- 22 7月, 2007 40 次提交
-
-
由 Nicolas Ferre 提交于
Fixes STN LCD support for the atmel_lcdfb framebuffer driver. This patch is the result of a work from Jan Altenberg and has been tested on a Hitachi SP06Q002 on at91sam9261ek. It adds a Kconfig switch that enables the proper LCD in the board configuration file (STN or TFT). The switch is used in arch/arm/mach-at91/at91sam9261_devices.c & board-sam9261ek.c as an example. This patch includes the "Fix wrong line_length calculation" little one from Jan and Haavard (submitted earlier). AT91 platform informations are directly submitted trough the at91 maintainer, here : http://article.gmane.org/gmane.linux.kernel/543158Signed-off-by: NNicolas Ferre <nicolas.ferre@rfo.atmel.com> Cc: "Antonino A. Daplas" <adaplas@gmail.com> Cc: Jan Altenberg <jan.altenberg@linutronix.de> Cc: Patrice Vilchez <patrice.vilchez@rfo.atmel.com> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Hommel 提交于
This patch adds support for the Simtek STK17TA8 timekeeping chip. The STK17TA8 is quite similar to the DS1553, but differs in register layout and in various control bits in the registers. I chose to make this a new driver to avoid confusion in the code and to not get lost in #ifdefs. Signed-off-by: NThomas Hommel <thomas.hommel@gefanuc.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dale Farnsworth 提交于
We now read and write the century byte in the max6900 chip. We probably don't need to do so on Linux-only system, but it's necessary when the chip is shared by another OS that uses the century byte. Signed-off-by: NDale Farnsworth <dale@farnsworth.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Brownell 提交于
Various people have expressed surprise that their modular RTC drivers don't seem to work for initializing the system time at boot. To help avoid such unpleasantness, make the Kconfig text point out that the driver probably needs to be statically linked. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Atsushi Nemoto 提交于
This patch fixes these sparse warnings: drivers/rtc/rtc-ds1742.c:265:2: warning: returning void-valued expression drivers/rtc/rtc-ds1553.c:409:2: warning: returning void-valued expression Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: David Brownell <david-b@pacbell.net> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Change Kconfig objects from "menu, config" into "menuconfig" so that the user can disable the whole feature without having to enter the menu first. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Tilman Schmidt <tilman@imap.cc> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Engelhardt 提交于
Unclutter the ISDN menu a tiny bit by moving ISDN4Linux and the CAPI2.0 layers into their own menu. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Cc: Tilman Schmidt <tilman@imap.cc> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tilman Schmidt 提交于
Remove a menu statement and several dependencies from the Kconfig files in the drivers/isdn tree as they have become unnecessary by the transformation of CONFIG_ISDN from "menu, config" into "menuconfig". (Modified version of a patch originally proposed by Jan Engelhardt.) Signed-off-by: NTilman Schmidt <tilman@imap.cc> Cc: Jan Engelhardt <jengelh@computergmbh.de> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
WARNING: drivers/built-in.o(.text+0x889735): Section mismatch: reference to .init.text:scan_boardinfo (between 'spi_register_master' and '__unregister') Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Kerr 提交于
Reading from the signal{1,2} files requires a spu_acquire_saved, so make these files write-only for contexts created with SPU_CREATE_NOSCHED. Signed-off-by: NJeremy Kerr <jk@ozlabs.org> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
ps3fb: Set FBINFO_READS_FAST to speed up text console scrolling (on average 50%, according to my tests) Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
ps3fb: Shrink the default virtual frame buffer size from 18 to 9 MiB, as nobody really uses the double buffering feature and Linux can use an additional 9 MiB. It can still be overridden on the kernel command line using `ps3fb=18M'. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
ps3fb: VT_HW_CONSOLE_BINDING must be enabled to make console unbinding work, which is needed to give up all hypervisor resources before reboot or kexec. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Paul Mackerras <paulus@samba.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geoff Levand 提交于
The PS3 bootwrapper files use instructions only available on 64-bit CPUs. Add the code generation directive '.machine "ppc64"' for toolchains configured for 32-bit CPUs. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Add a FLASH ROM Storage Driver for the PS3: - Implemented as a misc character device driver - Uses a fixed 256 KiB buffer allocated from boot memory as the hypervisor requires the writing of aligned 256 KiB blocks Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Add a BD/DVD/CD-ROM Storage Driver for the PS3: - Implemented as a SCSI device driver - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor doesn't support scatter-gather Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Add a Disk Storage Driver for the PS3: - Implemented as a block device driver with a dynamic major - Disk names (and partitions) are of the format ps3d%c(%u) - Uses software scatter-gather with a 64 KiB bounce buffer as the hypervisor doesn't support scatter-gather Cc: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by: NJens Axboe <jens.axboe@oracle.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mariusz Kozlowski 提交于
allnoconfig results in this: CC arch/powerpc/mm/tlb_32.o In file included from include/asm/tlb.h:60, from arch/powerpc/mm/tlb_32.c:30: include/asm-generic/tlb.h: In function 'tlb_flush_mmu': include/asm-generic/tlb.h:76: error: implicit declaration of function 'release_pages' include/asm-generic/tlb.h: In function 'tlb_remove_page': include/asm-generic/tlb.h:105: error: implicit declaration of function 'page_cache_release' Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oliver Neukum 提交于
freezing-of-tasks.txt mentions firmware issues without mentioning the use of the new notifier API to overcome them. Here's an update. Signed-off-by: NOliver Neukum <oneukum@suse.de> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NNigel Cunningham <nigel@nigel.suspend2.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Matt Mackall 提交于
The version of SLOB in -mm always scans its free list from the beginning, which results in small allocations and free segments clustering at the beginning of the list over time. This causes the average search to scan over a large stretch at the beginning on each allocation. By starting each page search where the last one left off, we evenly distribute the allocations and greatly shorten the average search. Without this patch, kernel compiles on a 1.5G machine take a large amount of system time for list scanning. With this patch, compiles are within a few seconds of performance of a SLAB kernel with no notable change in system time. Signed-off-by: NMatt Mackall <mpm@selenic.com> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Now that arch/powerpc/platforms/cell/spufs/fault.c is always built in the kernel there is no need to export handle_mm_fault anymore. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Adrian Bunk 提交于
WARNING: arch/i386/kernel/built-in.o(.text+0xb6a7): Section mismatch: reference to .init.text:find_num_cache_leaves (between 'init_intel_cacheinfo' and 'cache_shared_cpu_map_setup') It could be __init_refok, but gcc >= 4.0 anyway inlines it into the __cpuinit init_intel_cacheinfo(), and IMHO it's too small for "noinline __init". Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
The patch is necessary on one of my boxen, where programming the stop sequence twice leads to PIT malfunction. Sigh ! Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
i386 and sparc64 have the identical code to update the cmos clock. Move it into kernel/time/ntp.c as there are other architectures coming along with the same requirements. [akpm@linux-foundation.org: build fixes] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: David Miller <davem@davemloft.net> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Speedup hrtimer_enqueue by evaluating the rbtree insertion result. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Add some more debug information to the hrtimer and clock events code. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 john stultz 提交于
After discussing w/ Thomas over IRC, it seems the issue is the sched tick fires on every cpu at the same time, causing extra lock contention. This smaller change, adds an extra offset per cpu so the ticks don't line up. This patch also drops the idle latency from 40us down to under 20us. Signed-off-by: Njohn stultz <johnstul@us.ibm.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
When a device is replaced by a better rated device, then the broadcast mode needs to be evaluated again. When the new device has no requirement for broadcasting, then the broadcast bits for the CPU must be cleared. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
We need to make sure, that the clockevent devices are resumed, before the tick is resumed. The current resume logic does not guarantee this. Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock event devices before resuming the tick / oneshot functionality. Fixup the existing users. Thanks to Nigel Cunningham for tracking down a long standing thinko, which affected the jinxed VAIO. [akpm@linux-foundation.org: xen build fix] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
There are reports of this causing userspace failures (http://lkml.org/lkml/2007/7/20/421). Revert. Cc: Jan Kratochvil <honza@jikos.cz> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Bret Towe" <magnade@gmail.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Fix following section mismatch warning: WARNING: vmlinux.o(.text+0x121e62): Section mismatch: reference to .init.text:__alloc_bootmem (between 'vgacon_startup' and 'vgacon_scrolldelta') Browsing the code it seems that vgacon_scrollback_startup() is only called during the init phase so the reference to the .init.text section is OK. Teach modpost not to warn using ___init_refok. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Acked-by: N"Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 J. Bruce Fields 提交于
For display purposes, treat uid's and gid's as unsigned ints for now. Also fix a typo. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konrad Rzeszutek 提交于
Prevent NMI watchdog triggering during long sysrq-T outputs. Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Milan Broz 提交于
Flush workqueue before releasing bioset and mopools in dm-crypt. There can be finished but not yet released request. Call chain causing oops: run workqueue dec_pending bio_endio(...); <remove device request - remove mempool> mempool_free(io, cc->io_pool); This usually happens when cryptsetup create temporary luks mapping in the beggining of crypt device activation. When dm-core calls destructor crypt_dtr, no new request are possible. Signed-off-by: NMilan Broz <mbroz@redhat.com> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Patrick McHardy <kaber@trash.net> Acked-by: NAlasdair G Kergon <agk@redhat.com> Cc: Christophe Saout <christophe@saout.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Harkes 提交于
This is an variation on the patch sent by Christoph Hellwig which kills file_count abuse by the Coda kernel module by moving the coda_flush functionality into coda_release. However part of reason we were using the coda_flush callback was to allow Coda to pass errors that occur during writeback from the userspace cache manager back to close(). As Al Viro explained on linux-fsdevel, it is impossible to guarantee that such errors can in fact be returned back to the caller. There are many cases where the last reference to a file is not released by the close system call and it is also impossible to pick some close as a 'last-close' and delay it until all other references have been destroyed. The CODA_STORE/CODA_RELEASE upcall combination is clearly a broken design, and it is better to remove it completely. Signed-off-by: NJan Harkes <jaharkes@cs.cmu.edu> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Paul Mundt 提交于
Trying to survive an allmodconfig on a nommu platform results in many screen lengths of module unhappiness. Many of the mmap related things that binfmt_flat hooks in to are never exported despite being global, and there are also missing definitions for vmalloc_32_user() and vm_insert_page(). I've implemented vmalloc_32_user() trying to stick as close to the mm/vmalloc.c implementation as possible, though we don't have any need for VM_USERMAP, so groveling for the VMA can be skipped. vm_insert_page() has been stubbed for now in order to keep the build happy. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Keir Fraser 提交于
If the swiotlb maps a multi-slab region, swiotlb_sync_single_range() can be invoked to sync a sub-region which does not include the first slab. Unfortunately io_tlb_orig_addr[] is only initialised for the first slab, and hence the call to sync_single() will read a garbage orig_addr in this case. This patch fixes the issue by initialising all mapped slabs in io_tlb_orig_addr[]. It also correctly adjusts the buffer pointer in sync_single() to handle the case that the given dma_addr is not aligned on a slab boundary. Signed-off-by: NKeir Fraser <keir.fraser@cl.cam.ac.uk> Cc: "Luck, Tony" <tony.luck@intel.com> Acked-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Cyrill Gorcunov 提交于
This patch fixes up sources after conversion by Lindent. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: Jan Kara <jack@ucw.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nick Piggin 提交于
Too many semicolons in this macro. Signed-off-by: NNick Piggin <npiggin@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-