- 26 9月, 2014 15 次提交
-
-
由 Peter Foley 提交于
glibc versions older than 2.16 don't include sys/auxv.h which this executable uses. Since we don't have a good way to test for specific glibc versions in kbuild, just disable it for now. Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
Add some missing files to .gitignore. Push Documentation/.gitignore down into subdirectories. Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
glibc 2.9 introduced the htole<16/32/64> macros, add them to tools/include to support older versions of glibc. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mark Brown 提交于
Currently arm64 does not support PCI but it does support v4l2. Since the PCI skeleton driver is built unconditionally as a module with no dependency on PCI this causes build failures for arm64 allmodconfig. Fix this by defining a symbol VIDEO_PCI_SKELETON for the skeleton and conditionalising the build on that. Signed-off-by: NMark Brown <broonie@linaro.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [added VIDEO dependencies] Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
Fix a few warnings that gcc emits during a default build. Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
Add a bunch of previously unbuilt source files to the Documentation build machinery. Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Foley 提交于
Change the Documentation makefiles from obj-m to subdir-y to avoid generating unnecessary built-in.o files since nothing in Documentation/ is ever linked in to vmlinux. Signed-off-by: NPeter Foley <pefoley2@pefoley.com> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI hotplug, cpufreq, hibernation, ACPI LPSS driver), fixes for stuff that never worked correctly (ACPI GPIO support in some cases and a wrong sign of an error code in the ACPI core in one place), and one blacklist item for ACPI backlight handling. Specifics: - Revert of a recent hibernation core commit that introduced a NULL pointer dereference during resume for at least one user (Rafael J Wysocki). - Fix for the ACPI LPSS (Low-Power Subsystem) driver to disable asynchronous PM callback execution for LPSS devices during system suspend/resume (introduced in 3.16) which turns out to break ordering expectations on some systems. From Fu Zhonghui. - cpufreq core fix related to the handling of sysfs nodes during system suspend/resume that has been broken for intel_pstate since 3.15 from Lan Tianyu. - Restore the generation of "online" uevents for ACPI container devices that was removed in 3.14, but some user space utilities turn out to need them (Rafael J Wysocki). - The cpufreq core fails to release a lock in an error code path after changes made in 3.14. Fix from Prarit Bhargava. - ACPICA and ACPI/GPIO fixes to make the handling of ACPI GPIO operation regions (which means AML using GPIOs) work correctly in all cases from Bob Moore and Srinivas Pandruvada. - Fix for a wrong sign of the ACPI core's create_modalias() return value in case of an error from Mika Westerberg. - ACPI backlight blacklist entry for ThinkPad X201s from Aaron Lu" * tag 'pm+acpi-3.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()" gpio / ACPI: Use pin index and bit length ACPICA: Update to GPIO region handler interface. ACPI / platform / LPSS: disable async suspend/resume of LPSS devices cpufreq: release policy->rwsem on error cpufreq: fix cpufreq suspend/resume for intel_pstate ACPI / scan: Correct error return value of create_modalias() ACPI / video: disable native backlight for ThinkPad X201s ACPI / hotplug: Generate online uevents for ACPI containers
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "This is probably not the kind of pull request you want to see that late in the cycle. Yet, the ACPI refactorization was problematic again and caused another two issues which need fixing. My holidays with limited internet (plus travelling) and the developer's illness didn't help either :( The details: - ACPI code was refactored out into a seperate file and as a side-effect, the i2c-core module got renamed. Jean Delvare rightfully complained about the rename being problematic for distributions. So, Mika and I thought the least problematic way to deal with it is to move all the code back into the main i2c core source file. This is mainly a huge code move with some #ifdeffery applied. No functional code changes. Our personal tests and the testbots did not find problems. (I was thinking about reverting, too, yet that would also have ~800 lines changed) - The new ACPI code also had a NULL pointer exception, thanks to Peter for finding and fixing it. - Mikko fixed a locking problem by decoupling clock_prepare and clock_enable. - Addy learnt that the datasheet was wrong and reimplemented the frequency setup according to the new algorithm. - Fan fixed an off-by-one error when copying data - Janusz fixed a copy'n'paste bug which gave a wrong error message - Sergei made sure that "don't touch" bits are not accessed" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: acpi: Fix NULL Pointer dereference i2c: move acpi code back into the core i2c: rk3x: fix divisor calculation for SCL frequency i2c: mxs: fix error message in pio transfer i2c: ismt: use correct length when copy buffer i2c: rcar: fix RCAR_IRQ_ACK_{RECV|SEND} i2c: tegra: Move clk_prepare/clk_set_rate to probe
-
由 Randy Dunlap 提交于
Transfer Documentation maintainership to Jiri Kosina. Thanks, Jiri. I'll still be reviewing and working on documentation. Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Acked-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
* pm-cpufreq: cpufreq: release policy->rwsem on error cpufreq: fix cpufreq suspend/resume for intel_pstate * pm-sleep: Revert "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()"
-
由 Rafael J. Wysocki 提交于
* acpi-hotplug: ACPI / hotplug: Generate online uevents for ACPI containers * acpi-scan: ACPI / scan: Correct error return value of create_modalias() * acpi-lpss: ACPI / platform / LPSS: disable async suspend/resume of LPSS devices * acpi-gpio: gpio / ACPI: Use pin index and bit length ACPICA: Update to GPIO region handler interface. * acpi-video: ACPI / video: disable native backlight for ThinkPad X201s
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull gpio fixes from Linus Walleij: "Two GPIO fixes: - GPIO direction flags where handled wrong in the new descriptor- based API, so direction changes did not always "take". - Fix a handler installation race in the generic GPIO irqchip code" * tag 'gpio-v3.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Fix potential NULL handler data in chained irqchip handler gpio: Fix gpio direction flags not getting set
-
- 25 9月, 2014 25 次提交
-
-
git://git.secretlab.ca/git/linux由 Linus Torvalds 提交于
Pull devicetree bug fixes and documentation from Grant Likely: "Several bug fix commits for issues found in the v3.17 rc series. Most of these are minor in that they aren't actively dangerous, but they have been seen in the wild. The one important fix is commit 7dbe5849 ("of: make sure of_alias is initialized before accessing it"), without which some powerpc platforms will fail to find stdout for the console" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of/fdt: fix memory range check of: Fix memory block alignment in early_init_dt_add_memory_arch() of: make sure of_alias is initialized before accessing it of: Documentation regarding attaching OF Selftest testdata of: Disabling OF functions that use sysfs if CONFIG_SYSFS disabled of: correct of_console_check()'s return value
-
由 Peter Hüwe 提交于
If adapter->dev.parent == NULL there is a NULL pointer dereference in acpi_i2c_install_space_handler and acpi_i2c_remove_space_handler. This is present since introduction of this code: 36604751 "i2c: rework kernel config I2C_ACPI" or even da3c6647 "I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI" The adapter->dev.parent == NULL case is valid for the i2c_stub, so loading i2c_stub with ACPI_I2C_OPREGION enabled results in an oops. This is also valid at least for i2c_tiny_usb and i2c_robotfuzz_osif. Fix by checking whether it is null before calling ACPI_HANDLE. Signed-off-by: NPeter Huewe <peterhuewe@gmx.de> Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
-
由 Wolfram Sang 提交于
Commit 5d98e61d ("I2C/ACPI: Add i2c ACPI operation region support") renamed the i2c-core module. This may cause regressions for distributions, so put the ACPI code back into the core. Reported-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Tested-by: NLan Tianyu <tianyu.lan@intel.com> Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
-
由 Srinivas Kandagatla 提交于
In cases where board has below memory DT node memory{ device_type = "memory"; reg = <0x80000000 0x80000000>; }; Check on the memory range in fdt.c will always fail because it is comparing MAX_PHYS_ADDR with base + size, in fact it should compare it with base + size - 1. This issue was originally noticed on Qualcomm IFC6410 board. Without this patch kernel shows up noticed unnecessary warnings [ 0.000000] Machine model: Qualcomm APQ8064/IFC6410 [ 0.000000] Ignoring memory range 0xffffffff - 0x100000000 [ 0.000000] cma: Reserved 64 MiB at ab800000 as a result the size get reduced to 0x7fffffff which looks wrong. This patch fixes the check involved in generating this warning and as a result it also fixes the wrong size calculation. Signed-off-by: NSrinivas Kandagatla <srinivas.kandagatla@linaro.org> [grant.likely: adjust new size calculation also] Signed-off-by: NGrant Likely <grant.likely@linaro.org>
-
由 Rafael J. Wysocki 提交于
Revert commit 6efde38f (PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()) that introduced a NULL pointer dereference during system resume from hibernation: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 PGD b39c2067 PUD b39c1067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: <irrelevant list of modules> CPU: 1 PID: 4898 Comm: s2disk Tainted: G C 3.17-rc5-amd64 #1 Debian 3.17~rc5-1~exp1 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 task: ffff88023155ea40 ti: ffff8800b3b14000 task.ti: ffff8800b3b14000 RIP: 0010:[<ffffffff810a8cc1>] [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 RSP: 0018:ffff8800b3b17ea8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800b39bab00 RCX: 0000000000000001 RDX: ffff8800b39bab10 RSI: ffff8800b39bab00 RDI: 0000000000000000 RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800b39bab10 R11: 0000000000000246 R12: ffffea0000000000 R13: ffff880232f485a0 R14: ffff88023ac27cd8 R15: ffff880232927590 FS: 00007f406d83b700(0000) GS:ffff88023bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000b3a62000 CR4: 00000000000007e0 Stack: ffff8800b39bab00 0000000000000010 ffff880232927590 ffffffff810acb4a ffff8800b39bab00 ffffffff811a955a ffff8800b39bab10 0000000000000000 ffff88023155f098 ffffffff81a6b8c0 ffff88023155ea40 0000000000000007 Call Trace: [<ffffffff810acb4a>] ? snapshot_release+0x2a/0xb0 [<ffffffff811a955a>] ? __fput+0xca/0x1d0 [<ffffffff81080627>] ? task_work_run+0x97/0xd0 [<ffffffff81012d89>] ? do_notify_resume+0x69/0xa0 [<ffffffff8151452a>] ? int_signal+0x12/0x17 Code: 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 41 54 48 8b 05 ba 62 9c 00 49 bc 00 00 00 00 00 ea ff ff 48 8b 3d a1 62 9c 00 55 53 <48> 8b 10 48 89 50 18 48 8b 52 20 48 c7 40 28 00 00 00 00 c7 40 RIP [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 RSP <ffff8800b3b17ea8> CR2: 0000000000000000 ---[ end trace f02be86a1ec0cccb ]--- due to forbidden_pages_map being NULL in swsusp_free(). Fixes: 6efde38f "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()" Reported-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Some final radeon and i915 fixes, black screens mostly" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon/cik: use a separate counter for CP init timeout drm/i915/hdmi: fix hdmi audio state readout drm/i915: Don't leak command parser tables on suspend/resume drm/radeon: add PX quirk for asus K53TK drm/radeon: add a backlight quirk for Amilo Xi 2550 drm/radeon: add a module parameter for backlight control (v2) drm/radeon: Update IH_RB_RPTR register after each processed interrupt drm/radeon: Make IH ring overflow debugging output more useful drm/radeon: Clear RB_OVERFLOW bit earlier
-
由 Srinivas Pandruvada 提交于
Fix code when the operation region callback is for an gpio, which is not at index 0 and for partial pins in a GPIO definition. For example: Name (GMOD, ResourceTemplate () { //3 Outputs that define the Power mode of the device GpioIo (Exclusive, PullDown, , , , "\\_SB.GPI2") {10, 11, 12} }) } If opregion callback calls is for: - Set pin 10, then address = 0 and bit length = 1 - Set pin 11, then address = 1 and bit length = 1 - Set for both pin 11 and pin 12, then address = 1, bit length = 2 This change requires updated ACPICA gpio operation handler code to send the pin index and bit length. Fixes: 473ed7be (gpio / ACPI: Add support for ACPI GPIO operation regions) Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+: 75ec6e55 ACPICA: Update to GPIO region handler interface. Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Bob Moore 提交于
Changes to correct several GPIO issues: 1) The update_rule in a GPIO field definition is now ignored; a read-modify-write operation is never performed for GPIO fields. (Internally, this means that the field assembly/disassembly code is completely bypassed for GPIO.) 2) The Address parameter passed to a GPIO region handler is now the bit offset of the field from a previous Connection() operator. Thus, it becomes a "Pin Number Index" into the Connection() resource descriptor. 3) The bit_width parameter passed to a GPIO region handler is now the exact bit width of the GPIO field. Thus, it can be interpreted as "number of pins". Overall, we can now say that the region handler interface to GPIO handlers is a raw "bit/pin" addressed interface, not a byte-addressed interface like the system_memory handler interface. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLv Zheng <lv.zheng@intel.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
- fix a backlight regression resulting in dark screen - add a PX quirk to avoid a hang with runtime pm - fix an init issue on the CIK compute rings - fix IH ring buffer overflows gracefully * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/cik: use a separate counter for CP init timeout drm/radeon: add PX quirk for asus K53TK drm/radeon: add a backlight quirk for Amilo Xi 2550 drm/radeon: add a module parameter for backlight control (v2) drm/radeon: Update IH_RB_RPTR register after each processed interrupt drm/radeon: Make IH ring overflow debugging output more useful drm/radeon: Clear RB_OVERFLOW bit earlier
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
a couple of small fixes for 3.17 still. * tag 'drm-intel-fixes-2014-09-24' of git://anongit.freedesktop.org/drm-intel: drm/i915/hdmi: fix hdmi audio state readout drm/i915: Don't leak command parser tables on suspend/resume
-
由 Fu Zhonghui 提交于
On some systems (Asus T100 in particular) there are strict ordering dependencies between LPSS devices with respect to power management that break if they suspend/resume asynchronously. In theory it should be possible to follow those dependencies in the async suspend/resume case too (the ACPI tables tell as that the dependencies are there), but since we're missing infrastructure for that at the moment, disable async suspend/resume for all of the LPSS devices for the time being. Link: http://marc.info/?l=linux-acpi&m=141158962321905&w=2 Fixes: 8ce62f85 (ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices) Signed-off-by: NLi Aubrey <aubrey.li@linux.intel.com> Signed-off-by: NFu Zhonghui <zhonghui.fu@linux.intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ [ rjw: Changelog ] Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: "Here is a quick pull request primarily meant to address the deconfig fallout from changing SCSI_NETLINK from being used via 'select' to being used via 'depends'. I applied a set of 5 patches written by Michal Marek, and then I carefully audited all of the remaining config files, basically: 1) I scanned every arch config file, and if it mentioned CONFIG_INET or CONFIG_UNIX, I made sure it had CONFIG_NET=y 2) After that, I scanned every arch config file, and if it did not have CONFIG_NET=y I made sure it did not reference any networking config options. Finally, we have some late breaking wireless fixes in here from John Linville and co" [ And there's a sparc bpf fix snuck in too ] * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: sparc: bpf_jit: fix loads from negative offsets parisc: Update defconfigs which were missing CONFIG_NET. powerpc: Update defconfigs which were missing CONFIG_NET. s390: Update defconfigs which were missing CONFIG_NET. mips: Update some more defconfigs which were missing CONFIG_NET. sparc: Set CONFIG_NET=y in defconfigs sh: Set CONFIG_NET=y in defconfigs powerpc: Set CONFIG_NET=y in defconfigs parisc: Set CONFIG_NET=y in defconfigs mips: Set CONFIG_NET=y in defconfigs brcmfmac: Fix off by one bug in brcmf_count_20mhz_channels() ath9k: Fix NULL pointer dereference on early irq net: rfkill: gpio: Fix clock status NFC: st21nfca: Fix potential depmod dependency cycle NFC: st21nfcb: Fix depmod dependency cycle NFC: microread: Potential overflows in microread_target_discovered()
-
由 Alexei Starovoitov 提交于
- fix BPF_LD|ABS|IND from negative offsets: make sure to sign extend lower 32 bits in 64-bit register before calling C helpers from JITed code, otherwise 'int k' argument of bpf_internal_load_pointer_neg_helper() function will be added as large unsigned integer, causing packet size check to trigger and abort the program. It's worth noting that JITed code for 'A = A op K' will affect upper 32 bits differently depending whether K is simm13 or not. Since small constants are sign extended, whereas large constants are stored in temp register and zero extended. That is ok and we don't have to pay a penalty of sign extension for every sethi, since all classic BPF instructions have 32-bit semantics and we only need to set correct upper bits when transitioning from JITed code into C. - though instructions 'A &= 0' and 'A *= 0' are odd, JIT compiler should not optimize them out Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless由 David S. Miller 提交于
John W. Linville says: ==================== pull request: wireless 2014-09-23 Please consider pulling this one last batch of fixes intended for the 3.17 stream! For the NFC bits, Samuel says: "Hopefully not too late for a handful of NFC fixes: - 2 potential build failures for ST21NFCA and ST21NFCB, triggered by a depmod dependenyc cycle. - One potential buffer overflow in the microread driver." On top of that... Emil Goode provides a fix for a brcmfmac off-by-one regression which was introduced in the 3.17 cycle. Loic Poulain fixes a polarity mismatch for a variable assignment inside of rfkill-gpio. Wojciech Dubowik prevents a NULL pointer dereference in ath9k. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Commit df568d8e ("scsi: Use 'depends' with LIBFC instead of 'select'.") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Marek 提交于
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: sparclinux@vger.kernel.org Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Marek 提交于
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: linux-sh@vger.kernel.org Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Marek 提交于
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Marek 提交于
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: linux-parisc@vger.kernel.org Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Marek 提交于
Commit 5d6be6a5 ("scsi_netlink : Make SCSI_NETLINK dependent on NET instead of selecting NET") removed what happened to be the only instance of 'select NET'. Defconfigs that were relying on the select now lack networking support. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: linux-mips@linux-mips.org Signed-off-by: NMichal Marek <mmarek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull one last block fix from Jens Axboe: "We've had an issue with scsi-mq where probing takes forever. This was bisected down to the percpu changes for blk_mq_queue_enter(), and the fact we now suffer an RCU grace period when killing a queue. SCSI creates and destroys tons of queues, so this let to 10s of seconds of stalls at boot for some. Tejun has a real fix for this, but it's too involved for 3.17. So this is a temporary workaround to expedite the queue killing until we can fold in the real fix for 3.18 when that merge window opens" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI fixes from Bjorn Helgaas: "Here are a few fixes that should be in v3.17. - Reverting "Don't scan random busses" covers up a CardBus regression having to do with allocating CardBus bus numbers. - Reverting "Make sure bus numbers stay within parents bounds" covers up an ACPI _CRS bug that makes us reconfigure a bridge, causing a broken device behind it to stop responding. - The pciehp timeout change fixes some code we added in v3.17. Without the fix, we can send a new hotplug command too early, before the timeout has expired. I hope for better fixes for the reverts, but those will have to come after v3.17" * tag 'pci-v3.17-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: pciehp: Fix pcie_wait_cmd() timeout Revert "PCI: Make sure bus number resources stay within their parents bounds" Revert "PCI: Don't scan random busses in pci_scan_bridge()"
-