oct 2005 Apple PowerBooks to the appletouch driver. Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch> Acked-by: NRene Nussbaumer <linux-kernel@killerfox.forkbomb.ch> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Acked-by: NStelian Pop <stelian@popies.net> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Knut Petersen 提交于
Whenever ywrap scrolling is selected together with 180 degree screen rotation, 2.6.15-rc6 and earlier versions are broken. fb_pan_display() expects non-negative yoffsets, but ud_update_start() calls it with yoffsets down to -(yres - font height). This patch transforms yoffset to the correct range 0 ... vyres-1. Some obviously unneeded parentheses are removed, too. Verified with cyblafb, should be applied before 2.6.15-final because it does fix the framebuffer rotation code introduced early in the 2.6.15 release cycle. Signed-off-by: NKnut Petersen <Knut_Petersen@t-online.de> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Reported by: janis huang (Bugzilla Bug 5747) Fix on oops in intelfb. Not sure what's happening, looks like dinfo->name pointer is invalidated after initialization. Remove intelfb_get_fix, it's not needed and move the majority of the code to the initialization routine. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Antonino A. Daplas 提交于
Fix intelfb trying to free a non-existent resource in its error path. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
The g5 thermal control for liquid cooled machines has a small bug, when the temperatures gets too high, it boosts all fans to the max, but incorrectly sets the liquids pump to the min instead of the max speed, thus causing the overtemp condition not to clear and the machine to shut down after a while. This fixes it to set the pumps to max speed instead. This problem might explain some of the reports of random shutdowns that some g5 users have been reporting in the past. Many thanks to Marcus Rothe for spending a lot of time trying various patches & sending log logs before I found out that typo. Note that overtemp handling is still not perfect and the machine might still shutdown, that patch should reduce if not eliminate such occcurences in "normal" conditions with high load. I'll implement a better handling with proper slowing down of the CPUs later. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 20 12月, 2005 6 次提交
-
-
由 Neil Brown 提交于
I had thought that keeping the reported tail level clearly different from the module name was a good idea, but I've changed my mind. 'raid5' is better and probably less confusing than 'RAID-5'. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Chan 提交于
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test. Overwriting memory in this region can cause ASF problems. Update version and release date. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The tw32_f() function (register write with immediate read flush) can hang when used on some registers to switch clock frequencies and power. A new tw32_wait_f() is added for such registers with the delay before the read and after the read. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Add some missing workarounds in tg3_set_power_state(): 1. Workaround to prevent overdrawing current on 5714. 2. Do not power down 5700's PHY because of hw limitation. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Locate the pdev_peer for dual port 5714 NIC devices in addition to 5704 devices. The name is also changed to tg3_find_peer() from tg3_find_5704_peer(). It is also necessary to call netdev_priv() to get to the peer's private tg3 structure. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
On sparc and sparc64, the rtc driver doesn't compile with PCI support disabled. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2005 12 次提交
-
-
由 Mauro Carvalho Chehab 提交于
- Fix a broken logic that didn't cover all standards. - Fix compilation failure with gcc 2.95.3. Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Oliver Endriss 提交于
- Enable SPDIF output for DVB-S rev 2.3. Firmware 2623 or higher required. Signed-off-by: NOliver Endriss <o.endriss@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Ricardo Cerqueira 提交于
- Tuner 100 is the TUNER_PHILIPS_FMD1216ME_MK3, not TUNER_ABSENT. This was causing the tuner module to be skipped, and rendered boards with this value in the eeprom (like the HVR1100) unable to tune Signed-off-by: NRicardo Cerqueira <v4l@cerqueira.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Jean Delvare 提交于
- Fix compilation failure with gcc 2.95.3. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
-
由 Kyungmin Park 提交于
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyungmin Park 提交于
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kyungmin Park 提交于
-
由 Kyungmin Park 提交于
This (and the three subsequent patches) is working well on OMAP H4 with 2.6.15-rc4 kernel and passes the LTP fs test. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jean Delvare 提交于
Fix a typo which breaks radeon drm compilation with gcc 2.95.3. The offending line was added back in 2.6.11-rc3, but was harmless back then. A recent addition nearby changed it into a compilation breaker: commit 281ab031. The doubled semi-colon ends up being an empty instruction, and the variable declaration thus ends up being in the middle of "code". Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
This patch fixes an OOPS in HID driver when connecting simulation devices generating unknown simulation events. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Acked-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Salyzyn, Mark 提交于
Miquel van Smoorenburg <miquels@cistron.nl> forwarded me this fix to resolve a deadlock condition that occurs due to the API change in 2.6.13+ kernels dropping the host locking when entering the error handling. They all end up calling adpt_i2o_post_wait(), which if you call it unlocked, might return with host_lock locked anyway and that causes a deadlock. Signed-off-by: NMark Salyzyn <aacraid@adaptec.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ben Collins 提交于
When dpt_i2o is loaded first, i2o being loaded would cause it to call pci_device_disable, thus breaking dpt_i2o's use of the device. Based on similar usage of pci_disable_device in other drivers. Signed-off-by: NBen Collins <bcollins@ubuntu.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 12月, 2005 4 次提交
-
-
由 Al Viro 提交于
booke_wdt.c had been missed in cpu_specs[] removal sweep Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alan Stern 提交于
This patch (as617) adds a couple of memory barriers that Ben H. forgot in his recent suspend/resume fix. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Milton Miller 提交于
PCI express hotplug uses the pcieportbus driver so pcie must be initialized before hotplug/. This patch changes the link order. Signed-Off-By: NMilton Miller <miltonm@bga.com> Acked-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark A. Greer 提交于
The busses/i2c-mv64xxx.c driver doesn't currently compile because of an incorrect argument to dev_err(). This patch fixes that. Signed-off-by: NMark A. Greer <mgreer@mvista.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 12月, 2005 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
This finally fixes the radeon memory mapping bug that was incorrectly fixed by the previous patch. This time, we use the actual vram size as the size to calculate how far to move the AGP aperture from the framebuffer in card's memory space. If there are still issues with this patch, they are due to bugs in the X driver that I'm working on fixing too. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-