- 13 12月, 2005 1 次提交
-
-
由 Andreas Schwab 提交于
Sam Ravnborg <sam@ravnborg.org> writes: > Author: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de> > > [PATCH] kbuild: make kernelrelease in unconfigured kernel prints an error > > Do not include .config for target kernelrelease This is wrong. KERNELRELEASE depends on CONFIG_LOCALVERSION, thus you need .config. Signed-off-by: NAndreas Schwab <schwab@suse.de> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 04 12月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Hey, for no other reason than the fact that I'll be off-line for a week. Of course, I could force everybody to just use git (and when I'm emperor of the world, don't think I won't!), but it seems some people want to just test official releases. Even if they are just -rc's. By the time I'm back, Andrew will have fixed all my bugs, and I'll release it as 2.6.15 and take all the credit. Mwahahahaaa Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 12月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 29 11月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 20 11月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 14 11月, 2005 1 次提交
-
-
In Uml, many definitions are borrowed from underlying subarch headers (with #include <asm/arch/stuff.h>). And it has become annoying to keep switching tag files all time, so by default index the underlying subarch headers too. Btw, it adds negligible space to the tags file (less than 1M surely, IIRC it was around 500k over 40M). Finally, preserve the ALLSOURCE_ARCHS command line option (I hope) - if it is set, it is used for headers too as before. But check my construct please, I didn't test this. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: NJeff Dike <jdike@addtoit.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 11月, 2005 2 次提交
-
-
由 Linus Torvalds 提交于
As per the new release rules: two weeks of merging, and then an -rc1 and calming down for the next release.
-
由 Linus Torvalds 提交于
After the last merge of the new unified 'powerpc' architecture, ppc64 no longer compiles cleanly as a standalone architecture. Some bits and pieces still exist as files under the old ppc64 hierarchy, but the old "ARCH=ppc64" is dead. So if "uname" says ppc64, that now implies that the default architecture should be "powerpc". Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 11月, 2005 1 次提交
-
-
由 Zachary Amsden 提交于
I have to revert the recent addition of -imacros to the Makefile to get my tool chain to build. Without the change, below, I get: Note that this looks entirely like a toolchain bug. Here is the offending command: [pid 12163] execve("/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0", ["/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0", "-lang-asm", "-nostdinc", "-Iinclude", "-Iinclude/asm-i386/mach-default", "-D__GNUC__=3", "-D__GNUC_MINOR__=2", "-D__GNUC_PATCHLEVEL__=2", "-D__GXX_ABI_VERSION=102", "-D__ELF__", "-Dunix", "-D__gnu_linux__", "-Dlinux", "-D__ELF__", "-D__unix__", "-D__gnu_linux__", "-D__linux__", "-D__unix", "-D__linux", "-Asystem=posix", "-D__NO_INLINE__", "-D__STDC_HOSTED__=1", "-Acpu=i386", "-Amachine=i386", "-Di386", "-D__i386", "-D__i386__", "-D__tune_i386__", "-D__KERNEL__", "-D__ASSEMBLY__", "-isystem", "/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/include", "-imacros", "include/linux/autoconf.h", "-MD", "arch/i386/kernel/.entry.o.d", "arch/i386/kernel/entry.S", "-o", "/tmp/ccOlsFJR.s"] Which should execute properly, I think. But it does not: zach-dev:linux-2.6.14-zach-work $ make CHK include/linux/version.h CHK include/linux/compile.h CHK usr/initramfs_list AS arch/i386/kernel/entry.o /usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0: output filename specified twice make[1]: *** [arch/i386/kernel/entry.o] Error 1 make: *** [arch/i386/kernel] Error 2 gcc (GCC) 3.2.2 20030222 (Red Hat Linux 3.2.2-5) Deprecating the -imacros fixes the build for me. It does not appear to be a simple argument overflow problem in trapcpp0, since deprecating all the defines reproduces the problem as well. Also, switching -imacros to -include fixes the problem. Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 10 11月, 2005 1 次提交
-
-
由 Uwe Zeisberger 提交于
Do not include .config for target kernelrelease Signed-off-by: NUwe Zeisberger <zeisberg@informatik.uni-freiburg.de> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 06 11月, 2005 1 次提交
-
-
由 Russell King 提交于
Include autoconf.h into every kernel compilation via the gcc command line using -imacros. This ensures that we have the kernel configuration included from the start, rather than relying on each file having #include <linux/config.h> as appropriate. History has shown that this is something which is difficult to get right. Since we now include the kernel configuration automatically, make configcheck becomes meaningless, so remove it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 04 11月, 2005 1 次提交
-
-
由 Jens Axboe 提交于
drivers/block/ is right now a mix of core and driver parts. Lets move the core parts to a new top level directory. Al will move the fs/ related block parts to block/ next. Signed-off-by: NJens Axboe <axboe@suse.de>
-
- 29 10月, 2005 1 次提交
-
-
由 Trond Myklebust 提交于
Currently, 'make distclean' causes stgit to barf since it may delete files in .git/patches. We really shouldn't allow 'make distclean' anywhere near .git... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 28 10月, 2005 2 次提交
-
-
由 Al Viro 提交于
Beginning of gfp_t annotations: - -Wbitwise added to CHECKFLAGS - old __bitwise renamed to __bitwise__ - __bitwise defined to either __bitwise__ or nothing, depending on __CHECK_ENDIAN__ being defined - gfp_t switched from __nocast to __bitwise__ - force cast to gfp_t added to __GFP_... constants - new helper - gfp_zone(); extracts zone bits out of gfp_t value and casts the result to int Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
"Better late than never"
-
- 20 10月, 2005 2 次提交
-
-
由 Linus Torvalds 提交于
The -rc4 release was supposed to be the last -rc, but here goes. The RCU fixes and the swiotlb changes need an -rc for final testing.
-
由 Tom Rini 提交于
The variable RCS_TAR_IGNORE is used in scripts/packaging/Makefile, but not exported from the main Makefile, so it's never used. This results in the rpm targets being very unhappy in quilted trees. Signed-off-by: NTom Rini <trini@kernel.crashing.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 18 10月, 2005 1 次提交
-
-
由 Mark Rustad 提交于
The following build error happens with 2.6.14-rc4 when CONFIG_KALLSYMS is not defined. The error message in a fragment of the output was: CC arch/i386/lib/usercopy.o AR arch/i386/lib/lib.a /bin/sh: line 1: +@: command not found make[3]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. CHK include/linux/compile.h Signed-off-by: NMark Rustad <mrustad@mac.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 11 10月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 01 10月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 20 9月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Avast, ye scurvy land-lubbers! Time to try out a new release. Arrr!
-
- 13 9月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Two weeks after 2.6.13: starting to calm things down.
-
- 12 9月, 2005 2 次提交
-
-
由 Sam Ravnborg 提交于
Al Viro reported that sometimes silentoldconfig failed because output directory was missing. So create it unconditionally before executing conf Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare The dependency chain looks like this now: prepare | +--> prepare0 | +--> archprepare | +--> scripts_basic +--> prepare1 | +---> prepare2 | +--> prepare3 So prepare 3 is processed before prepare2 etc. This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed. prepare0 which build the asm-offsets.h file will need the actions performed by archprepare. The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 11 9月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
iThis fixes a bug where the generated asm-offsets.h file was saved in the source tree even with make O=. Thanks to Stephen Rothwell <sfr@canb.auug.org.au> for the report. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 10 9月, 2005 5 次提交
-
-
由 Jan Beulich 提交于
Splitting of autoconf.h requires that split-include was built before, and needs to be-re-done when split-include changes. This dependency was previously missing. Additionally, since autoconf.h is (suppoosed to be) generated as a side effect of executing config targets, include/linux should be created prior to running the respective sub-make. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Jan Beulich 提交于
In order to maintain a more correct build number, updates to the version number should only be commited after a successful link of vmlinux, not before (so that errors in the link process don't lead to pointless increments). Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 viro@ZenIV.linux.org.uk 提交于
Allows to add to sparse arguments without mutilating makefiles - just pass CF=<arguments> and they will be added to CHECKFLAGS. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Zach Brown 提交于
Dunno if there was a conscious decision to leave it out, but if you're happy with adding some help text for it here's a patch against 2.6.13-mm1.. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Building asm-offsets.h has been moved to a seperate Kbuild file located in the top-level directory. This allow us to share the functionality across the architectures. The old rules in architecture specific Makefiles will die in subsequent patches. Furhtermore the usual kbuild dependency tracking is now used when deciding to rebuild asm-offsets.s. So we no longer risk to fail a rebuild caused by asm-offsets.c dependencies being touched. With this common rule-set we now force the same name across all architectures. Following patches will fix the rest. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 05 9月, 2005 1 次提交
-
-
由 Matt Mackall 提交于
Running 'make clean' was quietly deleting files in Mercurial kernel repositories matching '.*.d', which was corrupting the tags portions of the repository. Spotted and fixed by several people. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 8月, 2005 1 次提交
-
-
由 Benjamin LaHaise 提交于
We've had Woozy Numbat for a while now. Here's an updated name care of Jeff Garzik and myself. Signed-off-by: NBenjamin LaHaise <bcrl@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 8月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 24 8月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Too many changes to release a final 2.6.13.
-
- 11 8月, 2005 1 次提交
-
-
由 Ryan Anderson 提交于
If CONFIG_AUTO_LOCALVERSION is set, the user is using a git-based tree, and the current HEAD is not referred to by any tags in .git/refs/tags/, append -g and the first 8 characters of the commit to the version string. This makes it easier to use git-bisect, and/or to do a daily build, without trampling on your older, working builds, or accidentally setting up conflicting sets of modules. Signed-off-by: NRyan Anderson <ryan@michonline.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 08 8月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Last (?) -rc, partly brought on by the aic7xxx performance fixes (ie get them tested in an -rc release before the real 2.6.13).
-
- 02 8月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Ok, let's get it right this time
-
- 29 7月, 2005 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Sam Ravnborg 提交于
From: bongiojp@clarkson.edu <Jeremy Bongio> make TAGS does not make source code tags for emacs. It instead returns an error than "etags -" isn't valid. The problem is easily remedied. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 27 7月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
During last phase of the build the following message were displayed: /bin/sh: +@: command not found This message appears due to slightly changed semantics of cmd and if_changed_rule. The easy fix was to insert a dummy command first in rule_ksym_ld. The alternative was to redo part of this processing in the top-level Makefile - a volatile area that I try to avoid. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> ---
-