- 30 1月, 2008 7 次提交
-
-
由 Ingo Molnar 提交于
fix more __flush_tlb() instances, out of caution. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andi Kleen 提交于
On x86-64 there are several memory allocations before bootmem. To avoid them stomping on each other they used to be all hard coded in bad_area(). Replace this with an array that is filled as needed. This cleans up the code considerably and allows to expand its use. Cc: peterz@infradead.org Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Enable CONFIG_EMBEDDED to select CONFIG_EARLY_PRINTK on 64-bit as well. saves ~2K: text data bss dec hex filename 7290283 3672091 1907848 12870222 c4624e vmlinux.before 7288373 3671795 1907848 12868016 c459b0 vmlinux.after Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Roland McGrath 提交于
It's not too pretty, but I found this made the "PANIC: early exception" messages become much more reliably useful: 1. print the vector number, 2. print the %cs value, 3. handle error-code-pushing vs non-pushing vectors. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
In init/main.c boot_cpu_init() does that later. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
start_kernel is already declared in a generic header file. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Move them and fixup some users. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 10月, 2007 1 次提交
-
-
This patch provides a new set of functions for managing the descriptor tables that can be used instead of putting the raw assembly in .c files. Remodeling of store_tr() suggested by Frederik Deweerdt. [ tglx: arch/x86 adaptation ] Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 10月, 2007 1 次提交
-
-
由 H. Peter Anvin 提交于
Instead of using magic macros for boot_params access, simply use the boot_params structure. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 14 10月, 2007 1 次提交
-
-
由 Dave Jones 提交于
Since the x86 merge, lots of files that referenced their own filenames are no longer correct. Rather than keep them up to date, just delete them, as they add no real value. Additionally: - fix up comment formatting in scx200_32.c - Remove a credit from myself in setup_64.c from a time when we had no SCM - remove longwinded history from tsc_32.c which can be figured out from git. Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 5月, 2007 1 次提交
-
-
由 Vivek Goyal 提交于
o x86_64 kernel needs to be compiled for 2MB aligned addresses. Currently we are using BUILD_BUG_ON() to warn the user if he has not done so. But looks like folks are not finding message very intutive and don't open the respective c file to find problem source. (Bug 8439) arch/x86_64/kernel/head64.c: In function 'x86_64_start_kernel': arch/x86_64/kernel/head64.c:70: error: size of array 'type name' is negative o Using preprocessor directive #error to print a better message if CONFIG_PHYSICAL_START is not aligned to 2MB boundary. Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Cc: Andi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 3 次提交
-
-
由 Vivek Goyal 提交于
o X86_64 kernel should run from 2MB aligned address for two reasons. - Performance. - For relocatable kernels, page tables are updated based on difference between compile time address and load time physical address. This difference should be multiple of 2MB as kernel text and data is mapped using 2MB pages and PMD should be pointing to a 2MB aligned address. Life is simpler if both compile time and load time kernel addresses are 2MB aligned. o Flag the error at compile time if one is trying to build a kernel which does not meet alignment restrictions. Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Vivek Goyal 提交于
With the rewrite of the SMP trampoline and the early page allocator there is nothing that needs identity mapped pages, once we start executing C code. So add zap_identity_mappings into head64.c and remove zap_low_mappings() from much later in the code. The functions are subtly different thus the name change. This also kills boot_level4_pgt which was from an earlier attempt to move the identity mappings as early as possible, and is now no longer needed. Essentially I have replaced boot_level4_pgt with trampoline_level4_pgt in trampoline.S Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
Use virtual addresses instead of physical addresses in copy bootdata. In addition fix the implementation of the old bootloader convention. Everything is at real_mode_data always. It is just that sometimes real_mode_data was relocated by setup.S to not sit at 0x90000. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 13 2月, 2007 2 次提交
-
-
由 Alon Bar-Lev 提交于
Remove in-source externs, linux/init.h is included in all cases. This is a fixups for "Dynamic kernel command-line" patch. It also includes some uml __init fixups so that we can __initdata also its command_line. Signed-off-by: NAlon Bar-Lev <alon.barlev@gmail.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alon Bar-Lev 提交于
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: NAlon Bar-Lev <alon.barlev@gmail.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 12月, 2006 1 次提交
-
-
由 Yinghai Lu 提交于
idt_table is in the .bss section, so clear_bss need to called at first Signed-off-by: NYinghai Lu <yinghai.lu@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 26 9月, 2006 4 次提交
-
-
由 Andi Kleen 提交于
I think it was only needed for the printks and we can do them later. I put in a single early_printk so that we know the kernel is alive (early_printk doesn't need any locks) This makes some things easier for initialization of unwind for lockdep, which is needed by later patches. cc: mingo@elte.hu Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Instead of hackish manual parsing Requires earlier i386 patchkit, but also fixes i386 early_printk again. I removed some obsolete really early parameters which didn't do anything useful. Also made a few parameters that needed it early (mostly oops printing setup) Also removed one panic check that wasn't visible without early console anyways (the early console is now initialized after that panic) This cleans up a lot of code. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
This makes it possible to modify CPU flags in command line options without hacks. And remove another copy in head64.c Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
IO-APIC or local APIC can only be disabled at runtime anyways and Kconfig has forced these options on for a long time now. The Kconfigs are kept only now for the benefit of the shared acpi boot.c code. Signed-off-by: NAndi Kleen <ak@suse.de>
-
- 04 7月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
x86_64 uses spinlocks very early - earlier than start_kernel(). So call lockdep_init() from the arch setup code. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
Early development of x86-64 Linux was in CVS, but that hasn't been the case for a long time now. Remove the obsolete $Id$s. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 1月, 2006 2 次提交
-
-
由 Jan Beulich 提交于
The explicit and implicit calls to setup_early_printk() were passing inconsistent arguments. Signed-Off-By: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ravikiran G Thirumalai 提交于
Patch uses a static PDA array early at boot and reallocates processor PDA with node local memory when kmalloc is ready, just before pda_init. The boot_cpu_pda is needed since the cpu_pda is used even before pda_init for that cpu is called (to set the static per-cpu areas offset table etc) Signed-off-by: NRavikiran Thirumalai <kiran@scalex86.org> Signed-off-by: NShai Fultheim <shai@scalex86.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 11月, 2005 2 次提交
-
-
由 Andi Kleen 提交于
Adding __initdata_* to asm-generic/sections.h Replaces a lot of open coded externs in arch/x86_64/* I had to change __bss_end to __bss_stop to match the other architectures. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Siddha, Suresh B 提交于
We should zap the low mappings, as soon as possible, so that we can catch kernel bugs more effectively. Previously early boot had NULL mapped and didn't trap on NULL references. This patch introduces boot_level4_pgt, which will always have low identity addresses mapped. Druing boot, all the processors will use this as their level4 pgt. On BP, we will switch to init_level4_pgt as soon as we enter C code and zap the low mappings as soon as we are done with the usage of identity low mapped addresses. On AP's we will zap the low mappings as soon as we jump to C code. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NAshok Raj <ashok.raj@intel.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 1 次提交
-
-
由 Matt Tolentino 提交于
In order to use the alternative sparsemem implmentation for NUMA kernels, we need to reorganize the config options. This patch effectively abstracts out the CONFIG_DISCONTIGMEM options to CONFIG_NUMA in most cases. Thus, the discontigmem implementation may be employed as always, but the sparsemem implementation may be used alternatively. Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com> Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 2 次提交
-
-
由 Alexander Nyberg 提交于
This strcpy can run off the end of saved_command_line, and we don't need it any more anyway. Signed-off-by: NAlexander Nyberg <alexn@telia.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Venkatesh Pallipadi 提交于
The specifications that talk about E820 map doesn't have an upper limit on the number of e820 entries. But, today's kernel has a hard limit of 32. With increase in memory size, we are seeing the number of E820 entries reaching close to 32. Patch below bumps the number upto 128. The patch changes the location of EDDBUF in zero-page (as it comes after E820). As, EDDBUF is not used by boot loaders, this patch should not have any effect on bootloader-setup code interface. Patch covers both i386 and x86-64. Tested on: * grub booting bzImage * lilo booting bzImage with EDID info enabled * pxeboot of bzImage Side-effect: bss increases by ~ 2K and init.data increases by ~7.5K on all systems, due to increase in size of static arrays. Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-