- 03 11月, 2012 15 次提交
-
-
由 Ben Hutchings 提交于
Commit e5a55a89 ('net: create generic bridge ops') broke the handling of a non-zero starting index in rtnl_bridge_getlink() (based on the old br_dump_ifinfo()). When the starting index is non-zero, we need to increment the current index for each entry that we are skipping. Also, we need to check the index before both cases, since we may previously have stopped iteration between getting information about a device from its master and from itself. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Tested-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
fib6_add_rt2node() will reject the nexthop if this flag is set, so we perform the check only for the first nexthop. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Since this array is no longer part of the bridge driver, it should have an 'eth' prefix not 'br'. We also assume that either it's 16-bit-aligned or the architecture has efficient unaligned access. Ensure the first of these is true by explicitly aligning it. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Function name should include '_ether_addr'. Return type should be bool. Parameter name should be 'addr' not 'dest' (also matching kernel-doc). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Parse the string into an array of bytes rather than ints, so we can use is_link_local() rather than reimplementing it. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
This was missed in commit a24006ed ('ptp: Enable clock drivers along with associated net/PHY drivers') which enabled sfc's clock driver unconditionally. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
It seems that to avoid deadlocks it is enough to poll vq before we are going to use the last buffer. This is faster than c70aa540. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Even when vhost-net is in zero-copy transmit mode, net core might still decide to copy the skb later which is somewhat slower than a copy in user context: data copy overhead is added to the cost of page pin/unpin. The result is that enabling tx zero copy option leads to higher CPU utilization for guest to guest and guest to host traffic. To fix this, suppress zero copy tx after a given number of packets triggered late data copy. Re-enable periodically to detect workload changes. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Zerocopy handling code is vhost-net specific. Move it from vhost.c/vhost.h out to net.c Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
This will be used to disable zerocopy when error rate is high. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Better document macros for DMA tracking. Add an explicit one for DMA in progress instead of relying on user supplying len != 1. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
When tun transmits a zero copy skb, it orphans the frags which might need to allocate extra memory, in atomic context. If that fails, notify ubufs callback before freeing the skb as a hint that device should disable zerocopy mode. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Orphaning frags for zero copy skbs needs to allocate data in atomic context so is has a chance to fail. If it does we currently discard the skb which is safe, but we don't report anything to the caller, so it can not recover by e.g. disabling zero copy. Add an API to free skb reporting such errors: this is used by tun in case orphaning frags fails. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
Even if skb is marked for zero copy, net core might still decide to copy it later which is somewhat slower than a copy in user context: besides copying the data we need to pin/unpin the pages. Add a parameter reporting such cases through zero copy callback: if this happens a lot, device can take this into account and switch to copying in user context. This patch updates all users but ignores the passed value for now: it will be used by follow-up patches. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== This series contains updates to igb, ixgbe and e1000. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2012 19 次提交
-
-
由 Amerigo Wang 提交于
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amerigo Wang 提交于
#if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 stephen hemminger 提交于
This was picked up by sparse. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Li 提交于
This patch adds a driver for the FEC(MX6) that offers time stamping and a PTP haderware clock. Because FEC\ENET(MX6) hardware frequency adjustment is complex, we have implemented this in software by changing the multiplication factor of the timecounter. Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Li 提交于
Set GRP1 BIT21 ENET_CLK_SEL: Enet tx reference clk from internal clock from anatop (loopback through pad), this clock also sent out to external PHY Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Li 提交于
Add ENET 1588 clock input pin MX6Q_PAD_GPIO_16__ENET_ANATOP_ETHERNET_REF_OUT and anatop PLL8 clock source for ENET Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Li 提交于
A new file fec_ptp.c will use fec_enet_private to support 1588 PTP move such structure to common header file fec.h Signed-off-by: NFrank Li <Frank.Li@freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch hooks into the CPTS code and adds support for the HWTSTAMP ioctl. The patch includes code for the CPSW version found in the dm814x even though the background device tree support for this board is still missing. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch adds a way to configure the CPTS input clock scaling factors via the device tree. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Because time stamping on both external ports of the switch simultaneously is positively useless from the application's point of view, this patch provides a DT configuration method to choose the active port. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch adds a driver for the CPTS that offers time stamping and a PTP hardware clock. Because some of the CPTS hardware variants (like the am335x) do not support frequency adjustment, we have implemented this in software by changing the multiplication factor of the timecounter. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch fixes the cpsw driver to operate correctly with both the dm814x and the am335x versions of the switch hardware. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
This patch lets the CPSW driver remember the version number in order to support the two different variants already in the wild. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
The code mixes up the CPSW_SS and the CPSW_WR register naming. This patch changes the names to conform to the published Technical Reference Manual from TI, in order to make working on the code less confusing. Signed-off-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Adding multicast address to ALE table via netdev ops to subscribe, transmit or receive multicast frames to and from the network Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 11月, 2012 6 次提交
-
-
If no pinctrl available just report a warning as some architecture may not need to do anything. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [nicolas.ferre@atmel.com: adapt the error path, remove unneeded headers] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Havard Skinnemoen 提交于
Make the ethernet frame payload word-aligned, possibly making the memcpy into the skb a bit faster. This will be even more important after we eliminate the copy altogether. Also eliminate the redundant RX_OFFSET constant -- it has the same definition and purpose as NET_IP_ALIGN. Signed-off-by: NHavard Skinnemoen <havard@skinnemoen.net> [nicolas.ferre@atmel.com: adapt to newer kernel] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Ferre 提交于
Handle all TX errors, not only underruns. TX error management is deferred to a dedicated workqueue. Reinitialize the TX ring after treating all remaining frames, and restart the controller when everything has been cleaned up properly. Napi is not stopped during this task as the driver only handles napi for RX for now. With this sequence, we do not need a special check during the xmit method as the packets will be caught by TX disable during workqueue execution. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Ferre 提交于
Add macb_get_regs() ethtool function and its helper function: macb_get_regs_len(). The version field is deduced from the IP revision which gives the "MACB or GEM" information. An additional version field is reserved. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: NBen Hutchings <bhutchings@solarflare.com> Tested-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Havard Skinnemoen 提交于
Instead of masking head and tail every time we increment them, just let them wrap through UINT_MAX and mask them when subscripting. Add simple accessor functions to do the subscripting properly to minimize the chances of messing this up. This makes the code slightly smaller, and hopefully faster as well. Also, doing the ring buffer management this way will simplify things a lot when making the ring sizes configurable in the future. Available number of descriptors in ring buffer function by David Laight. Signed-off-by: NHavard Skinnemoen <havard@skinnemoen.net> [nicolas.ferre@atmel.com: split patch in topics, adapt to newer kernel] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Ferre 提交于
On some revision of GEM, TSR status register has more information. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Tested-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-