Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 29 9月, 2014 1 次提交
  3. 27 9月, 2014 11 次提交
    • L
      net: optimise csum_replace4() · 4565af0d
      由 LEROY Christophe 提交于 
      csum_partial() is a generic function which is not optimised for small fixed
length calculations, and its use requires to store "from" and "to" values in
memory while we already have them available in registers. This also has impact,
especially on RISC processors. In the same spirit as the change done by
Eric Dumazet on csum_replace2(), this patch rewrites inet_proto_csum_replace4()
taking into account RFC1624.

I spotted during a NATted tcp transfert that csum_partial() is one of top 5
consuming functions (around 8%), and the second user of csum_partial() is
inet_proto_csum_replace4().

I have proposed the same modification to inet_proto_csum_replace4() in another
patch.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4565af0d
    • E
      net: introduce __skb_header_release() · f4a775d1
      由 Eric Dumazet 提交于 
      While profiling TCP stack, I noticed one useless atomic operation
in tcp_sendmsg(), caused by skb_header_release().

It turns out all current skb_header_release() users have a fresh skb,
that no other user can see, so we can avoid one atomic operation.

Introduce __skb_header_release() to clearly document this.

This gave me a 1.5 % improvement on TCP_RR workload.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      f4a775d1
    • J
      net: Change netdev_<level> logging functions to return void · 6ea754eb
      由 Joe Perches 提交于 
      No caller or macro uses the return value so make all
the functions return void.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      6ea754eb
    • A
      bpf: verifier (add verifier core) · 17a52670
      由 Alexei Starovoitov 提交于 
      This patch adds verifier core which simulates execution of every insn and
records the state of registers and program stack. Every branch instruction seen
during simulation is pushed into state stack. When verifier reaches BPF_EXIT,
it pops the state from the stack and continues until it reaches BPF_EXIT again.
For program:
1: bpf_mov r1, xxx
2: if (r1 == 0) goto 5
3: bpf_mov r0, 1
4: goto 6
5: bpf_mov r0, 2
6: bpf_exit
The verifier will walk insns: 1, 2, 3, 4, 6
then it will pop the state recorded at insn#2 and will continue: 5, 6

This way it walks all possible paths through the program and checks all
possible values of registers. While doing so, it checks for:
- invalid instructions
- uninitialized register access
- uninitialized stack access
- misaligned stack access
- out of range stack access
- invalid calling convention
- instruction encoding is not using reserved fields

Kernel subsystem configures the verifier with two callbacks:

- bool (*is_valid_access)(int off, int size, enum bpf_access_type type);
  that provides information to the verifer which fields of 'ctx'
  are accessible (remember 'ctx' is the first argument to eBPF program)

- const struct bpf_func_proto *(*get_func_proto)(enum bpf_func_id func_id);
  returns argument constraints of kernel helper functions that eBPF program
  may call, so that verifier can checks that R1-R5 types match the prototype

More details in Documentation/networking/filter.txt and in kernel/bpf/verifier.c
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      17a52670
    • A
      bpf: handle pseudo BPF_LD_IMM64 insn · 0246e64d
      由 Alexei Starovoitov 提交于 
      eBPF programs passed from userspace are using pseudo BPF_LD_IMM64 instructions
to refer to process-local map_fd. Scan the program for such instructions and
if FDs are valid, convert them to 'struct bpf_map' pointers which will be used
by verifier to check access to maps in bpf_map_lookup/update() calls.
If program passes verifier, convert pseudo BPF_LD_IMM64 into generic by dropping
BPF_PSEUDO_MAP_FD flag.

Note that eBPF interpreter is generic and knows nothing about pseudo insns.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0246e64d
    • A
      bpf: verifier (add ability to receive verification log) · cbd35700
      由 Alexei Starovoitov 提交于 
      add optional attributes for BPF_PROG_LOAD syscall:
union bpf_attr {
    struct {
	...
	__u32         log_level; /* verbosity level of eBPF verifier */
	__u32         log_size;  /* size of user buffer */
	__aligned_u64 log_buf;   /* user supplied 'char *buffer' */
    };
};

when log_level > 0 the verifier will return its verification log in the user
supplied buffer 'log_buf' which can be used by program author to analyze why
verifier rejected given program.

'Understanding eBPF verifier messages' section of Documentation/networking/filter.txt
provides several examples of these messages, like the program:

  BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
  BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
  BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
  BPF_LD_MAP_FD(BPF_REG_1, 0),
  BPF_CALL_FUNC(BPF_FUNC_map_lookup_elem),
  BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
  BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0),
  BPF_EXIT_INSN(),

will be rejected with the following multi-line message in log_buf:

  0: (7a) *(u64 *)(r10 -8) = 0
  1: (bf) r2 = r10
  2: (07) r2 += -8
  3: (b7) r1 = 0
  4: (85) call 1
  5: (15) if r0 == 0x0 goto pc+1
   R0=map_ptr R10=fp
  6: (7a) *(u64 *)(r0 +4) = 0
  misaligned access off 4 size 8

The format of the output can change at any time as verifier evolves.
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cbd35700
    • A
      bpf: verifier (add docs) · 51580e79
      由 Alexei Starovoitov 提交于 
      this patch adds all of eBPF verfier documentation and empty bpf_check()

The end goal for the verifier is to statically check safety of the program.

Verifier will catch:
- loops
- out of range jumps
- unreachable instructions
- invalid instructions
- uninitialized register access
- uninitialized stack access
- misaligned stack access
- out of range stack access
- invalid calling convention

More details in Documentation/networking/filter.txt
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      51580e79
    • A
      bpf: expand BPF syscall with program load/unload · 09756af4
      由 Alexei Starovoitov 提交于 
      eBPF programs are similar to kernel modules. They are loaded by the user
process and automatically unloaded when process exits. Each eBPF program is
a safe run-to-completion set of instructions. eBPF verifier statically
determines that the program terminates and is safe to execute.

The following syscall wrapper can be used to load the program:
int bpf_prog_load(enum bpf_prog_type prog_type,
                  const struct bpf_insn *insns, int insn_cnt,
                  const char *license)
{
    union bpf_attr attr = {
        .prog_type = prog_type,
        .insns = ptr_to_u64(insns),
        .insn_cnt = insn_cnt,
        .license = ptr_to_u64(license),
    };

    return bpf(BPF_PROG_LOAD, &attr, sizeof(attr));
}
where 'insns' is an array of eBPF instructions and 'license' is a string
that must be GPL compatible to call helper functions marked gpl_only

Upon succesful load the syscall returns prog_fd.
Use close(prog_fd) to unload the program.

User space tests and examples follow in the later patches
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      09756af4
    • A
      bpf: add lookup/update/delete/iterate methods to BPF maps · db20fd2b
      由 Alexei Starovoitov 提交于 
      'maps' is a generic storage of different types for sharing data between kernel
and userspace.

The maps are accessed from user space via BPF syscall, which has commands:

- create a map with given type and attributes
  fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size)
  returns fd or negative error

- lookup key in a given map referenced by fd
  err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)
  using attr->map_fd, attr->key, attr->value
  returns zero and stores found elem into value or negative error

- create or update key/value pair in a given map
  err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)
  using attr->map_fd, attr->key, attr->value
  returns zero or negative error

- find and delete element by key in a given map
  err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)
  using attr->map_fd, attr->key

- iterate map elements (based on input key return next_key)
  err = bpf(BPF_MAP_GET_NEXT_KEY, union bpf_attr *attr, u32 size)
  using attr->map_fd, attr->key, attr->next_key

- close(fd) deletes the map
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      db20fd2b
    • A
      bpf: enable bpf syscall on x64 and i386 · 749730ce
      由 Alexei Starovoitov 提交于 
      done as separate commit to ease conflict resolution
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      749730ce
    • A
      bpf: introduce BPF syscall and maps · 99c55f7d
      由 Alexei Starovoitov 提交于 
      BPF syscall is a multiplexor for a range of different operations on eBPF.
This patch introduces syscall with single command to create a map.
Next patch adds commands to access maps.

'maps' is a generic storage of different types for sharing data between kernel
and userspace.

Userspace example:
/* this syscall wrapper creates a map with given type and attributes
 * and returns map_fd on success.
 * use close(map_fd) to delete the map
 */
int bpf_create_map(enum bpf_map_type map_type, int key_size,
                   int value_size, int max_entries)
{
    union bpf_attr attr = {
        .map_type = map_type,
        .key_size = key_size,
        .value_size = value_size,
        .max_entries = max_entries
    };

    return bpf(BPF_MAP_CREATE, &attr, sizeof(attr));
}

'union bpf_attr' is backwards compatible with future extensions.

More details in Documentation/networking/filter.txt and in manpage
Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      99c55f7d
  5. 26 9月, 2014 1 次提交
  7. 24 9月, 2014 3 次提交
    • T
      blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe · 0a30288d
      由 Tejun Heo 提交于 
      blk-mq uses percpu_ref for its usage counter which tracks the number
of in-flight commands and used to synchronously drain the queue on
freeze.  percpu_ref shutdown takes measureable wallclock time as it
involves a sched RCU grace period.  This means that draining a blk-mq
takes measureable wallclock time.  One would think that this shouldn't
matter as queue shutdown should be a rare event which takes place
asynchronously w.r.t. userland.

Unfortunately, SCSI probing involves synchronously setting up and then
tearing down a lot of request_queues back-to-back for non-existent
LUNs.  This means that SCSI probing may take more than ten seconds
when scsi-mq is used.

This will be properly fixed by implementing a mechanism to keep
q->mq_usage_counter in atomic mode till genhd registration; however,
that involves rather big updates to percpu_ref which is difficult to
apply late in the devel cycle (v3.17-rc6 at the moment).  As a
stop-gap measure till the proper fix can be implemented in the next
cycle, this patch introduces __percpu_ref_kill_expedited() and makes
blk_mq_freeze_queue() use it.  This is heavy-handed but should work
for testing the experimental SCSI blk-mq implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NChristoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de
Fixes: add703fd ("blk-mq: use percpu_ref for mq usage count")
Cc: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Tested-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>
      0a30288d
    • T
      crypto: ccp - Check for CCP before registering crypto algs · c9f21cb6
      由 Tom Lendacky 提交于 
      If the ccp is built as a built-in module, then ccp-crypto (whether
built as a module or a built-in module) will be able to load and
it will register its crypto algorithms.  If the system does not have
a CCP this will result in -ENODEV being returned whenever a command
is attempted to be queued by the registered crypto algorithms.

Add an API, ccp_present(), that checks for the presence of a CCP
on the system.  The ccp-crypto module can use this to determine if it
should register it's crypto alogorithms.

Cc: stable@vger.kernel.org
Reported-by: NScot Doyle <lkml14@scotdoyle.com>
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Tested-by: NScot Doyle <lkml14@scotdoyle.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
      c9f21cb6
    • E
      icmp: add a global rate limitation · 4cdf507d
      由 Eric Dumazet 提交于 
      Current ICMP rate limiting uses inetpeer cache, which is an RBL tree
protected by a lock, meaning that hosts can be stuck hard if all cpus
want to check ICMP limits.

When say a DNS or NTP server process is restarted, inetpeer tree grows
quick and machine comes to its knees.

iptables can not help because the bottleneck happens before ICMP
messages are even cooked and sent.

This patch adds a new global limitation, using a token bucket filter,
controlled by two new sysctl :

icmp_msgs_per_sec - INTEGER
    Limit maximal number of ICMP packets sent per second from this host.
    Only messages whose type matches icmp_ratemask are
    controlled by this limit.
    Default: 1000

icmp_msgs_burst - INTEGER
    icmp_msgs_per_sec controls number of ICMP packets sent per second,
    while icmp_msgs_burst controls the burst size of these packets.
    Default: 50

Note that if we really want to send millions of ICMP messages per
second, we might extend idea and infra added in commit 04ca6973
("ip: make IP identifiers less predictable") :
add a token bucket in the ip_idents hash and no longer rely on inetpeer.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4cdf507d
  9. 23 9月, 2014 5 次提交
    • E
      tcp: avoid possible arithmetic overflows · fcdd1cf4
      由 Eric Dumazet 提交于 
      icsk_rto is a 32bit field, and icsk_backoff can reach 15 by default,
or more if some sysctl (eg tcp_retries2) are changed.

Better use 64bit to perform icsk_rto << icsk_backoff operations

As Joe Perches suggested, add a helper for this.

Yuchung spotted the tcp_v4_err() case.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fcdd1cf4
    • D
      ipv6: mld: answer mldv2 queries with mldv1 reports in mldv1 fallback · 35f7aa53
      由 Daniel Borkmann 提交于 
      RFC2710 (MLDv1), section 3.7. says:

  The length of a received MLD message is computed by taking the
  IPv6 Payload Length value and subtracting the length of any IPv6
  extension headers present between the IPv6 header and the MLD
  message. If that length is greater than 24 octets, that indicates
  that there are other fields present *beyond* the fields described
  above, perhaps belonging to a *future backwards-compatible* version
  of MLD. An implementation of the version of MLD specified in this
  document *MUST NOT* send an MLD message longer than 24 octets and
  MUST ignore anything past the first 24 octets of a received MLD
  message.

RFC3810 (MLDv2), section 8.2.1. states for *listeners* regarding
presence of MLDv1 routers:

  In order to be compatible with MLDv1 routers, MLDv2 hosts MUST
  operate in version 1 compatibility mode. [...] When Host
  Compatibility Mode is MLDv2, a host acts using the MLDv2 protocol
  on that interface. When Host Compatibility Mode is MLDv1, a host
  acts in MLDv1 compatibility mode, using *only* the MLDv1 protocol,
  on that interface. [...]

While section 8.3.1. specifies *router* behaviour regarding presence
of MLDv1 routers:

  MLDv2 routers may be placed on a network where there is at least
  one MLDv1 router. The following requirements apply:

  If an MLDv1 router is present on the link, the Querier MUST use
  the *lowest* version of MLD present on the network. This must be
  administratively assured. Routers that desire to be compatible
  with MLDv1 MUST have a configuration option to act in MLDv1 mode;
  if an MLDv1 router is present on the link, the system administrator
  must explicitly configure all MLDv2 routers to act in MLDv1 mode.
  When in MLDv1 mode, the Querier MUST send periodic General Queries
  truncated at the Multicast Address field (i.e., 24 bytes long),
  and SHOULD also warn about receiving an MLDv2 Query (such warnings
  must be rate-limited). The Querier MUST also fill in the Maximum
  Response Delay in the Maximum Response Code field, i.e., the
  exponential algorithm described in section 5.1.3. is not used. [...]

That means that we should not get queries from different versions of
MLD. When there's a MLDv1 router present, MLDv2 enforces truncation
and MRC == MRD (both fields are overlapping within the 24 octet range).

Section 8.3.2. specifies behaviour in the presence of MLDv1 multicast
address *listeners*:

  MLDv2 routers may be placed on a network where there are hosts
  that have not yet been upgraded to MLDv2. In order to be compatible
  with MLDv1 hosts, MLDv2 routers MUST operate in version 1 compatibility
  mode. MLDv2 routers keep a compatibility mode per multicast address
  record. The compatibility mode of a multicast address is determined
  from the Multicast Address Compatibility Mode variable, which can be
  in one of the two following states: MLDv1 or MLDv2.

  The Multicast Address Compatibility Mode of a multicast address
  record is set to MLDv1 whenever an MLDv1 Multicast Listener Report is
  *received* for that multicast address. At the same time, the Older
  Version Host Present timer for the multicast address is set to Older
  Version Host Present Timeout seconds. The timer is re-set whenever a
  new MLDv1 Report is received for that multicast address. If the Older
  Version Host Present timer expires, the router switches back to
  Multicast Address Compatibility Mode of MLDv2 for that multicast
  address. [...]

That means, what can happen is the following scenario, that hosts can
act in MLDv1 compatibility mode when they previously have received an
MLDv1 query (or, simply operate in MLDv1 mode-only); and at the same
time, an MLDv2 router could start up and transmits MLDv2 startup query
messages while being unaware of the current operational mode.

Given RFC2710, section 3.7 we would need to answer to that with an MLDv1
listener report, so that the router according to RFC3810, section 8.3.2.
would receive that and internally switch to MLDv1 compatibility as well.

Right now, I believe since the initial implementation of MLDv2, Linux
hosts would just silently drop such MLDv2 queries instead of replying
with an MLDv1 listener report, which would prevent a MLDv2 router going
into fallback mode (until it receives other MLDv1 queries).

Since the mapping of MRC to MRD in exactly such cases can make use of
the exponential algorithm from 5.1.3, we cannot [strictly speaking] be
aware in MLDv1 of the encoding in MRC, it seems also not mentioned by
the RFC. Since encodings are the same up to 32767, assume in such a
situation this value as a hard upper limit we would clamp. We have asked
one of the RFC authors on that regard, and he mentioned that there seem
not to be any implementations that make use of that exponential algorithm
on startup messages. In any case, this patch fixes this MLD
interoperability issue.
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      35f7aa53
    • F
      net: dsa: add {get, set}_wol callbacks to slave devices · 19e57c4e
      由 Florian Fainelli 提交于 
      Allow switch drivers to implement per-port Wake-on-LAN getter and
setters.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      19e57c4e
    • F
      net: dsa: allow switch drivers to implement suspend/resume hooks · 24462549
      由 Florian Fainelli 提交于 
      Add an abstraction layer to suspend/resume switch devices, doing the
following split:

- suspend/resume the slave network devices and their corresponding PHY
  devices
- suspend/resume the switch hardware using switch driver callbacks
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      24462549
    • E
      net: sched: shrink struct qdisc_skb_cb to 28 bytes · 25711786
      由 Eric Dumazet 提交于 
      We cannot make struct qdisc_skb_cb bigger without impacting IPoIB,
or increasing skb->cb[] size.

Commit e0f31d84 ("flow_keys: Record IP layer protocol in
skb_flow_dissect()") broke IPoIB.

Only current offender is sch_choke, and this one do not need an
absolutely precise flow key.

If we store 17 bytes of flow key, its more than enough. (Its the actual
size of flow_keys if it was a packed structure, but we might add new
fields at the end of it later)
Signed-off-by: NEric Dumazet <edumazet@google.com>
Fixes: e0f31d84 ("flow_keys: Record IP layer protocol in skb_flow_dissect()")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      25711786
  11. 22 9月, 2014 2 次提交
  13. 20 9月, 2014 14 次提交
  15. 19 9月, 2014 2 次提交
  17. 17 9月, 2014 1 次提交