- 23 3月, 2010 19 次提交
-
-
由 Sage Weil 提交于
'OSD' means different things to different people; avoid it here to avoid confusion. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Clear pointer to mds request after dropping the reference to ensure we don't drop it again, as there is at least one error path through this function that does not reset fi->last_readdir to a new value. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Fix a broken check that a reply came back from the same MDS we sent the request to. I don't think a case that actually triggers this would ever come up in practice, but it's clearly wrong and easy to fix. Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Dan Carpenter 提交于
Return ERR_PTR(-ENOMEM) if kmalloc() fails. We handle allocation failures the same way later in the function. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Return error to original caller if register_session() fails. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Currently, if the wait_event_interruptible is interrupted, we return EAGAIN unconditionally and loop, such that we aren't, in fact, interruptible. So, propagate ERESTARTSYS if we get it. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We were rebuilding the snap context when it was not necessary (i.e. when the realm seq hadn't changed _and_ the parent seq was still older), which caused page snapc pointers to not match the realm's snapc pointer (even though the snap context itself was identical). This confused begin_write and put it into an endless loop. The correct logic is: rebuild snapc if _my_ realm seq changed, or if my parent realm's seq is newer than mine (and thus mine needs to be rebuilt too). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We get a fault callback on _every_ tcp connection fault. Normally, we want to reopen the connection when that happens. If the address we have is bad, however, and connection attempts always result in a connection refused or similar error, explicitly closing and reopening the msgr connection just prevents the messenger's backoff logic from kicking in. The result can be a console full of [ 3974.417106] ceph: osd11 10.3.14.138:6800 connection failed [ 3974.423295] ceph: osd11 10.3.14.138:6800 connection failed [ 3974.429709] ceph: osd11 10.3.14.138:6800 connection failed Instead, if we get a fault, and have outstanding requests, but the osd address hasn't changed and the connection never successfully connected in the first place, do nothing to the osd connection. The messenger layer will back off and retry periodically, because we never connected and thus the lossy bit is not set. Instead, touch each request's r_stamp so that handle_timeout can tell the request is still alive and kicking. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Make variable name slightly more generic, since it will (soon) reflect either the time the request was sent OR the time it was last determined to be still retrying. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The messenger fault was clearing the BUSY bit, for reasons unclear. This made it possible for the con->ops->fault function to reopen the connection, and requeue work in the workqueue--even though the current thread was already in con_work. This avoids a problem where the client busy loops with connection failures on an unreachable OSD, but doesn't address the root cause of that problem. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Prevent duplicate 'mds0 caps stale' message from spamming the console every few seconds while the MDS restarts. Set s_renew_requested earlier, so that we only print the message once, even if we don't send an actual request. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The incremental map decoding of pg pool updates wasn't skipping the snaps and removed_snaps vectors. This caused osd requests to stall when pool snapshots were created or fs snapshots were deleted. Use a common helper for full and incremental map decoders that decodes pools properly. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The wait_unsafe_requests() helper dropped the mdsc mutex to wait for each request to complete, and then examined r_node to get the next request after retaking the lock. But the request completion removes the request from the tree, so r_node was always undefined at this point. Since it's a small race, it usually led to a valid request, but not always. The result was an occasional crash in rb_next() while dereferencing node->rb_left. Fix this by clearing the rb_node when removing the request from the request tree, and not walking off into the weeds when we are done waiting for a request. Since the request we waited on will _always_ be out of the request tree, take a ref on the next request, in the hopes that it won't be. But if it is, it's ok: we can start over from the beginning (and traverse over older read requests again). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We were releasing used caps (e.g. FILE_CACHE) from encode_inode_release with MDS requests (e.g. setattr). We don't carry refs on most caps, so this code worked most of the time, but for setattr (utimes) we try to drop Fscr. This causes cap state to get slightly out of sync with reality, and may result in subsequent mds revoke messages getting ignored. Fix by only releasing unused caps. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Drop session mutex unconditionally in handle_cap_grant, and do the check_caps from the handle_cap_grant helper. This avoids using a magic return value. Also avoid using a flag variable in the IMPORT case and call check_caps at the appropriate point. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Passing a session pointer to ceph_check_caps() used to mean it would leave the session mutex locked. That wasn't always possible if it wasn't passed CHECK_CAPS_AUTHONLY. If could unlock the passed session and lock a differet session mutex, which was clearly wrong, and also emitted a warning when it a racing CPU retook it and we did an unlock from the wrong context. This was only a problem when there was more than one MDS. First, make ceph_check_caps unconditionally drop the session mutex, so that it is free to lock other sessions as needed. Then adjust the one caller that passes in a session (handle_cap_grant) accordingly. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
If we don't have the exported cap it's because we already released it. No need to WARN. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
This causes an oops when debug output is enabled and we kick an osd request with no current r_osd (sometime after an osd failure). Check the pointer before dereferencing. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Previously we would decode state directly into our current ticket_handler. This is problematic if for some reason we fail to decode, because we end up with half new state and half old state. We are probably already in bad shape if we get an update we can't decode, but we may as well be tidy anyway. Decode into new_* temporaries and update the ticket_handler only on success. Signed-off-by: NSage Weil <sage@newdream.net>
-
- 21 3月, 2010 6 次提交
-
-
由 Sage Weil 提交于
Release the old ticket_blob buffer when we get an updated service ticket from the monitor. Previously these were getting leaked. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
The buffer size was incorrectly calculated for the ceph_x_encrypt() encapsulated ticket blob. Use a helper (with correct arithmetic) and BUG out if we were wrong. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
We were failing to reconnect to services due to an old authenticator, even though we had the new ticket, because we weren't properly retrying the connect handshake, because we were calling an old/incorrect helper that left in_base_pos incorrect. The result was a failure to reconnect to the OSD or MDS (with an authentication error) if the MDS restarted after the service had been up a few hours (long enough for the original authenticator to be invalid). This was only a problem if the AUTH_X authentication was enabled. Now that the 'negotiate' and 'connect' stages are fully separated, we should use the prepare_read_connect() helper instead, and remove the obsolete one. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
When an inode was dropped while being migrated between two MDSs, i_cap_exporting_issued was non-zero such that issue caps were non-zero and __ceph_is_any_caps(ci) was true. This prevented the inode from being removed from the snap realm, even as it was dropped from the cache. Fix this by dropping any residual i_snap_realm ref in destroy_inode. Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
All ci->i_snap_realm_item/realm->inodes_with_caps manipulation should be protected by realm->inodes_with_caps_lock. This bug would have only bit us in a rare race with a realm split (during some snap creations). Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Sage Weil 提交于
Added assertion, and cleared one case where the implemented caps were not following the issued caps. Signed-off-by: NYehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 20 3月, 2010 12 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: serial: sh-sci: remove duplicated #include sh: Export uncached helper symbols. sh: Fix up NUMA build for 29-bit. serial: sh-sci: Fix build failure for non-sh architectures. sh: Fix up uncached offset for legacy 29-bit mode. sh: Support CPU affinity masks for INTC controllers.
-
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb由 Linus Torvalds 提交于
* 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: remove duplicate cpu_to_le16() uwb: declare MODULE_FIRMWARE() in i1480 DFU driver uwb: make USB device id table constant uwb: wlp: refactor wlp_get_<attribute>() macros
-
git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6: alpha: fix compile errors in dma-mapping-common.h alpha: remove trailing spaces in messages alpha: use __ratelimit
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Remove IOMMU_VMERGE config option powerpc: Fix swiotlb to respect the boot option powerpc: Do not call prink when CONFIG_PRINTK is not defined powerpc: Use correct ccr bit for syscall error status powerpc/fsl-booke: Get coherent bit from PTE powerpc/85xx: Make sure lwarx hint isn't set on ppc32
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6由 Linus Torvalds 提交于
* 'zerolen' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: Delete zero-length file drivers/mtd/maps/omap_nor.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty_port,usb-console: Fix usb serial console open/close regression tty: cpm_uart: use resource_size() tty_buffer: Fix distinct type warning hvc_console: Fix race between hvc_close and hvc_remove uartlite: Fix build on sparc. tty: Take a 256 byte padding into account when buffering below sub-page units Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: driver core: numa: fix BUILD_BUG_ON for node_read_distance driver-core: document ERR_PTR() return values kobject: documentation: Update to refer to kset-example.c. sysdev: the cpu probe/release attributes should be sysdev_class_attributes kobject: documentation: Fix erroneous example in kobject doc. driver-core: fix missing kernel-doc in firmware_class Driver core: Early platform kernel-doc update sysfs: fix sysfs lockdep warning in mlx4 code sysfs: fix sysfs lockdep warning in infiniband code sysfs: fix sysfs lockdep warning in ipmi code sysfs: Initialised pci bus legacy_mem field before use sysfs: use sysfs_bin_attr_init in firmware class driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (45 commits) USB: gadget/multi: cdc_do_config: remove redundant check usb: r8a66597-hcd: fix removed from an attached hub USB: xhci: Make endpoint interval debugging clearer. USB: Fix usb_fill_int_urb for SuperSpeed devices USB: cp210x: Remove double usb_control_msg from cp210x_set_config USB: Remove last bit of CONFIG_USB_BERRY_CHARGE USB: gadget: add gadget controller number for s3c-hsotg driver USB: ftdi_sio: Fix locking for change_speed() function USB: g_mass_storage: fixed module name in Kconfig USB: gadget: f_mass_storage::fsg_bind(): fix error handling USB: g_mass_storage: fix section mismatch warnings USB: gadget: fix Blackfin builds after gadget cleansing USB: goku_udc: remove potential null dereference USB: option.c: Add Pirelli VID/PID and indicate Pirelli's modem interface is 0xff USB: serial: Fix module name typo for qcaux Kconfig entry. usb: cdc-wdm: Fix deadlock between write and resume usb: cdc-wdm: Fix order in disconnect and fix locking usb: cdc-wdm:Fix loss of data due to autosuspend usb: cdc-wdm: Fix submission of URB after suspension usb: cdc-wdm: Fix race between disconnect and debug messages ...
-
由 Jeff Garzik 提交于
The content was deleted in cc87edb1, but the file remained as a zero-length file. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (205 commits) ceph: update for write_inode API change ceph: reset osd after relevant messages timed out ceph: fix flush_dirty_caps race with caps migration ceph: include migrating caps in issued set ceph: fix osdmap decoding when pools include (removed) snaps ceph: return EBADF if waiting for caps on closed file ceph: set osd request message front length correctly ceph: reset front len on return to msgpool; BUG on mismatched front iov ceph: fix snaptrace decoding on cap migration between mds ceph: use single osd op reply msg ceph: reset bits on connection close ceph: remove bogus mds forward warning ceph: remove fragile __map_osds optimization ceph: fix connection fault STANDBY check ceph: invalidate_authorizer without con->mutex held ceph: don't clobber write return value when using O_SYNC ceph: fix client_request_forward decoding ceph: drop messages on unregistered mds sessions; cleanup ceph: fix comments, locking in destroy_inode ceph: move dereference after NULL test ... Fix trivial conflicts in Documentation/ioctl/ioctl-number.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: trivial white space [CIFS] checkpatch cleanup cifs: add cifs_revalidate_file cifs: add a CIFSSMBUnixQFileInfo function cifs: add a CIFSSMBQFileInfo function cifs: overhaul cifs_revalidate and rename to cifs_revalidate_dentry
-
- 19 3月, 2010 3 次提交
-
-
由 Peter Korsgaard 提交于
cdc_do_config() had a double ret check after fsg_add(). Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yoshihiro Shimoda 提交于
fix the problem that when a USB hub is attached to the r8a66597-hcd and a device is removed from that hub, it's likely that a kernel panic follows. Reported-by: NMarkus Pietrek <Markus.Pietrek@emtrion.de> Signed-off-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
The xHCI hardware can only handle polling intervals that are a power of two. When we add a new endpoint during a bandwidth allocation, and the polling interval is rounded down to a power of two, print the original polling interval in the endpoint descriptor. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-