- 21 4月, 2007 1 次提交
-
-
由 Trond Myklebust 提交于
Fix a regression due to the patch "NFS: disconnect before retrying NFSv4 requests over TCP" The assumption made in xprt_transmit() that the condition "req->rq_bytes_sent == 0 and request is on the receive list" should imply that we're dealing with a retransmission is false. Firstly, it may simply happen that the socket send queue was full at the time the request was initially sent through xprt_transmit(). Secondly, doing this for each request that was retransmitted implies that we disconnect and reconnect for _every_ request that happened to be retransmitted irrespective of whether or not a disconnection has already occurred. Fix is to move this logic into the call_status request timeout handler. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 4月, 2007 4 次提交
-
-
由 Denis Lunev 提交于
There is a race between netlink_dump_start() and netlink_release() that can lead to the situation when a netlink socket with non-zero callback is freed. Here it is: CPU1: CPU2 netlink_release(): netlink_dump_start(): sk = netlink_lookup(); /* OK */ netlink_remove(); spin_lock(&nlk->cb_lock); if (nlk->cb) { /* false */ ... } spin_unlock(&nlk->cb_lock); spin_lock(&nlk->cb_lock); if (nlk->cb) { /* false */ ... } nlk->cb = cb; spin_unlock(&nlk->cb_lock); ... sock_orphan(sk); /* * proceed with releasing * the socket */ The proposal it to make sock_orphan before detaching the callback in netlink_release() and to check for the sock to be SOCK_DEAD in netlink_dump_start() before setting a new callback. Signed-off-by: NDenis Lunev <den@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olaf Kirch 提交于
This patch fixes an oops first reported in mid 2006 - see http://lkml.org/lkml/2006/8/29/358 The cause of this bug report is that when an error is signalled on the socket, irda_recvmsg_stream returns without removing a local wait_queue variable from the socket's sk_sleep queue. This causes havoc further down the road. In response to this problem, a patch was made that invoked sock_orphan on the socket when receiving a disconnect indication. This is not a good fix, as this sets sk_sleep to NULL, causing applications sleeping in recvmsg (and other places) to oops. This is against the latest net-2.6 and should be considered for -stable inclusion. Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The way partial delivery is currently implemnted, it is possible to intereleave a message (either from another steram, or unordered) that is not part of partial delivery process. The only way to this is for a message to not be a fragment and be 'in order' or unorderd for a given stream. This will result in bypassing the reassembly/ordering queues where things live duing partial delivery, and the message will be delivered to the socket in the middle of partial delivery. This is a two-fold problem, in that: 1. the app now must check the stream-id and flags which it may not be doing. 2. this clearing partial delivery state from the association and results in ulp hanging. This patch is a band-aid over a much bigger problem in that we don't do stream interleave. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Make sure to actually assign the determined mode to rq->sadb_x_ipsecrequest_mode. Noticed by Joe Perches. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2007 8 次提交
-
-
由 NeilBrown 提交于
sk_info_authunix is not being protected properly so the object that it points to can be cache_put twice, leading to corruption. We borrow svsk->sk_defer_lock to provide the protection. We should probably rename that lock to have a more generic name - later. Thanks to Gabriel for reporting this. Cc: Greg Banks <gnb@melbourne.sgi.com> Cc: Gabriel Barazer <gabriel@oxeva.fr> Signed-off-by: NNeil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeny Kravtsunov 提交于
compare_ether_addr() implicitly requires that the addresses passed are 2-bytes aligned in memory. This is not true for br_stp_change_bridge_id() and br_stp_recalculate_bridge_id() in which one of the addresses is unsigned char *, and thus may not be 2-bytes aligned. Signed-off-by: NEvgeny Kravtsunov <emkravts@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPavel Emelianov <xemul@openvz.org>
-
由 Paolo Galtieri 提交于
During the sctp_bindx() call to add additional addresses to the endpoint, any v4mapped addresses are converted and stored as regular v4 addresses. However, when trying to remove these addresses, the v4mapped addresses are not converted and the operation fails. This patch unmaps the addresses on during the remove operation as well. Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tsutomu Fujii 提交于
In current implementation, LKSCTP does receive buffer accounting for data in sctp_receive_queue and pd_lobby. However, LKSCTP don't do accounting for data in frag_list when data is fragmented. In addition, LKSCTP doesn't do accounting for data in reasm and lobby queue in structure sctp_ulpq. When there are date in these queue, assertion failed message is printed in inet_sock_destruct because sk_rmem_alloc of oldsk does not become 0 when socket is destroyed. Signed-off-by: NTsutomu Fujii <t-fujii@nb.jp.nec.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelianov 提交于
Otherwise the following calltrace will lead to a wrong lockdep warning: neigh_proxy_process() `- lock(neigh_table->proxy_queue.lock); arp_redo /* via tbl->proxy_redo */ arp_process neigh_event_ns neigh_update skb_queue_purge `- lock(neighbor->arp_queue.lock); This is not a deadlock actually, as neighbor table's proxy_queue and the neighbor's arp_queue are different queues. Lockdep thinks there is a deadlock as both queues are initialized with skb_queue_head_init() and thus have a common class. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aubrey.Li 提交于
In net poll mode, the current checksum function doesn't consider the kind of packet which is padded to reach a specific minimum length. I believe that's the problem causing my test case failed. The following patch fixed this issue. Signed-off-by: NAubrey.Li <aubreylee@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazunori MIYAZAWA 提交于
We should not blindly convert between IPSEC_MODE_xxx and XFRM_MODE_xxx just by incrementing / decrementing because the assumption is not true any longer. Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org> Singed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Herbert Xu 提交于
Since this was added originally for Xen, and Xen has recently (~2.6.18) stopped using this function, we can safely get rid of it. Good timing too since this function has started to bit rot. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2007 4 次提交
-
-
由 David S. Miller 提交于
There are two device string comparison loops in arp_packet_match(). The first one goes byte-by-byte but the second one tries to be clever and cast the string to a long and compare by longs. The device name strings in the arp table entries are not guarenteed to be aligned enough to make this value, so just use byte-by-byte for both cases. Based upon a report by <drraid@gmail.com>. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
A packet which is being discarded because of no routes in the forwarding path should not be counted as OutNoRoutes but as InNoRoutes. Additionally, on this occasion, a packet whose destinaion is not valid should be counted as InAddrErrors separately. Based on patch from Mitsuru Chinen <mitch@linux.vnet.ibm.com>. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joy Latten 提交于
When sending a security context of 50+ characters in an ACQUIRE message, following kernel panic occurred. kernel BUG in xfrm_send_acquire at net/xfrm/xfrm_user.c:1781! cpu 0x3: Vector: 700 (Program Check) at [c0000000421bb2e0] pc: c00000000033b074: .xfrm_send_acquire+0x240/0x2c8 lr: c00000000033b014: .xfrm_send_acquire+0x1e0/0x2c8 sp: c0000000421bb560 msr: 8000000000029032 current = 0xc00000000fce8f00 paca = 0xc000000000464b00 pid = 2303, comm = ping kernel BUG in xfrm_send_acquire at net/xfrm/xfrm_user.c:1781! enter ? for help 3:mon> t [c0000000421bb650] c00000000033538c .km_query+0x6c/0xec [c0000000421bb6f0] c000000000337374 .xfrm_state_find+0x7f4/0xb88 [c0000000421bb7f0] c000000000332350 .xfrm_tmpl_resolve+0xc4/0x21c [c0000000421bb8d0] c0000000003326e8 .xfrm_lookup+0x1a0/0x5b0 [c0000000421bba00] c0000000002e6ea0 .ip_route_output_flow+0x88/0xb4 [c0000000421bbaa0] c0000000003106d8 .ip4_datagram_connect+0x218/0x374 [c0000000421bbbd0] c00000000031bc00 .inet_dgram_connect+0xac/0xd4 [c0000000421bbc60] c0000000002b11ac .sys_connect+0xd8/0x120 [c0000000421bbd90] c0000000002d38d0 .compat_sys_socketcall+0xdc/0x214 [c0000000421bbe30] c00000000000869c syscall_exit+0x0/0x40 --- Exception: c00 (System Call) at 0000000007f0ca9c SP (fc0ef8f0) is in userspace We are using size of security context from xfrm_policy to determine how much space to alloc skb and then putting security context from xfrm_state into skb. Should have been using size of security context from xfrm_state to alloc skb. Following fix does that Signed-off-by: NJoy Latten <latten@austin.ibm.com> Acked-by: NJames Morris <jmorris@namei.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jerome Borsboom 提交于
When a VLAN interface is created on top of a bridge interface and netfilter is enabled to see the bridged packets, the packets can be corrupted when passing through the netfilter code. This is caused by the VLAN driver not setting the 'protocol' and 'nh' members of the sk_buff structure. In general, this is no problem as the VLAN interface is mostly connected to a physical ethernet interface which does not use the 'protocol' and 'nh' members. For a bridge interface, however, these members do matter. Signed-off-by: NJerome Borsboom <j.borsboom@erasmusmc.nl> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2007 3 次提交
-
-
由 Andrew Morton 提交于
The pktgen module prevents suspend-to-disk. Fix. Acked-by: N"Michal Piotrowski" <michal.k.k.piotrowski@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Use put_unaligned to fix warnings about unaligned accesses. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon a report from Meelis Roos. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2007 1 次提交
-
-
由 Jaroslav Kysela 提交于
The clusterip_config_find_get() already increases entries reference counter, so there is no reason to do it twice in checkentry() callback. This causes the config to be freed before it is removed from the list, resulting in a crash when adding the next rule. Signed-off-by: NJaroslav Kysela <perex@suse.cz> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2007 2 次提交
-
-
由 David S. Miller 提交于
For the cases that slow_start_after_idle are meant to deal with, it is almost a certainty that the congestion window tests will think the connection is application limited and we'll thus decrease the cwnd there too. This defeats the whole point of setting slow_start_after_idle to zero. So test it there too. We do not cancel out the entire tcp_cwnd_validate() function so that if the sysctl is changed we still have the validation state maintained. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Userspace uses an integer for TCA_TCINDEX_SHIFT, the kernel was changed to expect and use a u16 value in 2.6.11, which broke compatibility on big endian machines. Change back to use int. Reported by Ole Reinartz <ole.reinartz@gmx.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2007 1 次提交
-
-
由 David S. Miller 提交于
This reverts a0d78ebf It causes pings to link-local addresses to fail. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 4月, 2007 4 次提交
-
-
由 Patrick McHardy 提交于
Beet mode looks for the beet pseudo header after the outer IP header, which is wrong since that is followed by the ESP header. Additionally it needs to adjust the packet length after removing the pseudo header and point the data pointer to the real data location. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Beet mode decapsulation fails to properly set up the skb pointers, which only works by accident in combination with CONFIG_NETFILTER, since in that case the skb is fixed up in xfrm4_input before passing it to the netfilter hooks. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
draft-nikander-esp-beet-mode-07.txt states "The padding MUST be filled with NOP options as defined in Internet Protocol [1] section 3.1 Internet header format.", so do that. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Beet mode calculates an incorrect value for the transport header location when IP options are present, resulting in encapsulation errors. The correct location is 4 or 8 bytes before the end of the original IP header, depending on whether the pseudo header is padded. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 4月, 2007 4 次提交
-
-
由 Herbert Xu 提交于
Up until this point we've accepted replay window settings greater than 32 but our bit mask can only accomodate 32 packets. Thus any packet with a sequence number within the window but outside the bit mask would be accepted. This patch causes those packets to be rejected instead. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mitsuru Chinen 提交于
Incoming trancated packets are counted as not only InTruncatedPkts but also InHdrErrors. They should be counted as InTruncatedPkts only. Signed-off-by: NMitsuru Chinen <mitch@linux.vnet.ibm.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jean Delvare 提交于
When we receive an AppleTalk frame shorter than what its header says, we still attempt to verify its checksum, and trip on the BUG_ON() at the end of function atalk_sum_skb() because of the length mismatch. This has security implications because this can be triggered by simply sending a specially crafted ethernet frame to a target victim, effectively crashing that host. Thus this qualifies, I think, as a remote DoS. Here is the frame I used to trigger the crash, in npg format: <Appletalk Killer> { # Ethernet header ----- XX XX XX XX XX XX # Destination MAC 00 00 00 00 00 00 # Source MAC 00 1D # Length # LLC header ----- AA AA 03 08 00 07 80 9B # Appletalk # Appletalk header ----- 00 1B # Packet length (invalid) 00 01 # Fake checksum 00 00 00 00 # Destination and source networks 00 00 00 00 # Destination and source nodes and ports # Payload ----- 0C 0D 0E 0F 10 11 12 13 14 } The destination MAC address must be set to those of the victim. The severity is mitigated by two requirements: * The target host must have the appletalk kernel module loaded. I suspect this isn't so frequent. * AppleTalk frames are non-IP, thus I guess they can only travel on local networks. I am no network expert though, maybe it is possible to somehow encapsulate AppleTalk packets over IP. The bug has been reported back in June 2004: http://bugzilla.kernel.org/show_bug.cgi?id=2979 But it wasn't investigated, and was closed in July 2006 as both reporters had vanished meanwhile. This code was new in kernel 2.6.0-test5: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=7ab442d7e0a76402c12553ee256f756097cae2d2 And not modified since then, so we can assume that vanilla kernels 2.6.0-test5 and later, and distribution kernels based thereon, are affected. Note that I still do not know for sure what triggered the bug in the real-world cases. The frame could have been corrupted by the kernel if we have a bug hiding somewhere. But more likely, we are receiving the faulty frame from the network. Signed-off-by: NJean Delvare <jdelvare@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
The return value of kernel_recvmsg() should be assigned to "err", not compared with the random value of a never initialized "err" (and the "< 0" check wrongly always returned false since == comparisons never have a result < 0). Spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 4月, 2007 1 次提交
-
-
由 Eric W. Biederman 提交于
The generic networking code ensures that no two networking devices have the same name, so there is no time except when sysfs has implementation bugs that device_rename when called from dev_change_name will fail. The current error handling for errors from device_rename in dev_change_name is wrong and results in an unusable and unrecoverable network device if device_rename is happens to return an error. This patch removes the buggy error handling. Which confines the mess when device_rename hits a problem to sysfs, instead of propagating it the rest of the network stack. Making linux a little more robust. Without this patch you can observe what happens when sysfs has a bug when CONFIG_SYSFS_DEPRECATED is not set and you attempt to rename a real network device to a name like (broken_parity_status, device, modalias, power, resource2, subsystem_vendor, class, driver, irq, msi_bus, resource, subsystem, uevent, config, enable, local_cpus, numa_node, resource0, subsystem_device, vendor) Greg has a patch that fixes the sysfs bugs but he doesn't trust it for a 2.6.21 timeframe. This patch which just ignores errors should be safe and it keeps the system from going completely wacky. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 4月, 2007 4 次提交
-
-
由 John Heffner 提交于
Signed-off-by: NJohn Heffner <jheffner@psc.edu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
In article <20070329.142644.70222545.davem@davemloft.net> (at Thu, 29 Mar 2007 14:26:44 -0700 (PDT)), David Miller <davem@davemloft.net> says: > From: Sridhar Samudrala <sri@us.ibm.com> > Date: Thu, 29 Mar 2007 14:17:28 -0700 > > > The check for length in rawv6_sendmsg() is incorrect. > > As len is an unsigned int, (len < 0) will never be TRUE. > > I think checking for IPV6_MAXPLEN(65535) is better. > > > > Is it possible to send ipv6 jumbo packets using raw > > sockets? If so, we can remove this check. > > I don't see why such a limitation against jumbo would exist, > does anyone else? > > Thanks for catching this Sridhar. A good compiler should simply > fail to compile "if (x < 0)" when 'x' is an unsigned type, don't > you think :-) Dave, we use "int" for returning value, so we should fix this anyway, IMHO; we should not allow len > INT_MAX. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
tp->root is not freed on destruction. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steven Whitehouse 提交于
This changes the "not found" error return for the lookup function to -ESRCH so that it can be distinguished from the case where a rule or route resulting in -ENETUNREACH has been found during the search. It fixes a bug where if DECnet was compiled with routing support, but no routes were added to the routing table, it was failing to fall back to endnode routing. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NPatrick Caulfield <pcaulfie@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2007 1 次提交
-
-
由 Patrick McHardy 提交于
The input_device pointer is not refcounted, which means the device may disappear while packets are queued, causing a crash when ifb passes packets with a stale skb->dev pointer to netif_rx(). Fix by storing the interface index instead and do a lookup where neccessary. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2007 2 次提交
-
-
由 Jiri Kosina 提交于
I have a bugreport that scrollwheel of bluetooth version of apple mightymouse doesn't work. The USB version of mightymouse works, as there is a quirk for handling scrollwheel in hid/usbhid for it. Now that bluetooth git tree is hooked to generic hid layer, it could easily use the quirks which are already present in generic hid parser, hid-input, etc. Below is a simple patch against bluetooth git tree, which adds quirk handling to current bluetooth hidp code, and sets quirk flags for device 0x05ac/0x030c, which is the bluetooth version of the apple mightymouse. Signed-off-by: NJiri Kosina <jkosina@suse.cz> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnaldo Carvalho de Melo 提交于
We were only checking if there was enough space to put the int, but left len as specified by the (malicious) user, sigh, fix it by setting len to sizeof(val) and transfering just one int worth of data, the one asked for. Also check for negative len values. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-