If we had to fall back to read/write through MDS, then assume that we should
retry pNFS after a suitable timeout period.
The following patch sets a timeout of 2 minutes.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and make them local to the pnfs.c file.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we do return errors from nfs4_proc_layoutget() and that we
don't mark the layout as having failed if the error was due to a
signal or resource problem on the client side.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

since the only user of nfs4_proc_layoutget is send_layoutget, which
ignores its return value, there is no reason to return any value.
Signed-off-by: NIdan Kedar <idank@tonian.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

we have encountered a bug whereby reading a lot of files (copying
fedora's /bin) from a pNFS mount and hitting Ctrl+C in the middle caused
a general protection fault in xdr_shrink_bufhead. this function is
called when decoding the response from LAYOUTGET. the decoding is done
by a worker thread, and the caller of LAYOUTGET waits for the worker
thread to complete.

hitting Ctrl+C caused the synchronous wait to end and the next thing the
caller does is to free the pages, so when the worker thread calls
xdr_shrink_bufhead, the pages are gone. therefore, the cleanup of these
pages has been moved to nfs4_layoutget_release.
Signed-off-by: NIdan Kedar <idank@tonian.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When the file layout driver is fencing a DS, _pnfs_return_layout can be
called mulitple times per inode due to in-flight i/o referencing lsegs on it's
plh_segs list.

Remember that LAYOUTRETURN has been called, and do not call it again.
Allow LAYOUTRETURNs after a subsequent LAYOUTGET.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The "invalid layout" class of errors is handled by destroying the layout and
getting a new layout from the server.  Currently, the layout must be
destroyed before a new layout can be obtained.

This means that all references (e.g.lsegs) to the "to be destroyed" layout
header must be dropped before it can be destroyed. This in turn means waiting
for all in flight RPC's using the old layout as well as draining the data
server session slot table wait queue.

Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for
the old layout to be destroyed.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This prevents the use of any layout for i/o that references the deviceid.
I/O is redirected through the MDS.

Redirect the unhandled failed I/O to the MDS without marking either the
layout or the deviceid invalid.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This is only when CONFIG_NFS_V4_1 isn't enabled.
Signed-off-by: NBryan Schumaker <bjschuma@netapp.com>
Acked-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This also has the advantage that it allows directio to use pnfs.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

It is COMMIT that is handled the most differently between
the paged and direct paths.  Create a structure that encapsulates
everything either path needs to know about the commit state.

We could use void to hide some of the layout driver stuff, but
Trond suggests pulling it out to ensure type checking, given the
huge changes being made, and the fact that it doesn't interfere
with other drivers.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Factors out the code that will need to change when directio
starts using these code paths.  This will allow directio to use
the generic pagein and flush routines
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ensure that we conditionally drop the inode->i_lock when it is safe
to do so in the commit loops.
We do so after locking the nfs_page, but before removing it from the
commit list. We can then use list_safe_reset_next to recover the loop
after the lock is retaken.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move more pnfs-isms out of the generic commit code.

Bugfixes:

- filelayout_scan_commit_lists doesn't need to get/put the lseg.
  In fact since it is run under the inode->i_lock, the lseg_put()
  can deadlock.

- Ensure that we distinguish between what needs to be done for
  commit-to-data server and what needs to be done for commit-to-MDS
  using the new flag PG_COMMIT_TO_DS. Otherwise we may end up calling
  put_lseg() on a bucket for a struct nfs_page that got written
  through the MDS.

- Fix a case where we were using list_del() on an nfs_page->wb_list
  instead of list_del_init().

- filelayout_initiate_commit needs to call filelayout_commit_release
  on error instead of the mds_ops->rpc_release(). Otherwise it won't
  clear the commit lock.

Cleanups:

- Let the files layout manage the commit lists for the pNFS case.
  Don't expose stuff like pnfs_choose_commit_list, and the fact
  that the commit buckets hold references to the layout segment
  in common code.

- Cast out the put_lseg() calls for the struct nfs_read/write_data->lseg
  into the pNFS layer from whence they came.

- Let the pNFS layer manage the NFS_INO_PNFS_COMMIT bit.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Cc: Fred Isaman <iisaman@netapp.com>

The radix tree is only being used to compile lists of reqs needing commit.
It is simpler to just put the reqs directly into a list.
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

As mandated by the standard. In case of an IO error, a pNFS
objects layout driver must return it's layout. This is because
all device errors are reported to the server as part of the
layout return buffer.

This is implemented the same way PNFS_LAYOUTRET_ON_SETATTR
is done, through a bit flag on the pnfs_layoutdriver_type->flags
member. The flag is set by the layout driver that wants a
layout_return preformed at pnfs_ld_{write,read}_done in case
of an error.
(Though I have not defined a wrapper like pnfs_ld_layoutret_on_setattr
 because this code is never called outside of pnfs.c and pnfs IO
 paths)

Without this patch 3.[0-2] Kernels leak memory and have an annoying
WARN_ON after every IO error utilizing the pnfs-obj driver.

[This patch is for 3.2 Kernel. 3.1/0 Kernels need a different patch]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

file layout and block layout both use it to set mark layout io failure
bit. So make it generic.
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Cc: stable@kernel.org [3.0]
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix two recently introduced compile problems:

Fix a typo in fs/nfs/pnfs.h

Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in
struct nfs_server.
Reported-by: NJens Axboe <jaxboe@fusionio.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Call GETDEVICELIST during mount, then call and parse GETDEVICEINFO
for each device returned.

[pnfsblock: get rid of deprecated xdr macros]
Signed-off-by: NJim Rees <rees@umich.edu>
[pnfsblock: fix pnfs_deviceid references]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
[pnfsblock: fix print format warnings for sector_t and size_t]
[pnfs-block: #include <linux/vmalloc.h>]
[pnfsblock: no PNFS_NFS_SERVER]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
[pnfsblock: fix bug determining size of striped volume]
[pnfsblock: fix oops when using multiple devices]
Signed-off-by: NFred Isaman <iisaman@citi.umich.edu>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[pnfsblock: get rid of vmap and deviceid->area structure]
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This gives layout driver a chance to cleanup structures they put in at
encode_layoutcommit.
Signed-off-by: NAndy Adamson <andros@netapp.com>
[fixup layout header pointer for layoutcommit]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
[rm inode and pnfs_layout_hdr args from cleanup_layoutcommit()]
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

To allow layout driver to issue getdevicelist at mount time, and clean up
at umount time.

[fixup non NFS_V4_1 set_pnfs_layoutdriver definition]
[pnfs: pass mntfh down the init_pnfs path]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The block driver uses GETDEVICELIST
Signed-off-by: NAndy Adamson <andros@netapp.com>
[pass struct nfs_server * to getdevicelist]
[get machince creds for getdevicelist]
[fix getdevicelist decode sizing]
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@tonian.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

There can be multiple lseg per file, so layoutcommit should be
able to handle it.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No need to save it for every lseg.
No need to save it at every pnfs_set_layoutcommit.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

No need to save it for every lseg.

[Needed in v3.0]
CC: Stable Tree <stable@kernel.org>
Signed-off-by: NPeng Tao <peng_tao@emc.com>
Signed-off-by: NJim Rees <rees@umich.edu>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we recoalese to take into account differences in
differences in block sizes when falling back to write through the MDS.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

...and ensure that we recoalese to take into account differences in
block sizes when falling back to read through the MDS.
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Mark all deviceids established under an expired MDS clientid as invalid.
Stop all new i/o through DS and send through the MDS.
Don't use any new LAYOUTGETs that use the invalid deviceid. Purge all layouts
established under the expired MDS clientid.
Remove the MDS clientid deviceid and data servers reference
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Ask for whole file layouts. Until support for layout segments is fully
supported in the file layout code, discard non-whole file layouts.
Signed-off-by: NAndy Adamson <andros@netapp.com>
Signed-off-by: NFred Isaman <iisaman@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>