fix netdev->priv ==> netdev_priv(netdev)
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

deinline a few large functions as to allow the compiler to pick.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

This mimics a change made in the e1000 driver that imitates a slick
tg3 way of avoiding grabbing the lock around restarting the tx queue.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

In order to help correct window size growth, use the MFS register
to limit the packet sizes received and allocate only the buffer
size necessary
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

index 0905a82..84a8064 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -574,9 +574,8 @@ ixgb_sw_init(struct ixgb_adapter *adapte
 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 	hw->subsystem_id = pdev->subsystem_device;

-	adapter->rx_buffer_len = IXGB_RXBUFFER_2048;
-
 	hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+	adapter->rx_buffer_len = hw->max_frame_size;

 	if((hw->device_id == IXGB_DEVICE_ID_82597EX)
 	   || (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4)
@@ -820,21 +819,14 @@ ixgb_setup_rctl(struct ixgb_adapter *ada

 	rctl |= IXGB_RCTL_SECRC;

-	switch (adapter->rx_buffer_len) {
-	case IXGB_RXBUFFER_2048:
-	default:
+	if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048)
 		rctl |= IXGB_RCTL_BSIZE_2048;
-		break;
-	case IXGB_RXBUFFER_4096:
+	else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096)
 		rctl |= IXGB_RCTL_BSIZE_4096;
-		break;
-	case IXGB_RXBUFFER_8192:
+	else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192)
 		rctl |= IXGB_RCTL_BSIZE_8192;
-		break;
-	case IXGB_RXBUFFER_16384:
+	else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384)
 		rctl |= IXGB_RCTL_BSIZE_16384;
-		break;
-	}

 	IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
 }
@@ -1551,25 +1543,12 @@ ixgb_change_mtu(struct net_device *netde
 		DPRINTK(PROBE, ERR, "Invalid MTU setting %d\n", new_mtu);
 		return -EINVAL;
 	}
-
-	if((max_frame <= IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH)
-	   || (max_frame <= IXGB_RXBUFFER_2048)) {
-		adapter->rx_buffer_len = IXGB_RXBUFFER_2048;
-
-	} else if(max_frame <= IXGB_RXBUFFER_4096) {
-		adapter->rx_buffer_len = IXGB_RXBUFFER_4096;

-	} else if(max_frame <= IXGB_RXBUFFER_8192) {
-		adapter->rx_buffer_len = IXGB_RXBUFFER_8192;
+	adapter->rx_buffer_len = max_frame;

-	} else {
-		adapter->rx_buffer_len = IXGB_RXBUFFER_16384;
-	}
-
 	netdev->mtu = new_mtu;
-
-	if(old_max_frame != max_frame && netif_running(netdev)) {

+	if ((old_max_frame != max_frame) && netif_running(netdev)) {
 		ixgb_down(adapter, TRUE);
 		ixgb_up(adapter);
 	}

There seemed to be another bug introduced as well as a performance hit
with the addtion of the sentinel descriptor workaround.  Removal of
this workaround appears to prevent the hang.  We'll take a risk
and remove it, as we had never seen the originally reported bug
under linux.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

user contributed fix for LAA across down/up, from tonychung00@users.sf.net.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

Moved interrupt masking to before requesting the interrupt from the OS.
Moved interrupt enable to after netif_poll_enable.  This fixes a racy
BUG() where polling would be running on another CPU at the same time
that netif_poll_enable would run.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

Increment the driver version to 1.0.104-k4
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

o use rx copybreak/skb recycle
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

o modify the rx refill logic and tail bump
o add counter for failures
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>

new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem
Signed-off-by: NHerbert Valerio Riedel <hvr@gnu.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch provides a sysfs interface to change some properties of the
ibmveth buffer pools (size of the buffers, number of buffers per pool,
and whether a pool is active).  Ethernet drivers use ethtool to provide
this type of functionality.  However, the buffers in the ibmveth driver
can have an arbitrary size (not only regular, mini, and jumbo which are
the only sizes that ethtool can change), and also ibmveth can have an
arbitrary number of buffer pools

Under heavy load we have seen dropped packets which obviously kills TCP
performance.  We have created several fixes that mitigate this issue,
but we definitely need a way of changing the number of buffers for an
adapter dynamically.  Also, changing the size of the buffers allows
users to change the MTU to something big (bigger than a jumbo frame)
greatly improving performance on partition to partition transfers.

The patch creates directories pool1...pool4 in the device directory in
sysfs, each with files: num, size, and active (which default to the
values in the mainline version).

Comments and suggestions are welcome...
--
Santiago A. Leon
Power Linux Development
IBM Linux Technology Center
Signed-off-by: NJeff Garzik <jeff@garzik.org>

On Mon, May 15, 2006 at 12:56:37AM -0700, Andrew Morton wrote:
>...
> Changes since 2.6.17-rc3-mm1:
>...
>  git-netdev-all.patch
>...
>  git trees
>...

This patch makes the needlessly global bus_speed[] static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The truncate threshold calculation to prevent receiver from getting stuck
was incorrect, and it didn't take into account the upper limit on bits
in the register so the jumbo packet support was broken.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Merge branch 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream

Add TRENDnet TE-CF100 ethernet adapter to pcnet_cs list.

product info: "Fast Ethernet", "CF Size PC Card", "1.0", ""
 manfid: 0x0149, 0xc1ab
Signed-off-by: NMarcin Juszkiewicz <openembedded@hrw.one.pl>

 drivers/net/pcmcia/pcnet_cs.c |    2 ++
 1 file changed, 2 insertions(+)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NAndrew J. Gallatin <gallatin@myri.com>

 drivers/net/Kconfig                            |   17
 drivers/net/Makefile                           |    1
 drivers/net/myri10ge/Makefile                  |    5
 drivers/net/myri10ge/myri10ge.c                | 2851 +++++++++++++++
 drivers/net/myri10ge/myri10ge_mcp.h            |  205 +
 drivers/net/myri10ge/myri10ge_mcp_gen_header.h |   58
 include/linux/pci_ids.h                        |    1
 7 files changed, 3138 insertions(+)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch revives pci_find_ext_capability (has been disabled a couple month
ago since it was not used anywhere. See http://lkml.org/lkml/2006/1/20/247).
It will now be used by the myri10ge driver.
Signed-off-by: NBrice Goglin <brice@myri.com>
Signed-off-by: NAndrew J. Gallatin <gallatin@myri.com>

 drivers/pci/pci.c   |    3 +--
 include/linux/pci.h |    2 ++
 2 files changed, 3 insertions(+), 2 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Bridge will OOPS on removal if other application has the SAP open.
The bridge SAP might be shared with other usages, so need
to do reference counting on module removal rather than explicit
close/delete.

Since packet might arrive after or during removal, need to clear
the receive function handle, so LLC only hands it to user (if any).
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If kmalloc fails, error path leaks data allocated from asn1_oid_decode().
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When parsing unknown sequence extensions the "son"-pointer points behind
the last known extension for this type, don't try to interpret it.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The condition "> H323_ERROR_STOP" can never be true since H323_ERROR_STOP
is positive and is the highest possible return code, while real errors are
negative, fix the checks. Also only abort on real errors in some spots
that were just interpreting any return value != 0 as error.

Fixes crashes caused by use of stale data after a parsing error occured:

BUG: unable to handle kernel paging request at virtual address bfffffff
 printing eip:
c01aa0f8
*pde = 1a801067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT
Modules linked in: ip_nat_h323 ip_conntrack_h323 nfsd exportfs sch_sfq sch_red cls_fw sch_hfsc  xt_length ipt_owner xt_MARK iptable_mangle nfs lockd sunrpc pppoe pppoxx
CPU:    0
EIP:    0060:[<c01aa0f8>]    Not tainted VLI
EFLAGS: 00210646   (2.6.17-rc4 #8)
EIP is at memmove+0x19/0x22
eax: d77264e9   ebx: d77264e9   ecx: e88d9b17   edx: d77264e9
esi: bfffffff   edi: bfffffff   ebp: de6a7680   esp: c0349db8
ds: 007b   es: 007b   ss: 0068
Process asterisk (pid: 3765, threadinfo=c0349000 task=da068540)
Stack: <0>00000006 c0349e5e d77264e3 e09a2b4e e09a38a0 d7726052 d7726124 00000491
       00000006 00000006 00000006 00000491 de6a7680 d772601e d7726032 c0349f74
       e09a2dc2 00000006 c0349e5e 00000006 00000000 d76dda28 00000491 c0349f74
Call Trace:
 [<e09a2b4e>] mangle_contents+0x62/0xfe [ip_nat]
 [<e09a2dc2>] ip_nat_mangle_tcp_packet+0xa1/0x191 [ip_nat]
 [<e0a2712d>] set_addr+0x74/0x14c [ip_nat_h323]
 [<e0ad531e>] process_setup+0x11b/0x29e [ip_conntrack_h323]
 [<e0ad534f>] process_setup+0x14c/0x29e [ip_conntrack_h323]
 [<e0ad57bd>] process_q931+0x3c/0x142 [ip_conntrack_h323]
 [<e0ad5dff>] q931_help+0xe0/0x144 [ip_conntrack_h323]
...

Found by the PROTOS c07-h2250v4 testsuite.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAuke Kok <auke.jan.h.kok@intel.com>

This honours the request to remove the changelog in the driver code.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

I forgot to update the date string in the Makefile last time.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

Some leading and trailing whitespace made it into the driver code here.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

This removes unwanted characters in the debug output that should have
never been there.
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

Someone was waaay too aggressive and removed e1000's reboot notifier
instead of porting it to the new way of the shutdown handler.  This change
broke wake on lan.  Add the shutdown handler back in using the same method
as e100 uses.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com>

Those functions don't exist on PPC64 architecture.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

reference to .init.text: from .text between 'dvb_bt8xx_probe'
(at offset 0x122c) and 'dvb_bt8xx_remove'
reference to .init.text: from .text between 'dvb_bt8xx_probe'
(at offset 0x1267) and 'dvb_bt8xx_remove'
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Ref: Bugzilla 6179, 6589
Signed-off-by: NManu Abraham <manu@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If CONFIG_VIDEO_DEV=m and CONFIG_VIDEO_V4L1_COMPAT=y, v4l1-compat should
be built as a module (currently, it isn't built at all leading to
problems with modules using it).
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Respect gfp_t argument to dma_alloc_coherent().

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: SNMP NAT: fix memory corruption
  [IRDA]: fixup type of ->lsap_state
  [IRDA]: fix 16/32 bit confusion
  [NET]: Fix "ntohl(ntohs" bugs
  [BNX2]: Use kmalloc instead of array
  [BNX2]: Fix bug in bnx2_nvram_write()
  [TG3]: Add some missing rx error counters