- 10 7月, 2008 40 次提交
-
-
由 Trond Myklebust 提交于
Move the UDP/TCP default timeo/retrans settings for text mounts to nfs_init_timeout_values(), which was were they were always being initialised (and sanity checked) for binary mounts. Document the default timeout values using appropriate #defines. Ensure that we initialise and sanity check the transport protocols that may have been specified by the user. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Some server vendors support the higher versions of rpcbind only for AF_INET6. The kernel doesn't need to use v3 or v4 for AF_INET anyway, so change the kernel's rpcbind client to query AF_INET servers over rpcbind v2 only. This has a few interesting benefits: 1. If the rpcbind request is going over TCP, and the server doesn't support rpcbind versions 3 or 4, the client reduces by two the number of ephemeral ports left in TIME_WAIT for each rpcbind request. This will help during NFS mount storms. 2. The rpcbind interaction with servers that don't support rpcbind versions 3 or 4 will use less network traffic. Also helpful during mount storms. 3. We can eliminate the kernel build option that controls whether the kernel's rpcbind client uses rpcbind version 3 and 4 for AF_INET servers. Less complicated kernel configuration... Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Some rpcbind servers that do support rpcbind version 4 do not support the GETVERSADDR procedure. Use GETADDR for querying rpcbind servers via rpcbind version 4 instead of GETVERSADDR. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Change the version 2 procedure name to GETPORT. It's the same procedure number as GETADDR, but version 2 implementations usually refer to it as GETPORT. This also now matches the procedure name used in the version 2 procedure entry in the rpcb_next_version[] array, making it slightly less confusing. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Replace naked integers that represent rpcbind protocol versions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up dprintk's in rpcb client's XDR decoder functions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
If the nfsv4 callback thread is rapidly brought up and down, it's possible that nfs_callback_svc might never get a chance to run. If this happens, the cleanup at thread exit might never occur, throwing the refcounting off and nfs_callback_info in an incorrect state. Move the clean functions into nfs_callback_down. Also change the nfs_callback_info struct to track the svc_rqst rather than svc_serv since we need to know that to call svc_exit_thread. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
The nfs_callback_mutex is sufficient protection. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Benny Halevy 提交于
gcc (4.3.0) rightfully warns about this: /usr0/export/dev/bhalevy/git/linux-pnfs-bh-nfs41/fs/nfs/nfs4proc.c: In function nfs4_proc_setclientid_confirm: /usr0/export/dev/bhalevy/git/linux-pnfs-bh-nfs41/fs/nfs/nfs4proc.c:2936: warning: timeout may be used uninitialized in this function nfs4_delay that's passed a pointer to 'timeout' is looking at its value and sets it up to some value in the range: NFS4_POLL_RETRY_MIN..NFS4_POLL_RETRY_MAX if (*timeout <= 0) *timeout = NFS4_POLL_RETRY_MIN; if (*timeout > NFS4_POLL_RETRY_MAX) *timeout = NFS4_POLL_RETRY_MAX; Therefore it will end up set to some sane, though rather indeterministic, value. Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add support in the kernel NFS client's address parser for interface identifiers. IPv6 link-local addresses require an additional "interface identifier", which is a network device name or an integer that indexes the array of local network interfaces. They are suffixed to the address with a '%'. For example: fe80::215:c5ff:fe3b:e1b2%2 indicates an interface index of 2. Or fe80::215:c5ff:fe3b:e1b2%eth0 indicates that requests should be routed through the eth0 device. Without the interface ID, link-local addresses are not usable for NFS. Both the kernel NFS client mount option parser and the mount.nfs command can take either form. The mount.nfs command always passes the address through getnameinfo(3), which usually re-writes interface indices as device names. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
To make nfs_parse_server_address() more generally useful, allow it to accept input strings that are not terminated with '\0'. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Traditionally the mount command has looked for a ":" to separate the server's hostname from the export path in the mounted on device name, like this: mount server:/export /mounted/on/dir The server's hostname is "server" and the export path is "/export". You can also substitute a specific IPv4 network address for the server hostname, like this: mount 192.168.0.55:/export /mounted/on/dir Raw IPv6 addresses present a problem, however, because they look something like this: fe80::200:5aff:fe00:30b Note the use of colons. To get around the presence of colons, copy the Solaris convention used for mounting IPv6 servers by address: wrap a raw IPv6 address with square brackets. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
To support passing a raw IPv6 address as a server hostname, we need to expand the logic that handles splitting the passed-in device name into a server hostname and export path Start by pulling device name parsing out of the mount option validation functions and into separate helper functions. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Fix the 'nfs4_fs_type' undeclared error in nfs_remount when compiling sans NFSv4... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: Jeff Layton <jlayton@redhat.com>
-
由 Trond Myklebust 提交于
Currently, if an unstable write completes, we cannot redirty the page in order to reflect a new change in the page data until after we've sent a COMMIT request. This patch allows a page rewrite to proceed without the unnecessary COMMIT step, putting it immediately back onto the dirty page list, undoing the VM unstable write accounting, and removing the NFS_PAGE_TAG_COMMIT tag from the NFS radix tree. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Simplify the loop in nfs_update_request by moving into a separate function the code that attempts to update an existing cached NFS write. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: the "intr" and "nointr" mount options were recently retired. Document this in the NFS mount option parser. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The kernel NFS mount option parser should ignore the retry= mount option since it is meaningful only in user space. Today it expects a number rather than arbitrary text, so it ignores the option if the value is numeric, but chokes if there are other characters in the value. Change it to allow any text (except ",") as its value. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
...and ensure that we obey the NFS_INO_INVALID_ACL flag when retrieving the acls. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We're not modifying the nfs_server when we call nfs_inc_server_stats and friends, so allow the compiler to pass 'const' pointers too. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The fs/nfs/iostat.h header has definitions that were designed to be exposed to user space. Move these definitions under include/linux so user space can use the definitions in applications that read /proc/self/mountstats. Also address a handful of coding style issues called out by checkpatch.pl in fs/nfs/iostat.h. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
All instances are set to nfs_open(), so we should just remove the redundant indirection. Ditto for the file_release op Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The RPC client uses the rq_xtime field in each RPC request to determine the round-trip time of the request. Currently, the rq_xtime field is initialized by each transport just before it starts enqueing a request to be sent. However, transports do not handle initializing this value consistently; sometimes they don't initialize it at all. To make the measurement of request round-trip time consistent for all RPC client transport capabilities, pull rq_xtime initialization into the RPC client's generic transport logic. Now all transports will get a standardized RTT measure automatically, from: xprt_transmit() to xprt_complete_rqst() This makes round-trip time calculation more accurate for the TCP transport. The socket ->sendmsg() method can return "-EAGAIN" if the socket's output buffer is full, so the TCP transport's ->send_request() method may call the ->sendmsg() method repeatedly until it gets all of the request's bytes queued in the socket's buffer. Currently, the TCP transport sets the rq_xtime field every time through that loop so the final value is the timestamp just before the *last* call to the underlying socket's ->sendmsg() method. After this patch, the rq_xtime field contains a timestamp that reflects the time just before the *first* call to ->sendmsg(). This is consequential under heavy workloads because large requests often take multiple ->sendmsg() calls to get all the bytes of a request queued. The TCP transport causes the request to sleep until the remote end of the socket has received enough bytes to clear space in the socket's local output buffer. This delay can be quite significant. The method introduced by this patch is a more accurate measure of RTT for stream transports, since the server can cause enough back pressure to delay (ie increase the latency of) requests from the client. Additionally, this patch corrects the behavior of the RDMA transport, which entirely neglected to initialize the rq_xtime field. RPC performance metrics for RDMA transports now display correct RPC request round trip times. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Acked-by: NTom Talpey <thomas.talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
ftruncate() access checking is supposed to be performed at open() time, just like reads and writes. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \\\"J. Bruce Fields\\\ 提交于
Try to make the comment here a little more clear and concise. Also, this macro definition seems unnecessary. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \\\"J. Bruce Fields\\\ 提交于
There used to be a print_hexl() function that used isprint(), now gone. I don't know why NFS_NGROUPS and CA_RUN_AS_MACHINE were here. I also don't know why another #define that's actually used was marked "unused". Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \\\"J. Bruce Fields\\\ 提交于
Also, a minor comment grammar fix in the same file. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Olga Kornievskaia 提交于
The cl_chatty flag alows us to control whether a given rpc client leaves "server X not responding, timed out" messages in the syslog. Such messages make sense for ordinary nfs clients (where an unresponsive server means applications on the mountpoint are probably hanging), but not for the callback client (which can fail more commonly, with the only result just of disabling some optimizations). Previously cl_chatty was removed, do to lack of users; reinstate it, and use it for the nfsd's callback client. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jeff Layton 提交于
When remounting an NFS or NFS4 filesystem, the new NFS options are not respected, yet the remount will still return success. This patch adds a remount_fs sb op for NFS that checks any new nfs mount options against the existing ones and fails the mount if any have changed. This is only implemented for string-based mount options since doing this with binary options isn't really feasible. This is essentially the same as the original patch I sent out, but adds a check to see if the addr= option has changed. Signed-off-by: NJeff Layton <jlayton@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Adrian Bunk 提交于
This patch removes a CVS keyword that wasn't updated for a long time from a comment. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Recent changes to the RPC client's transport connect logic make connect status values ECONNREFUSED and ECONNRESET impossible. Clean up xprt_connect_status() to account for these changes. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: fix a few dprintk messages that still need to show the RPC task ID correctly, and be sure we use the preferred %lld or %llu instead of %Ld or %Lu. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: some fops use NFSDBG_FILE, some use NFSDBG_VFS. Let's use NFSDBG_FILE for all fops, and consistently report file names instead of inode numbers. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Recent work in fs/nfs/file.c neglected to add appropriate trace debugging for the NFS client's address space operations. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Report the same debugging info and count function calls the same for files and directories in nfs_opendir() and nfs_file_open(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Report the same debugging info in nfs_llseek_dir() and nfs_llseek_file(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: Report the same debugging info, count function calls the same, and use similar function naming in nfs_fsync_dir() and nfs_fsync(). Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
In rpc_show_tasks(), display the program name, version number, procedure name and tk_action as human-readable variable-length text fields rather than columnar numbers. Doing the symbol lookup here helps in cases where we have actual debugging output from a kernel log, but don't have access to the kernel image or RPC module that generated the output. Sample output: -pid- flgs status -client- --rqstp- -timeout ---ops-- 5608 0001 -11 eeb42690 f6d93710 0 f8fa1764 nfsv3 WRITE a:call_transmit_status q:none 5609 0001 -11 eeb42690 f6d937e0 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5610 0001 -11 eeb42690 f6d93230 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5611 0001 -11 eeb42690 f6d93300 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5612 0001 -11 eeb42690 f6d93090 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5613 0001 -11 eeb42690 f6d933d0 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5614 0001 -11 eeb42690 f6d93cc0 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5615 0001 -11 eeb42690 f6d93a50 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5616 0001 -11 eeb42690 f6d93640 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5617 0001 -11 eeb42690 f6d93b20 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending 5618 0001 -11 eeb42690 f6d93160 0 f8fa1764 nfsv3 WRITE a:call_status q:xprt_sending Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clean up: move the logic that displays each task to its own function. This removes indentation and makes future changes easier. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-