This patch adds support for enabling and context switching the Target
Address Register in Power8. The TAR is a new special purpose register
that can be used for computed branches with the bctar[l] (branch
conditional to TAR) instruction in the same manner as the count and link
registers.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NMatt Evans <matt@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Change the hardware breakpoint code so that we can support wider ranged
breakpoints.

This means both ptrace and perf hardware breakpoints can use upto 512 byte long
breakpoints when using the DAWR and only 8 byte when using the DABR.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use local_paca directly in macro SHARED_PROCESSOR, as all processors
have the same value for the field shared_proc, so we don't need care
racy here.
Reported-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NLi Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have a mix of decimal and hex here, so lets make them consistently
hex.  Also, strace will print them in hex if it can't decode them, so
having them in hex here makes it easier to match up.

No functional change.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With allmodconfig we are getting:
  drivers/tty/synclink_gt.c:160:12: error: conflicting types for 'set_break'
  arch/powerpc/include/asm/debug.h:49:5: note: previous declaration of 'set_break' was here

  drivers/tty/synclinkmp.c:526:12: error: conflicting types for 'set_break'
  arch/powerpc/include/asm/debug.h:49:5: note: previous declaration of 'set_break' was here

This renames set_break to set_breakpoint to avoid this naming conflict
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The DSCR (aka Data Stream Control Register) is supported on some
server PowerPC chips and allow some control over the prefetch
of data streams.

The kernel already supports DSCR value per thread but there is also
a need in a ability to change it from an external process for
the specific pid.

The patch adds new register index PT_DSCR (index=44) which can be
set/get by:
  ptrace(PTRACE_POKEUSER, traced_process, PT_DSCR << 3, dscr);
  dscr = ptrace(PTRACE_PEEKUSER, traced_process, PT_DSCR << 3, NULL);

The patch does not increase PT_REGS_COUNT as the pt_regs struct has not
been changed.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The DDW code uses a eeh_dev struct from the pci_dev. However, this is
not set until eeh_add_device_late is called.

Since pci_bus_add_devices is called before eeh_add_device_late, the PCI
devices are added to the bus, making drivers' probe hooks to be called.
These will call set_dma_mask, which will call the DDW code, which will
require the eeh_dev struct from pci_dev. This would result in a crash,
due to a NULL dereference.

Calling eeh_add_device_late after pci_bus_add_devices would make the
system BUG, because device files shouldn't be added to devices there
were not added to the system. So, a new function is needed to add such
files only after pci_bus_add_devices have been called.

Cc: stable@vger.kernel.org
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This adds DAWR supoprt to the set_break().

It does both bare metal and PAPR versions of setting the DAWR.

There is still some work we can do to make full use of the watchpoint but that
will come later.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This is a rewrite so that we don't assume we are using the DABR throughout the
code.  We now use the arch_hw_breakpoint to store the breakpoint in a generic
manner in the thread_struct, rather than storing the raw DABR value.

The ptrace GET/SET_DEBUGREG interface currently passes the raw DABR in from
userspace.  We keep this functionality, so that future changes (like the POWER8
DAWR), will still fake the DABR to userspace.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

.. and add it to POWER8 cpu features.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This frees up 7 bits for crazy new CPU features.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

These are 32 bit, so no need to have a bunch of wasted 0s.

The 0s saved here can be put to better use elsewhere, like at the end of my pay
check.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 6/6] powerpc: Implement PPR save/restore

When the task enters in to kernel space, the user defined priority (PPR)
will be saved in to PACA at the beginning of first level exception
vector and then copy from PACA to thread_info in second level vector.
PPR will be restored from thread_info before exits the kernel space.

P7/P8 temporarily raises the thread priority to higher level during
exception until the program executes HMT_* calls. But it will not modify
PPR register. So we save PPR value whenever some register is available
to use and then calls HMT_MEDIUM to increase the priority. This feature
supports on P7 or later processors.

We save/ restore PPR for all exception vectors except system call entry.
GLIBC will be saving / restore for system calls. So the default PPR
value (3) will be set for the system call exit when the task returned
to the user space.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 5/6] powerpc: Macros for saving/restore PPR

Several macros are defined for saving and restore user defined PPR value.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 4/6] powerpc: Define ppr in thread_struct

ppr in thread_struct is used to save PPR and restore it before process exits
from kernel.

This patch sets the default priority to 3 when tasks are created such
that users can use 4 for higher priority tasks.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 3/6] powerpc: Increase exceptions arrays in paca struct to save PPR

Using paca to save user defined PPR value in the first level exception vector.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 2/6] powerpc: Enable PPR save/restore

SMT thread status register (PPR) is used to set thread priority. This patch
enables PPR save/restore feature (CPU_FTR_HAS_PPR) on POWER7 and POWER8 systems.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

[PATCH 1/6] powerpc: Move branch instruction from ACCOUNT_CPU_USER_ENTRY to caller

The first instruction in ACCOUNT_CPU_USER_ENTRY is 'beq' which checks for
exceptions coming from kernel mode. PPR value will be saved immediately after
ACCOUNT_CPU_USER_ENTRY and is also for user level exceptions. So moved this
branch instruction in the caller code.
Signed-off-by: NHaren Myneni <haren@us.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

For PR KVM we allow userspace to map 0xc000000000000000. Because
transitioning from userspace to the guest kernel may use the relocated
exception vectors we have to disable relocation on exceptions whenever
PR KVM is active as we cannot trust that address.

This issue does not apply to HV KVM, since changing from a guest to the
hypervisor will never use the relocated exception vectors.

Currently the hypervisor interface only allows us to toggle relocation
on exceptions on a partition wide scope, so we need to globally disable
relocation on exceptions when the first PR KVM instance is started and
only re-enable them when all PR KVM instances have been destroyed.

It's a bit heavy handed, but until the hypervisor gives us a lightweight
way to toggle relocation on exceptions on a single thread it's only real
option.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The ppc64 kernel can get loaded at any address which means
our very early init code in prom_init.c must be relocatable. We do
this with a pretty nasty RELOC() macro that we wrap accesses of
variables with. It is very fragile and sometimes we forget to add a
RELOC() to an uncommon path or sometimes a compiler change breaks it.

32bit has a much more elegant solution where we build prom_init.c
with -mrelocatable and then process the relocations manually.
Unfortunately we can't do the equivalent on 64bit and we would
have to build the entire kernel relocatable (-pie), resulting in a
large increase in kernel footprint (megabytes of relocation data).
The relocation data will be marked __initdata but it still creates
more pressure on our already tight memory layout at boot.

Alan Modra pointed out that the 64bit ABI is relocatable even
if we don't build with -pie, we just need to relocate the TOC.
This patch implements that idea and relocates the TOC entries of
prom_init.c. An added bonus is there are very few relocations to
process which helps keep boot times on simulators down.

gcc does not put 64bit integer constants into the TOC but to be
safe we may want a build time script which passes through the
prom_init.c TOC entries to make sure everything looks reasonable.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Change the representation of the PMU flags from decimal to hex since they
are bitfields which are easier to read in hex.
Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch actually hooks up doorbell interrupts on POWER8:

- Select the PPC_DOORBELL Kconfig option from PPC_PSERIES

- Add the doorbell CPU feature bit to POWER8

- We define a new pSeries_cause_ipi_mux() function that issues a
  doorbell interrupt if the recipient is another thread within the same
  core as the sender. If the recipient is in a different core it falls
  back to using XICS to deliver the IPI as before.

- During pSeries_smp_probe() at boot, we check if doorbell interrupts
  are supported. If they are we set the cause_ipi function pointer to
  the above mentioned function, otherwise we leave it as whichever XICS
  cause_ipi function was determined by xics_smp_probe().
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On book3s we have two msgsnd instructions with differing privilege
levels. This patch selects the appropriate instruction to use whenever
we send a doorbell interrupt.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Directed Privileged Doorbell Interrupts come in at 0xa00 (or
0xc000000000004a00 if relocation on exception is enabled), so add
exception vectors at these locations.

If doorbell support is not compiled in we handle it as an
unknown_exception.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Directed Hypervisor Doorbell Interrupts come in at 0xe80 (or
0xc000000000004e80 if relocation on exceptions is enabled), so add
exception vectors at these locations.

If doorbell support is not compiled in we handle it as an
unknown_exception.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

There are a few key differences between doorbells on server compared
with embedded that we care about on Linux, namely:

- We have a new msgsndp instruction for directed privileged doorbells.
  msgsnd is used for directed hypervisor doorbells.
- The tag we use in the instruction is the Thread Identification
  Register of the recipient thread (since server doorbells can only
  occur between threads within a single core), and is only 7 bits wide.
- A new message type is introduced for server doorbells (none of the
  existing book3e message types are currently supported on book3s).
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Tested-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch consists of:
- Add driver for OCM component
- Export OCM Information at /sys/kernel/debug/ppc4xx_ocm/info
Signed-off-by: NVinh Nguyen Huu Tuong <vhtnguyen@apm.com>
Acked-by: NJosh Boyer <jwboyer@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we search for the best_energy hcall using a custom function.  Move
this to using the firmware_feature_table.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
cc: Linux PPC dev <linuxppc-dev@ozlabs.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

CONFIG_HOTPLUG is going away as an option.  As a result, the __dev*
markings need to be removed.

This change removes the use of __devinit, __devexit_p, __devinitdata,
__devinitconst, and __devexit from these drivers.

Based on patches originally written by Bill Pemberton, but redone by me
in order to handle some of the coding style issues better, by hand.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The include/uapi/asm/kvm_para.h includes
<include/uapi/asm/epapr_hcalls.h> but the correct reference
should be <include/asm/epapr_hcalls.h> as this is the place
where make install_header installs the header files for
userspace.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

All architectures have
	CONFIG_GENERIC_KERNEL_THREAD
	CONFIG_GENERIC_KERNEL_EXECVE
	__ARCH_WANT_SYS_EXECVE
None of them have __ARCH_WANT_KERNEL_EXECVE and there are only two callers
of kernel_execve() (which is a trivial wrapper for do_execve() now) left.
Kill the conditionals and make both callers use do_execve().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This function is used by sparc, powerpc tile and arm64 for compat support.
 The patch adds a generic implementation with a wrapper for PowerPC to do
the u32->int sign extension.

The reason for a single patch covering powerpc, tile, sparc and arm64 is
to keep it bisectable, otherwise kernel building may fail with mismatched
function declarations.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>  [for tile]
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently the __define_initcall() macro takes three arguments, fn, id and
level.  The level argument is exactly the same as the id argument but
wrapped in quotes.  To overcome this need to specify three arguments to
the __define_initcall macro, where one argument is the stringification of
another, we can just use the stringification macro instead.
Signed-off-by: NMatthew Leach <matthew@mattleach.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

(This is just for Acks: this won't work without the actual syscall patches,
 sitting in my tree for -next at the moment).
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Implement ONE_REG interface for EPCR register adding KVM_REG_PPC_EPCR to
the list of ONE_REG PPC supported registers.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
[agraf: remove HV dependency, use get/put_user]
Signed-off-by: NAlexander Graf <agraf@suse.de>

In BookE, EPCR is defined and valid when either the HV or the 64bit
category are implemented. Reflect this in the field definition.

Today the only KVM target on 64bit is HV enabled, so there is no
change in actual source code, but this keeps the code closer to the
spec and doesn't build up artificial road blocks for a PR KVM
on 64bit.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Extend MAS2 EPN mask to retain most significant bits on 64-bit hosts.
Use this mask in tlb effective address accessor.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Mask high 32 bits of effective address in emulation layer for guests running
in 32-bit mode.
Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com>
[agraf: fix indent]
Signed-off-by: NAlexander Graf <agraf@suse.de>