HPD is digital only.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

If we were not able to map the io bar in device init, don't attempt
to unmap it in device fini.  All radeons should have a io bar, so
I doubt this would ever trigger, but just to be on the safe side...

Pointed out by: Alberto Milone <alberto.milone@canonical.com>
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This interface allows userspace to request hyperz support, it probably
needs more locking, and really reporting that you can have hyperz is racy
since someone else might get it before you do.

v2: modify so we pass 0 valued packets to let DDX/r300c keep working.
also fixed incorrect 0x4f1c reference.

v3: fixup zb_bw_cntl so older drivers keep working

v4: add locking, fixup SC_HYPERZ_EN - patch stream to disable hiz
Signed-off-by: NDave Airlie <airlied@redhat.com>

This migrates a bunch of DRM_DEBUG->DRM_DEBUG_KMS so we can get more modesetting related info without all the other ioctl handling easily.

Also the PM code moves to DRM_DEBUG_DRIVER mostly.
Signed-off-by: NDave Airlie <airlied@redhat.com>

* 'nouveau/for-airlied' of ../drm-nouveau-next: (77 commits)
  drm/nouveau: set TASK_(UN)INTERRUPTIBLE before schedule_timeout()
  drm/nv50: fix some not-error error messages
  drm/nouveau: introduce gpio engine
  drm/nv50: correct wait condition for instmem flush
  drm/nouveau: Fix TV-out detection on unposted cards lacking a usable DCB table.
  drm/nouveau: Get rid of the remaining VGA CRTC locking.
  drm/nouveau: Move display init to a new nouveau_engine.
  drm/nouveau: Put back the old 2-messages I2C slave test.
  drm/nouveau: Reset AGP before running the init scripts.
  drm/nv30: Init the PFB+0x3xx memory timing regs.
  drm/nouveau: disable hotplug detect around DP link training
  drm/nv50: add function to control GPIO IRQ reporting
  drm/nouveau: add nv_mask register accessor
  drm/nouveau: fix build without CONFIG_ACPI
  drm/nouveau: Reset CRTC owner to 0 before BIOS init.
  drm/nouveau: No need to lock/unlock the VGA CRTC regs all the time.
  drm/nouveau: Remove useless CRTC_OWNER logging.
  drm/nouveau: Add some generic I2C gadget detection code.
  drm/i2c/ch7006: Don't assume that the specified config points to static memory.
  drm/nv04-nv3x: Implement init-compute-mem.
  ...

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_bios.c

* 'drm-radeon-next' of ../drm-radeon-next: (333 commits)
  drm/radeon/kms: trivial code style fixes for audio
  drm/radeon: remove viewport transform from r6xx/r7xx blit emit
  drm/radeon: group r6xx/r7xx newly sequential blit state
  drm/radeon: reorder r6xx/r7xx blit state emit to make more regs sequential
  drm/radeon: r6xx/r7xx move vport clipping to a single packet
  drm/radeon: group r6xx/r7xx sequential blit state
  drm/radeon: remove duplicate state emit in r6xx/r7xx blit
  drm/radeon: add comments to r6xx/r7xx blit state
  drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush
  drm/radeon/kms: remove rs4xx gart limit
  drm: radeon: fix sign bug
  drm/radeon/kms: check/restore sanity before doing anything else with GPU.
  drm/radeon: fall back to GTT if bo creation/validation in VRAM fails.
  drm/radeon/kms: add ioport register access
  drm/radeon/kms: enable HDMI audio on RS600/RS690/RS740
  drm/radeon/kms: track audio engine state, do not use not setup timer
  drm/radeon/kms/r6xx+: add query for tile config (v2)
  drm/radeon/kms: fix CS alignment checking for tiling (v2)
  drm/radeon/kms: add tiling support to the cs checker for r6xx/r7xx
  drm/radeon/kms: Add crtc tiling setup support for evergreen
  ...

sil164 transmitters are used for DVI outputs on Intel/nvidia and ATI setups.

So far only nouveau can use this driver.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Tested-by: NPatrice Mandin <patmandin@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace, macro and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace, macro and spacing coding style issues.
Simplified
 -if (ret) return ret;
 -return 0;
 +return ret;
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace and spacing coding style issues.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Fixed brace, macro and spacing coding style issues, and a C99 comment.
Signed-off-by: NNicolas Kaiser <nikai@nikai.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The device name is tightly coupled and created at the same time as the
master->unique address, so we need to free it with the master. Currently
we overwrite it each time we create a new master:

unreferenced object 0xe32c54b0 (size 32):
  comm "Xorg", pid 1455, jiffies 4294721798 (age 3196.879s)
  hex dump (first 32 bytes):
    69 39 31 35 40 70 63 69 3a 30 30 30 30 3a 30 30  i915@pci:0000:00
    3a 30 32 2e 30 00 6b 6b 6b 6b 6b 6b 6b 6b 6b a5  :02.0.kkkkkkkkk.
  backtrace:
    [<c04e5657>] create_object+0x124/0x1f1
    [<c07cf0f0>] kmemleak_alloc+0x4c/0x90
    [<c04db84c>] __kmalloc+0x155/0x175
    [<f8316665>] drm_setversion+0x11d/0x1b1 [drm]
    [<f83148d4>] drm_ioctl+0x29a/0x356 [drm]
    [<c04f27c4>] vfs_ioctl+0x33/0x91
    [<c04f31cf>] do_vfs_ioctl+0x46b/0x496
    [<c04f3240>] sys_ioctl+0x46/0x66
    [<c040325f>] sysenter_do_call+0x12/0x38
    [<ffffffff>] 0xffffffff
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

/* A typical clean-up sequence for objects stored in an idr tree, will
 * use idr_for_each() to free all objects, if necessary, then
 * idr_remove_all() to remove all ids, and idr_destroy() to free
 * up the cached idr_layers.
 */

We were missing the vital idr_rmove_all() step and so were leaking
the used layers for every dri client:

unreferenced object 0xf32133c0 (size 148):
  comm "plymouthd", pid 131, jiffies 4294678490 (age 2308.030s)
  hex dump (first 32 bytes):
    04 00 00 00 00 00 00 00 00 00 00 00 00 40 19 f3  .............@..
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<c04e5657>] create_object+0x124/0x1f1
    [<c07cf100>] kmemleak_alloc+0x4c/0x90
    [<c04db6a9>] kmem_cache_alloc+0xee/0x13c
    [<c05c3d25>] idr_pre_get+0x24/0x61
    [<f8315c9c>] drm_gem_handle_create+0x27/0x7f [drm]
    [<f89925b2>] i915_gem_create_ioctl+0x4f/0x71 [i915]
    [<f83148ac>] drm_ioctl+0x272/0x356 [drm]
    [<c04f27c4>] vfs_ioctl+0x33/0x91
    [<c04f31cf>] do_vfs_ioctl+0x46b/0x496
    [<c04f3240>] sys_ioctl+0x46/0x66
    [<c040325f>] sysenter_do_call+0x12/0x38
    [<ffffffff>] 0xffffffff

Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15803Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

set_current_state() is called only once before the first iteration.
After return from schedule_timeout() current state is TASK_RUNNING. If
we are going to wait again, set_current_state() must be called.
Signed-off-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Trivial fix to set y1 = y2 = 0.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We aren't using it, so no need.  Save additional dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

group state that is emitted sequentially into fewer packets.
This saves a number of dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Saves lots of dwords in blit emit
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

group state that is emitted sequentially into fewer packets.
This saves a number of dwords.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use of HDP_*_COHERENCY_FLUSH_CNTL can cause a hang in certain
situations.  Add workaround.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We used to limit the rs4xx gart aperture to 32 MB, but I suspect
that was due to not meeting the alignment requirements of the
aperture.  This patch should only be applied after:
"drm/radeon/kms: fix gtt MC base alignment on rs4xx/rs690/rs740 asics"
has been applied.

This patch should probably soak for a bit in d-r-t.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Need this to avoid conflicts with future radeon fixes

The "error" variable is unsigned so it's never less than zero.  I
changed it to check if (freq < current_freq) directly.

"best_error" is also unsigned so "best_error - 100" could be a large
number instead of a negative.  Since "error" is unsigned it is never
less than a negative and so the cases where "best_error" is less than or
equal to 100 are false.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Reviewed-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On systems using kexec, the new kernel is booted straight from the old kernel, without any warning to the graphics driver. So the GPU is basically left as-is in a running state, however the CPU side is completly reset.

Without stating the saneness of anyone using kexec on live systems, we should at least try not to crash the GPU. This patch resets 3 registers to 0 that could cause bad things to happen to the running system.

This allows kexec to work on a Power6/RN50 system.
Signed-off-by: NDave Airlie <airlied@redhat.com>

This fixes a problem where on low VRAM cards we'd run out of space for validation.

[airlied: Tested on my M7, Thinkpad T42, compiz works with no problems.]
Signed-off-by: NMichel Dänzer <daenzer@vmware.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is required for the NB_MISC regs on rs780/rs880 which
means HDMI/DVI/DP ports using PCIEPHY won't work without
it. It might also help with s/r (asic init) issues on other
atombios cards.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=28774
and similar issues reported by Alberto Milone.

[airlied: Squash io fix patch]
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Tested-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We will need method of selecting encoder that should receive HDMI block. For
now we assign HDMI block to first enabled encoder. Hopefully there are not many
RS6x0 chips with two digital encoders.

[airlied: add RS740 checks as per Alex suggestion.]
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This is needed to enable audio support on devices using polling. In case user
decides to disable audio (module parameter) we still will try to use timer in
r600_audio_enable_polling. This would lead to BUG in kernel/timer.c.
Signed-off-by: NRafał Miłecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Userspace needs this information to access tiled
buffers via the CPU.

v2: rebased on evergreen accel changes
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Covers depth, cb, and textures. Hopefully I got this right.

v2: - fix bugs:
      https://bugs.freedesktop.org/show_bug.cgi?id=28327
      https://bugs.freedesktop.org/show_bug.cgi?id=28381
    - use ALIGNED(), IS_ALIGNED() macros
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Check for relocs for DB_DEPTH_INFO, CB_COLOR*_INFO, and texture
resources.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Needed for scanning out of a tiled buffer.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Needed for scanning out of a tiled buffer.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

rv6xx/rv7xx/evergreen families supported; older asics did
not have an internal thermal sensor.

Note, not all oems use the internal thermal sensor, so it's
only exposed in cases where it is used.

Note also, that most laptops use an oem specific ACPI solution for
GPU thermal information rather than using the internal thermal
sensor directly.

v2: export millidegrees celsius, use hwmon device properly.
v3: fix Kconfig
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>