- 06 3月, 2010 1 次提交
-
-
由 Zhu Yi 提交于
We got system OOM while running some UDP netperf testing on the loopback device. The case is multiple senders sent stream UDP packets to a single receiver via loopback on local host. Of course, the receiver is not able to handle all the packets in time. But we surprisingly found that these packets were not discarded due to the receiver's sk->sk_rcvbuf limit. Instead, they are kept queuing to sk->sk_backlog and finally ate up all the memory. We believe this is a secure hole that a none privileged user can crash the system. The root cause for this problem is, when the receiver is doing __release_sock() (i.e. after userspace recv, kernel udp_recvmsg -> skb_free_datagram_locked -> release_sock), it moves skbs from backlog to sk_receive_queue with the softirq enabled. In the above case, multiple busy senders will almost make it an endless loop. The skbs in the backlog end up eat all the system memory. The issue is not only for UDP. Any protocols using socket backlog is potentially affected. The patch adds limit for socket backlog so that the backlog size cannot be expanded endlessly. Reported-by: NAlex Shi <alex.shi@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi> Cc: Patrick McHardy <kaber@trash.net> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2010 1 次提交
-
-
由 Paul E. McKenney 提交于
Update rcu_dereference() primitives to use new lockdep-based checking. The rcu_dereference() in __in6_dev_get() may be protected either by rcu_read_lock() or RTNL, per Eric Dumazet. The rcu_dereference() in __sk_free() is protected by the fact that it is never reached if an update could change it. Check for this by using rcu_dereference_check() to verify that the struct sock's ->sk_wmem_alloc counter is zero. Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com LKML-Reference: <1266887105-1528-5-git-send-email-paulmck@linux.vnet.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 18 2月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
kasprintf() makes code smaller. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
__net_init/__net_exit are apparently not going away, so use them to full extent. In some cases __net_init was removed, because it was called from __net_exit code. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2010 1 次提交
-
-
由 H Hartley Sweeten 提交于
In sock_getsockopt the symbol 'lv' is declared as an unsigned int type, probably due to sizeof returning a size_t which is really an unsigned int. This produces a sparse warning for SO_PEERNAME due to the sock->ops->getname() call: warning: incorrect type in argument 3 (different signedness) expected int *sockaddr_len got unsigned int *<noident> Quiet the warning by changing the type of 'lv' to an int. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2010 1 次提交
-
-
由 Octavian Purdila 提交于
This fixes a netstamp_needed accounting issue when the listen socket has SO_TIMESTAMP set: s = socket(AF_INET, SOCK_STREAM, 0); setsockopt(s, SOL_SOCKET, SO_TIMESTAMP, 1); -> netstamp_needed = 1 bind(s, ...); listen(s, ...); s2 = accept(s, ...); -> netstamp_needed = 1 close(s2); -> netstamp_needed = 0 close(s); -> netstamp_needed = -1 Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 11月, 2009 2 次提交
-
-
由 David S. Miller 提交于
net/core/sock.c: In function 'sock_setsockopt': net/core/sock.c:396: warning: 'index' may be used uninitialized in this function net/core/sock.c:396: note: 'index' was declared here GCC can't see that all paths initialize index, so just set it to the default (0) and eliminate the specific code block that handles the null device name string. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Avoid dev_hold()/dev_put() in sock_bindtodevice() Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2009 2 次提交
-
-
由 Krishna Kumar 提交于
dst_negative_advice() should check for changed dst and reset sk_tx_queue_mapping accordingly. Pass sock to the callers of dst_negative_advice. (sk_reset_txq is defined just for use by dst_negative_advice. The only way I could find to get around this is to move dst_negative_() from dst.h to dst.c, include sock.h in dst.c, etc) Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Krishna Kumar 提交于
Introduce sk_tx_queue_mapping; and functions that set, test and get this value. Reset sk_tx_queue_mapping to -1 whenever the dst cache is set/reset, and in socket alloc. Setting txq to -1 and using valid txq=<0 to n-1> allows the tx path to use the value of sk_tx_queue_mapping directly instead of subtracting 1 on every tx. Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
sock_queue_rcv_skb() can update sk_drops itself, removing need for callers to take care of it. This is more consistent since sock_queue_rcv_skb() also reads sk_drops when queueing a skb. This adds sk_drops managment to many protocols that not cared yet. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2009 1 次提交
-
-
由 Neil Horman 提交于
Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 97775007 (my af packet cmsg patch) is reverted Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2009 2 次提交
-
-
由 Eric Dumazet 提交于
Commit 2b85a34e (net: No more expensive sock_hold()/sock_put() on each tx) opens a window in sock_wfree() where another cpu might free the socket we are working on. A fix is to call sk->sk_write_space(sk) while still holding a reference on sk. Reported-by: NJike Song <albcamus@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2009 1 次提交
-
-
由 Jan Beulich 提交于
Sizing of memory allocations shouldn't depend on the number of physical pages found in a system, as that generally includes (perhaps a huge amount of) non-RAM pages. The amount of what actually is usable as storage should instead be used as a basis here. Some of the calculations (i.e. those not intending to use high memory) should likely even use (totalram_pages - totalhigh_pages). Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Dave Airlie <airlied@linux.ie> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: "David S. Miller" <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 9月, 2009 1 次提交
-
-
由 Jarek Poplawski 提交于
After commit 2b85a34e (net: No more expensive sock_hold()/sock_put() on each tx) sk_free() frees socks conditionally and depends on sk_wmem_alloc being set e.g. in sock_init_data(). But in some cases sk_free() is called earlier, usually after other alloc errors. Fix is to move sk_wmem_alloc initialization from sock_init_data() to sk_alloc() itself. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 8月, 2009 3 次提交
-
-
由 Jan Engelhardt 提交于
This sockopt goes in line with SO_TYPE and SO_PROTOCOL. It makes it possible for userspace programs to pass around file descriptors — I am referring to arguments-to-functions, but it may even work for the fd passing over UNIX sockets — without needing to also pass the auxiliary information (PF_INET6/IPPROTO_TCP). Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Similar to SO_TYPE returning the socket type, SO_PROTOCOL allows to retrieve the protocol used with a given socket. I am not quite sure why we have that-many copies of socket.h, and why the values are not the same on all arches either, but for where hex numbers dominate, I use 0x1029 for SO_PROTOCOL as that seems to be the next free unused number across a bunch of operating systems, or so Google results make me want to believe. SO_PROTOCOL for others just uses the next free Linux number, 38. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
String literals are constant, and usually, we can also tag the array of pointers const too, moving it to the .rodata section. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2009 1 次提交
-
-
由 Rémi Denis-Courmont 提交于
I guess it should be -EINVAL rather than EINVAL. I have not checked when the bug came in. Perhaps a candidate for -stable? Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 7月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Commit e912b114 (net: sk_prot_alloc() should not blindly overwrite memory) took care of not zeroing whole new socket at allocation time. sock_copy() is another spot where we should be very careful. We should not set refcnt to a non null value, until we are sure other fields are correctly setup, or a lockless reader could catch this socket by mistake, while not fully (re)initialized. This patch puts sk_node & sk_refcnt to the very beginning of struct sock to ease sock_copy() & sk_prot_alloc() job. We add appropriate smp_wmb() before sk_refcnt initializations to match our RCU requirements (changes to sock keys should be committed to memory before sk_refcnt setting) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Some sockets use SLAB_DESTROY_BY_RCU, and our RCU code correctness depends on sk->sk_nulls_node.next being always valid. A NULL value is not allowed as it might fault a lockless reader. Current sk_prot_alloc() implementation doesnt respect this hypothesis, calling kmem_cache_alloc() with __GFP_ZERO. Just call memset() around the forbidden field. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2009 1 次提交
-
-
由 Jiri Olsa 提交于
Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 6月, 2009 1 次提交
-
-
由 Vegard Nossum 提交于
2009/2/24 Ingo Molnar <mingo@elte.hu>: > ok, this is the last warning i have from today's overnight -tip > testruns - a 32-bit system warning in sock_init_data(): > > [ 2.610389] NET: Registered protocol family 16 > [ 2.616138] initcall netlink_proto_init+0x0/0x170 returned 0 after 7812 usecs > [ 2.620010] WARNING: kmemcheck: Caught 32-bit read from uninitialized memory (f642c184) > [ 2.624002] 010000000200000000000000604990c000000000000000000000000000000000 > [ 2.634076] i i i i i i u u i i i i i i i i i i i i i i i i i i i i i i i i > [ 2.641038] ^ > [ 2.643376] > [ 2.644004] Pid: 1, comm: swapper Not tainted (2.6.29-rc6-tip-01751-g4d1c22c-dirty #885) > [ 2.648003] EIP: 0060:[<c07141a1>] EFLAGS: 00010282 CPU: 0 > [ 2.652008] EIP is at sock_init_data+0xa1/0x190 > [ 2.656003] EAX: 0001a800 EBX: f6836c00 ECX: 00463000 EDX: c0e46fe0 > [ 2.660003] ESI: f642c180 EDI: c0b83088 EBP: f6863ed8 ESP: c0c412ec > [ 2.664003] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 > [ 2.668003] CR0: 8005003b CR2: f682c400 CR3: 00b91000 CR4: 000006f0 > [ 2.672003] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 > [ 2.676003] DR6: ffff4ff0 DR7: 00000400 > [ 2.680002] [<c07423e5>] __netlink_create+0x35/0xa0 > [ 2.684002] [<c07443cc>] netlink_kernel_create+0x4c/0x140 > [ 2.688002] [<c072755e>] rtnetlink_net_init+0x1e/0x40 > [ 2.696002] [<c071b601>] register_pernet_operations+0x11/0x30 > [ 2.700002] [<c071b72c>] register_pernet_subsys+0x1c/0x30 > [ 2.704002] [<c0bf3c8c>] rtnetlink_init+0x4c/0x100 > [ 2.708002] [<c0bf4669>] netlink_proto_init+0x159/0x170 > [ 2.712002] [<c0101124>] do_one_initcall+0x24/0x150 > [ 2.716002] [<c0bbf3c7>] do_initcalls+0x27/0x40 > [ 2.723201] [<c0bbf3fc>] do_basic_setup+0x1c/0x20 > [ 2.728002] [<c0bbfb8a>] kernel_init+0x5a/0xa0 > [ 2.732002] [<c0103e47>] kernel_thread_helper+0x7/0x10 > [ 2.736002] [<ffffffff>] 0xffffffff We fix this false positive by annotating the bitfield in struct sock. Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
-
- 11 6月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
One of the problem with sock memory accounting is it uses a pair of sock_hold()/sock_put() for each transmitted packet. This slows down bidirectional flows because the receive path also needs to take a refcount on socket and might use a different cpu than transmit path or transmit completion path. So these two atomic operations also trigger cache line bounces. We can see this in tx or tx/rx workloads (media gateways for example), where sock_wfree() can be in top five functions in profiles. We use this sock_hold()/sock_put() so that sock freeing is delayed until all tx packets are completed. As we also update sk_wmem_alloc, we could offset sk_wmem_alloc by one unit at init time, until sk_free() is called. Once sk_free() is called, we atomic_dec_and_test(sk_wmem_alloc) to decrement initial offset and atomicaly check if any packets are in flight. skb_set_owner_w() doesnt call sock_hold() anymore sock_wfree() doesnt call sock_put() anymore, but check if sk_wmem_alloc reached 0 to perform the final freeing. Drawback is that a skb->truesize error could lead to unfreeable sockets, or even worse, prematurely calling __sk_free() on a live socket. Nice speedups on SMP. tbench for example, going from 2691 MB/s to 2711 MB/s on my 8 cpu dev machine, even if tbench was not really hitting sk_refcnt contention point. 5 % speedup on a UDP transmit workload (depends on number of flows), lowering TX completion cpu usage. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 6月, 2009 1 次提交
-
-
由 Sergey Lapin 提交于
IEEE 802.15.4 stack requires several constants to be defined/adjusted. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NSergey Lapin <slapin@ossfans.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 5月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Pure style cleanup patch. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 4月, 2009 1 次提交
-
-
由 Davide Libenzi 提交于
Add support for event-aware wakeups to the sockets code. Events are delivered to the wakeup target, so that epoll can avoid spurious wakeups for non-interesting events. Signed-off-by: NDavide Libenzi <davidel@xmailserver.org> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: William Lee Irwin III <wli@movementarian.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 2月, 2009 1 次提交
-
-
由 Andy Grover 提交于
Signed-off-by: NAndy Grover <andy.grover@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 2月, 2009 1 次提交
-
-
由 Eugene Teo 提交于
The fix for CVE-2009-0676 (upstream commit df0bca04) is incomplete. Note that the same problem of leaking kernel memory will reappear if someone on some architecture uses struct timeval with some internal padding (for example tv_sec 64-bit and tv_usec 32-bit) --- then, you are going to leak the padded bytes to userspace. Signed-off-by: NEugene Teo <eugeneteo@kernel.sg> Reported-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2009 1 次提交
-
-
由 David S. Miller 提交于
A long time ago we had bugs, primarily in TCP, where we would modify skb->truesize (for TSO queue collapsing) in ways which would corrupt the socket memory accounting. skb_truesize_check() was added in order to try and catch this error more systematically. However this debugging check has morphed into a Frankenstein of sorts and these days it does nothing other than catch false-positives. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 2月, 2009 1 次提交
-
-
由 Patrick Ohly 提交于
The overlap with the old SO_TIMESTAMP[NS] options is handled so that time stamping in software (net_enable_timestamp()) is enabled when SO_TIMESTAMP[NS] and/or SO_TIMESTAMPING_RX_SOFTWARE is set. It's disabled if all of these are off. Signed-off-by: NPatrick Ohly <patrick.ohly@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 2月, 2009 1 次提交
-
-
由 Clément Lecigne 提交于
In function sock_getsockopt() located in net/core/sock.c, optval v.val is not correctly initialized and directly returned in userland in case we have SO_BSDCOMPAT option set. This dummy code should trigger the bug: int main(void) { unsigned char buf[4] = { 0, 0, 0, 0 }; int len; int sock; sock = socket(33, 2, 2); getsockopt(sock, 1, SO_BSDCOMPAT, &buf, &len); printf("%x%x%x%x\n", buf[0], buf[1], buf[2], buf[3]); close(sock); } Here is a patch that fix this bug by initalizing v.val just after its declaration. Signed-off-by: NClément Lecigne <clement.lecigne@netasq.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2009 1 次提交
-
-
由 Herbert Xu 提交于
The function sock_alloc_send_pskb is completely useless if not exported since most of the code in it won't be used as is. In fact, this code has already been duplicated in the tun driver. Now that we need accounting in the tun driver, we can in fact use this function as is. So this patch marks it for export again. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2008 1 次提交
-
-
由 David S. Miller 提交于
This reverts commit 70355602. As pointed out by Mark McLoughlin IP_PKTINFO cmsg data is one post-queueing user, so this optimization is not valid right now. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 11月, 2008 2 次提交
-
-
由 Eric Dumazet 提交于
When queuing a skb to sk->sk_receive_queue, we can release its dst, not anymore needed. Since current cpu did the dst_hold(), refcount is probably still hot int this cpu caches. This avoids readers to access the original dst to decrement its refcount, possibly a long time after packet reception. This should speedup UDP and RAW receive path. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Instead of using one atomic_t per protocol, use a percpu_counter for "sockets_allocated", to reduce cache line contention on heavy duty network servers. Note : We revert commit (248969ae net: af_unix can make unix_nr_socks visbile in /proc), since it is not anymore used after sock_prot_inuse_add() addition Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 11月, 2008 1 次提交
-
-
由 Catalin Marinas 提交于
If the slub allocator is used, kmem_cache_create() may merge two or more kmem_cache's into one but the cache name pointer is not updated and kmem_cache_name() is no longer guaranteed to return the pointer passed to the former function. This patch stores the kmalloc'ed pointers in the corresponding request_sock_ops and timewait_sock_ops structures. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2008 1 次提交
-
-
由 Eric Dumazet 提交于
Converting /proc/net/protocols to be namespace aware is quite easy and permits us to use sock_prot_inuse_get(). This provides seperate counters for each protocol. For example we can really count TCPv6 sockets and TCPv4 sockets, while previously, we had the same value, and this value was not namespace aware. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2008 1 次提交
-
-
由 Eric Dumazet 提交于
RCU was added to UDP lookups, using a fast infrastructure : - sockets kmem_cache use SLAB_DESTROY_BY_RCU and dont pay the price of call_rcu() at freeing time. - hlist_nulls permits to use few memory barriers. This patch uses same infrastructure for TCP/DCCP established and timewait sockets. Thanks to SLAB_DESTROY_BY_RCU, no slowdown for applications using short lived TCP connections. A followup patch, converting rwlocks to spinlocks will even speedup this case. __inet_lookup_established() is pretty fast now we dont have to dirty a contended cache line (read_lock/read_unlock) Only established and timewait hashtable are converted to RCU (bind table and listen table are still using traditional locking) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-