Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 05 12月, 2013 14 次提交
    • M
      powerpc/powernv: Infrastructure to read opal messages in generic format. · 24366360
      由 Mahesh Salgaonkar 提交于 
      Opal now has a new messaging infrastructure to push the messages to
linux in a generic format for different type of messages using only one
event bit. The format of the opal message is as below:

struct opal_msg {
        uint32_t msg_type;
	uint32_t reserved;
	uint64_t params[8];
};

This patch allows clients to subscribe for notification for specific
message type. It is upto the subscriber to decipher the messages who showed
interested in receiving specific message type.

The interface to subscribe for notification is:

	int opal_message_notifier_register(enum OpalMessageType msg_type,
                                        struct notifier_block *nb)

The notifier will fetch the opal message when available and notify the
subscriber with message type and the opal message. It is subscribers
responsibility to copy the message data before returning from notifier
callback.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      24366360
    • G
      powerpc/windfarm: Remove superfluous name casts · 8bb61fe1
      由 Geert Uytterhoeven 提交于 
      wf_sensor.name is "const char *"
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8bb61fe1
    • M
      powerpc/powernv: Machine check exception handling. · b63a0ffe
      由 Mahesh Salgaonkar 提交于 
      Add basic error handling in machine check exception handler.

- If MSR_RI isn't set, we can not recover.
- Check if disposition set to OpalMCE_DISPOSITION_RECOVERED.
- Check if address at fault is inside kernel address space, if not then send
  SIGBUS to process if we hit exception when in userspace.
- If address at fault is not provided then and if we get a synchronous machine
  check while in userspace then kill the task.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b63a0ffe
    • M
      powerpc/powernv: Remove machine check handling in OPAL. · 28446de2
      由 Mahesh Salgaonkar 提交于 
      Now that we are ready to handle machine check directly in linux, do not
register with firmware to handle machine check exception.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      28446de2
    • M
      powerpc/book3s: Queue up and process delayed MCE events. · b5ff4211
      由 Mahesh Salgaonkar 提交于 
      When machine check real mode handler can not continue into host kernel
in V mode, it returns from the interrupt and we loose MCE event which
never gets logged. In such a situation queue up the MCE event so that
we can log it later when we get back into host kernel with r1 pointing to
kernel stack e.g. during syscall exit.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b5ff4211
    • M
      powerpc/book3s: Decode and save machine check event. · 36df96f8
      由 Mahesh Salgaonkar 提交于 
      Now that we handle machine check in linux, the MCE decoding should also
take place in linux host. This info is crucial to log before we go down
in case we can not handle the machine check errors. This patch decodes
and populates a machine check event which contain high level meaning full
MCE information.

We do this in real mode C code with ME bit on. The MCE information is still
available on emergency stack (in pt_regs structure format). Even if we take
another exception at this point the MCE early handler will allocate a new
stack frame on top of current one. So when we return back here we still have
our MCE information safe on current stack.

We use per cpu buffer to save high level MCE information. Each per cpu buffer
is an array of machine check event structure indexed by per cpu counter
mce_nest_count. The mce_nest_count is incremented every time we enter
machine check early handler in real mode to get the current free slot
(index = mce_nest_count - 1). The mce_nest_count is decremented once the
MCE info is consumed by virtual mode machine exception handler.

This patch provides save_mce_event(), get_mce_event() and release_mce_event()
generic routines that can be used by machine check handlers to populate and
retrieve the event. The routine release_mce_event() will free the event slot so
that it can be reused. Caller can invoke get_mce_event() with a release flag
either to release the event slot immediately OR keep it so that it can be
fetched again. The event slot can be also released anytime by invoking
release_mce_event().

This patch also updates kvm code to invoke get_mce_event to retrieve generic
mce event rather than paca->opal_mce_evt.

The KVM code always calls get_mce_event() with release flags set to false so
that event is available for linus host machine

If machine check occurs while we are in guest, KVM tries to handle the error.
If KVM is able to handle MC error successfully, it enters the guest and
delivers the machine check to guest. If KVM is not able to handle MC error, it
exists the guest and passes the control to linux host machine check handler
which then logs MC event and decides how to handle it in linux host. In failure
case, KVM needs to make sure that the MC event is available for linux host to
consume. Hence KVM always calls get_mce_event() with release flags set to false
and later it invokes release_mce_event() only if it succeeds to handle error.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      36df96f8
    • M
      powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8. · ae744f34
      由 Mahesh Salgaonkar 提交于 
      This patch handles the memory errors on power8. If we get a machine check
exception due to SLB or TLB errors, then flush SLBs/TLBs and reload SLBs to
recover.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ae744f34
    • M
      powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power7. · e22a2274
      由 Mahesh Salgaonkar 提交于 
      If we get a machine check exception due to SLB or TLB errors, then flush
SLBs/TLBs and reload SLBs to recover. We do this in real mode before turning
on MMU. Otherwise we would run into nested machine checks.

If we get a machine check when we are in guest, then just flush the
SLBs and continue. This patch handles errors for power7. The next
patch will handle errors for power8
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      e22a2274
    • M
      powerpc/book3s: Add flush_tlb operation in cpu_spec. · 04407050
      由 Mahesh Salgaonkar 提交于 
      This patch introduces flush_tlb operation in cpu_spec structure. This will
help us to invoke appropriate CPU-side flush tlb routine. This patch
adds the foundation to invoke CPU specific flush routine for respective
architectures. Currently this patch introduce flush_tlb for p7 and p8.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      04407050
    • M
      powerpc/book3s: Introduce a early machine check hook in cpu_spec. · 4c703416
      由 Mahesh Salgaonkar 提交于 
      This patch adds the early machine check function pointer in cputable for
CPU specific early machine check handling. The early machine handle routine
will be called in real mode to handle SLB and TLB errors. We can not reuse
the existing machine_check hook because it is always invoked in kernel
virtual mode and we would already be in trouble if we get SLB or TLB errors.
This patch just sets up a mechanism to invoke CPU specific handler. The
subsequent patches will populate the function pointer.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      4c703416
    • M
      powerpc/book3s: Return from interrupt if coming from evil context. · 1c51089f
      由 Mahesh Salgaonkar 提交于 
      We can get machine checks from any context. We need to make sure that
we handle all of them correctly. If we are coming from hypervisor user-space,
we can continue in host kernel in virtual mode to deliver the MC event.
If we got woken up from power-saving mode then we may come in with one of
the following state:
 a. No state loss
 b. Supervisor state loss
 c. Hypervisor state loss
For (a) and (b), we go back to nap again. State (c) is fatal, keep spinning.

For all other context which we not sure of queue up the MCE event and return
from the interrupt.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      1c51089f
    • M
      powerpc/book3s: handle machine check in Linux host. · 1e9b4507
      由 Mahesh Salgaonkar 提交于 
      Move machine check entry point into Linux. So far we were dependent on
firmware to decode MCE error details and handover the high level info to OS.

This patch introduces early machine check routine that saves the MCE
information (srr1, srr0, dar and dsisr) to the emergency stack. We allocate
stack frame on emergency stack and set the r1 accordingly. This allows us to be
prepared to take another exception without loosing context. One thing to note
here that, if we get another machine check while ME bit is off then we risk a
checkstop. Hence we restrict ourselves to save only MCE information and
register saved on PACA_EXMC save are before we turn the ME bit on. We use
paca->in_mce flag to differentiate between first entry and nested machine check
entry which helps proper use of emergency stack. We increment paca->in_mce
every time we enter in early machine check handler and decrement it while
leaving. When we enter machine check early handler first time (paca->in_mce ==
0), we are sure nobody is using MC emergency stack and allocate a stack frame
at the start of the emergency stack. During subsequent entry (paca->in_mce >
0), we know that r1 points inside emergency stack and we allocate separate
stack frame accordingly. This prevents us from clobbering MCE information
during nested machine checks.

The early machine check handler changes are placed under CPU_FTR_HVMODE
section. This makes sure that the early machine check handler will get executed
only in hypervisor kernel.

This is the code flow:

		Machine Check Interrupt
			|
			V
		   0x200 vector				  ME=0, IR=0, DR=0
			|
			V
	+-----------------------------------------------+
	|machine_check_pSeries_early:			| ME=0, IR=0, DR=0
	|	Alloc frame on emergency stack		|
	|	Save srr1, srr0, dar and dsisr on stack |
	+-----------------------------------------------+
			|
		(ME=1, IR=0, DR=0, RFID)
			|
			V
		machine_check_handle_early		  ME=1, IR=0, DR=0
			|
			V
	+-----------------------------------------------+
	|	machine_check_early (r3=pt_regs)	| ME=1, IR=0, DR=0
	|	Things to do: (in next patches)		|
	|		Flush SLB for SLB errors	|
	|		Flush TLB for TLB errors	|
	|		Decode and save MCE info	|
	+-----------------------------------------------+
			|
	(Fall through existing exception handler routine.)
			|
			V
		machine_check_pSerie			  ME=1, IR=0, DR=0
			|
		(ME=1, IR=1, DR=1, RFID)
			|
			V
		machine_check_common			  ME=1, IR=1, DR=1
			.
			.
			.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      1e9b4507
    • M
      powerpc/book3s: Introduce exclusive emergency stack for machine check exception. · 729b0f71
      由 Mahesh Salgaonkar 提交于 
      This patch introduces exclusive emergency stack for machine check exception.
We use emergency stack to handle machine check exception so that we can save
MCE information (srr1, srr0, dar and dsisr) before turning on ME bit and be
ready for re-entrancy. This helps us to prevent clobbering of MCE information
in case of nested machine checks.

The reason for using emergency stack over normal kernel stack is that the
machine check might occur in the middle of setting up a stack frame which may
result into improper use of kernel stack.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      729b0f71
    • M
      powerpc/book3s: Split the common exception prolog logic into two section. · b14a7253
      由 Mahesh Salgaonkar 提交于 
      This patch splits the common exception prolog logic into three parts to
facilitate reuse of existing code in the next patch. This patch also
re-arranges few instructions in such a way that the second part now deals
with saving register values from paca save area to stack frame, and
the third part deals with saving current register values to stack frame.

The second and third part will be reused in the machine check exception
routine in the subsequent patch.

Please note that this patch does not introduce or change existing code
logic. Instead it is just a code movement and instruction re-ordering.

Patch Acked-by Paul. But made some minor modification (explained above) to
address Paul's comment in the later patch(3).
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b14a7253
  3. 02 12月, 2013 12 次提交
  5. 27 11月, 2013 1 次提交
  7. 25 11月, 2013 6 次提交
    • C
      arch/powerpc/kernel: Use %12.12s instead of %12s to avoid memory overflow · e0513d9e
      由 Chen Gang 提交于 
      for tmp_part->header.name:
    it is "Terminating null required only for names < 12 chars".
    so need to limit the %.12s for it in printk

  additional info:

    %12s  limit the width, not for the original string output length
          if name length is more than 12, it still can be fully displayed.
          if name length is less than 12, the ' ' will be filled before name.

    %.12s truly limit the original string output length (precision)
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      e0513d9e
    • M
      powerpc/signals: Improved mark VSX not saved with small contexts fix · ec67ad82
      由 Michael Neuling 提交于 
      In a recent patch:
  commit c13f20ac
  Author: Michael Neuling <mikey@neuling.org>
  powerpc/signals: Mark VSX not saved with small contexts

We fixed an issue but an improved solution was later discussed after the patch
was merged.

Firstly, this patch doesn't handle the 64bit signals case, which could also hit
this issue (but has never been reported).

Secondly, the original patch isn't clear what MSR VSX should be set to.  The
new approach below always clears the MSR VSX bit (to indicate no VSX is in the
context) and sets it only in the specific case where VSX is available (ie. when
VSX has been used and the signal context passed has space to provide the
state).

This reverts the original patch and replaces it with the improved solution.  It
also adds a 64 bit version.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Cc: stable@vger.kernel.org
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      ec67ad82
    • H
      powerpc/kdump: Adding symbols in vmcoreinfo to facilitate dump filtering · 8ff81271
      由 Hari Bathini 提交于 
      When CONFIG_SPARSEMEM_VMEMMAP option is used in kernel, makedumpfile fails
to filter vmcore dump as it fails to do vmemmap translations. So far
dump filtering on ppc64 never had to deal with vmemmap addresses seperately
as vmemmap regions where mapped in zone normal. But with the inclusion of
CONFIG_SPARSEMEM_VMEMMAP config option in kernel, this vmemmap address
translation support becomes necessary for dump filtering. For vmemmap adress
translation, few kernel symbols are needed by dump filtering tool. This patch
adds those symbols to vmcoreinfo, which a dump filtering tool can use for
filtering the kernel dump. Tested this changes successfully with makedumpfile
tool that supports vmemmap to physical address translation outside zone normal.

[ Removed unneeded #ifdef as suggested by Michael Ellerman --BenH ]
Signed-off-by: NHari Bathini <hbathini@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8ff81271
    • A
      powerpc: allyesconfig should not select CONFIG_CPU_LITTLE_ENDIAN · 962bc221
      由 Anton Blanchard 提交于 
      Stephen reported a failure in an allyesconfig build.
CONFIG_CPU_LITTLE_ENDIAN=y gets set but his toolchain is not
new enough to support little endian. We really want to
default to a big endian build; Ben suggested using a choice
which defaults to CPU_BIG_ENDIAN.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      962bc221
    • M
      powerpc: Fix error when cross building TAGS & cscope · 924dd50b
      由 Michael Neuling 提交于 
      Currently if I cross build TAGS or cscope from x86 I get this:
  % make ARCH=powerpc TAGS
  gcc-4.8.real: error: unrecognized command line option ‘-mbig-endian’
  GEN     TAGS
  %

I'm not setting CROSS_COMPILE= as logically I shouldn't need to and I
haven't needed to in the past when building TAGS or cscope.  Also, the
above completess correct as the error is not fatal to the build.

This was caused by:
    commit d72b0801
    Author: Ian Munsie <imunsie@au1.ibm.com>
    powerpc: Add ability to build little endian kernels

The below fixes this by testing for the -mbig-endian option before
adding it.

I've not done the same thing in the little endian case as if
-mlittle-endian doesn't exist, we probably want to fail quickly as you
probably have an old big endian compiler.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
      924dd50b
    • B
      Merge remote-tracking branch 'scott/master' into merge · 02ce6e87
      由 Benjamin Herrenschmidt 提交于 
      Scott wrote:

<<
The corenet64 patch fixes a regression introduced in 3.13-rc1 (commit
ef1313de, "powerpc: Add VMX optimised xor
for RAID5").

The 8xx patch fixes a regression introduced in 3.12 (commit
beb2dc0a, "powerpc: Convert some
mftb/mftbu into mfspr").

The other two patches are fixes for minor, long standing bugs.
>>
      02ce6e87
  9. 23 11月, 2013 7 次提交