Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 4月, 2015 2 次提交
  3. 24 2月, 2015 1 次提交
  5. 19 2月, 2015 4 次提交
  7. 14 2月, 2015 1 次提交
  9. 13 2月, 2015 2 次提交
    • M
      x86/efi: Avoid triple faults during EFI mixed mode calls · 96738c69
      由 Matt Fleming 提交于 
      Andy pointed out that if an NMI or MCE is received while we're in the
middle of an EFI mixed mode call a triple fault will occur. This can
happen, for example, when issuing an EFI mixed mode call while running
perf.

The reason for the triple fault is that we execute the mixed mode call
in 32-bit mode with paging disabled but with 64-bit kernel IDT handlers
installed throughout the call.

At Andy's suggestion, stop playing the games we currently do at runtime,
such as disabling paging and installing a 32-bit GDT for __KERNEL_CS. We
can simply switch to the __KERNEL32_CS descriptor before invoking
firmware services, and run in compatibility mode. This way, if an
NMI/MCE does occur the kernel IDT handler will execute correctly, since
it'll jump to __KERNEL_CS automatically.

However, this change is only possible post-ExitBootServices(). Before
then the firmware "owns" the machine and expects for its 32-bit IDT
handlers to be left intact to service interrupts, etc.

So, we now need to distinguish between early boot and runtime
invocations of EFI services. During early boot, we need to restore the
GDT that the firmware expects to be present. We can only jump to the
__KERNEL32_CS code segment for mixed mode calls after ExitBootServices()
has been invoked.

A liberal sprinkling of comments in the thunking code should make the
differences in early and late environments more apparent.
Reported-by: NAndy Lutomirski <luto@amacapital.net>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      96738c69
    • R
      kernel.h: remove ancient __FUNCTION__ hack · 02f1f217
      由 Rasmus Villemoes 提交于 
      __FUNCTION__ hasn't been treated as a string literal since gcc 3.4, so
this only helps people who only test-compile using 3.3 (compiler-gcc3.h
barks at anything older than that).  Besides, there are almost no
occurrences of __FUNCTION__ left in the tree.

[akpm@linux-foundation.org: convert remaining __FUNCTION__ references]
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      02f1f217
  11. 03 2月, 2015 1 次提交
  13. 16 12月, 2014 2 次提交
  15. 08 12月, 2014 1 次提交
  17. 12 11月, 2014 1 次提交
  19. 03 11月, 2014 1 次提交
  21. 29 10月, 2014 1 次提交
  23. 23 10月, 2014 1 次提交
  25. 20 10月, 2014 2 次提交
  27. 04 10月, 2014 10 次提交
    • M
      x86/efi: Mark initialization code as such · 4e78eb05
      由 Mathias Krause 提交于 
      The 32 bit and 64 bit implementations differ in their __init annotations
for some functions referenced from the common EFI code. Namely, the 32
bit variant is missing some of the __init annotations the 64 bit variant
has.

To solve the colliding annotations, mark the corresponding functions in
efi_32.c as initialization code, too -- as it is such.

Actually, quite a few more functions are only used during initialization
and therefore can be marked __init. They are therefore annotated, too.
Also add the __init annotation to the prototypes in the efi.h header so
users of those functions will see it's meant as initialization code
only.

This patch also fixes the "prelog" typo. ("prologue" / "epilogue" might
be more appropriate but this is C code after all, not an opera! :D)
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      4e78eb05
    • M
      x86/efi: Update comment regarding required phys mapped EFI services · 0ce4605c
      由 Mathias Krause 提交于 
      Commit 3f4a7836 ("x86/efi: Rip out phys_efi_get_time()") left
set_virtual_address_map as the only runtime service needed with a
phys mapping but missed to update the preceding comment. Fix that.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      0ce4605c
    • M
      x86/efi: Unexport add_efi_memmap variable · 60920685
      由 Mathias Krause 提交于 
      This variable was accidentally exported, even though it's only used in
this compilation unit and only during initialization.

Remove the bogus export, make the variable static instead and mark it
as __initdata.

Fixes: 200001eb ("x86 boot: only pick up additional EFI memmap...")
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      60920685
    • L
      x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format() · ace1d121
      由 Laszlo Ersek 提交于 
      An example log excerpt demonstrating the change:

Before the patch:

> efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000009f000) (0MB)
> efi: mem01: type=2, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
> efi: mem02: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000400000) (3MB)
> efi: mem03: type=2, attr=0xf, range=[0x0000000000400000-0x0000000000800000) (4MB)
> efi: mem04: type=10, attr=0xf, range=[0x0000000000800000-0x0000000000808000) (0MB)
> efi: mem05: type=7, attr=0xf, range=[0x0000000000808000-0x0000000000810000) (0MB)
> efi: mem06: type=10, attr=0xf, range=[0x0000000000810000-0x0000000000900000) (0MB)
> efi: mem07: type=4, attr=0xf, range=[0x0000000000900000-0x0000000001100000) (8MB)
> efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000001400000) (3MB)
> efi: mem09: type=2, attr=0xf, range=[0x0000000001400000-0x0000000002613000) (18MB)
> efi: mem10: type=7, attr=0xf, range=[0x0000000002613000-0x0000000004000000) (25MB)
> efi: mem11: type=4, attr=0xf, range=[0x0000000004000000-0x0000000004020000) (0MB)
> efi: mem12: type=7, attr=0xf, range=[0x0000000004020000-0x00000000068ea000) (40MB)
> efi: mem13: type=2, attr=0xf, range=[0x00000000068ea000-0x00000000068f0000) (0MB)
> efi: mem14: type=3, attr=0xf, range=[0x00000000068f0000-0x0000000006c7b000) (3MB)
> efi: mem15: type=6, attr=0x800000000000000f, range=[0x0000000006c7b000-0x0000000006c7d000) (0MB)
> efi: mem16: type=5, attr=0x800000000000000f, range=[0x0000000006c7d000-0x0000000006c85000) (0MB)
> efi: mem17: type=6, attr=0x800000000000000f, range=[0x0000000006c85000-0x0000000006c87000) (0MB)
> efi: mem18: type=3, attr=0xf, range=[0x0000000006c87000-0x0000000006ca3000) (0MB)
> efi: mem19: type=6, attr=0x800000000000000f, range=[0x0000000006ca3000-0x0000000006ca6000) (0MB)
> efi: mem20: type=10, attr=0xf, range=[0x0000000006ca6000-0x0000000006cc6000) (0MB)
> efi: mem21: type=6, attr=0x800000000000000f, range=[0x0000000006cc6000-0x0000000006d95000) (0MB)
> efi: mem22: type=5, attr=0x800000000000000f, range=[0x0000000006d95000-0x0000000006e22000) (0MB)
> efi: mem23: type=7, attr=0xf, range=[0x0000000006e22000-0x0000000007165000) (3MB)
> efi: mem24: type=4, attr=0xf, range=[0x0000000007165000-0x0000000007d22000) (11MB)
> efi: mem25: type=7, attr=0xf, range=[0x0000000007d22000-0x0000000007d25000) (0MB)
> efi: mem26: type=3, attr=0xf, range=[0x0000000007d25000-0x0000000007ea2000) (1MB)
> efi: mem27: type=5, attr=0x800000000000000f, range=[0x0000000007ea2000-0x0000000007ed2000) (0MB)
> efi: mem28: type=6, attr=0x800000000000000f, range=[0x0000000007ed2000-0x0000000007ef6000) (0MB)
> efi: mem29: type=7, attr=0xf, range=[0x0000000007ef6000-0x0000000007f00000) (0MB)
> efi: mem30: type=9, attr=0xf, range=[0x0000000007f00000-0x0000000007f02000) (0MB)
> efi: mem31: type=10, attr=0xf, range=[0x0000000007f02000-0x0000000007f06000) (0MB)
> efi: mem32: type=4, attr=0xf, range=[0x0000000007f06000-0x0000000007fd0000) (0MB)
> efi: mem33: type=6, attr=0x800000000000000f, range=[0x0000000007fd0000-0x0000000007ff0000) (0MB)
> efi: mem34: type=7, attr=0xf, range=[0x0000000007ff0000-0x0000000008000000) (0MB)

After the patch:

> efi: mem00: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000000000-0x000000000009f000) (0MB)
> efi: mem01: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
> efi: mem02: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000400000) (3MB)
> efi: mem03: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000400000-0x0000000000800000) (4MB)
> efi: mem04: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000800000-0x0000000000808000) (0MB)
> efi: mem05: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000808000-0x0000000000810000) (0MB)
> efi: mem06: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000810000-0x0000000000900000) (0MB)
> efi: mem07: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000000900000-0x0000000001100000) (8MB)
> efi: mem08: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001100000-0x0000000001400000) (3MB)
> efi: mem09: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000001400000-0x0000000002613000) (18MB)
> efi: mem10: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000002613000-0x0000000004000000) (25MB)
> efi: mem11: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000004000000-0x0000000004020000) (0MB)
> efi: mem12: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000004020000-0x00000000068ea000) (40MB)
> efi: mem13: [Loader Data        |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000068ea000-0x00000000068f0000) (0MB)
> efi: mem14: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x00000000068f0000-0x0000000006c7b000) (3MB)
> efi: mem15: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c7b000-0x0000000006c7d000) (0MB)
> efi: mem16: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c7d000-0x0000000006c85000) (0MB)
> efi: mem17: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c85000-0x0000000006c87000) (0MB)
> efi: mem18: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006c87000-0x0000000006ca3000) (0MB)
> efi: mem19: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006ca3000-0x0000000006ca6000) (0MB)
> efi: mem20: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006ca6000-0x0000000006cc6000) (0MB)
> efi: mem21: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006cc6000-0x0000000006d95000) (0MB)
> efi: mem22: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000006d95000-0x0000000006e22000) (0MB)
> efi: mem23: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000006e22000-0x0000000007165000) (3MB)
> efi: mem24: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007165000-0x0000000007d22000) (11MB)
> efi: mem25: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007d22000-0x0000000007d25000) (0MB)
> efi: mem26: [Boot Code          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007d25000-0x0000000007ea2000) (1MB)
> efi: mem27: [Runtime Code       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ea2000-0x0000000007ed2000) (0MB)
> efi: mem28: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ed2000-0x0000000007ef6000) (0MB)
> efi: mem29: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ef6000-0x0000000007f00000) (0MB)
> efi: mem30: [ACPI Reclaim Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f00000-0x0000000007f02000) (0MB)
> efi: mem31: [ACPI Memory NVS    |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f02000-0x0000000007f06000) (0MB)
> efi: mem32: [Boot Data          |   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007f06000-0x0000000007fd0000) (0MB)
> efi: mem33: [Runtime Data       |RUN|  |  |  |   |WB|WT|WC|UC] range=[0x0000000007fd0000-0x0000000007ff0000) (0MB)
> efi: mem34: [Conventional Memory|   |  |  |  |   |WB|WT|WC|UC] range=[0x0000000007ff0000-0x0000000008000000) (0MB)

Both the type enum and the attribute bitmap are decoded, with the
additional benefit that the memory ranges line up as well.
Signed-off-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      ace1d121
    • D
      x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode · a5a750a9
      由 Dave Young 提交于 
      If enter virtual mode failed due to some reason other than the efi call
the EFI_RUNTIME_SERVICES bit in efi.flags should be cleared thus users
of efi runtime services can check the bit and handle the case instead of
assume efi runtime is ok.

Per Matt, if efi call SetVirtualAddressMap fails we will be not sure
it's safe to make any assumptions about the state of the system. So
kernel panics instead of clears EFI_RUNTIME_SERVICES bit.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      a5a750a9
    • D
      efi: Add kernel param efi=noruntime · 5ae3683c
      由 Dave Young 提交于 
      noefi kernel param means actually disabling efi runtime, Per suggestion
from Leif Lindholm efi=noruntime should be better. But since noefi is
already used in X86 thus just adding another param efi=noruntime for
same purpose.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      5ae3683c
    • D
      lib: Add a generic cmdline parse function parse_option_str · 6ccc72b8
      由 Dave Young 提交于 
      There should be a generic function to parse params like a=b,c
Adding parse_option_str in lib/cmdline.c which will return true
if there's specified option set in the params.

Also updated efi=old_map parsing code to use the new function
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      6ccc72b8
    • D
      efi: Move noefi early param code out of x86 arch code · b2e0a54a
      由 Dave Young 提交于 
      noefi param can be used for arches other than X86 later, thus move it
out of x86 platform code.
Signed-off-by: NDave Young <dyoung@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      b2e0a54a
    • J
      efi-bgrt: Add error handling; inform the user when ignoring the BGRT · 1282278e
      由 Josh Triplett 提交于 
      Gracefully handle failures to allocate memory for the image, which might
be arbitrarily large.

efi_bgrt_init can fail in various ways as well, usually because the
BIOS-provided BGRT structure does not match expectations.  Add
appropriate error messages rather than failing silently.
Reported-by: NSrihari Vijayaraghavan <linux.bug.reporting@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81321Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      1282278e
    • M
      efi: Add efi= parameter parsing to the EFI boot stub · 5a17dae4
      由 Matt Fleming 提交于 
      We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.

One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.

efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.

There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.

Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      5a17dae4
  29. 27 8月, 2014 2 次提交
    • C
      uv: Replace __get_cpu_var · e1632170
      由 Christoph Lameter 提交于 
      Use __this_cpu_read instead.

Cc: Hedi Berriche <hedi@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      e1632170
    • C
      x86: Replace __get_cpu_var uses · 89cbc767
      由 Christoph Lameter 提交于 
      __get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	__this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	__this_cpu_inc(y)

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Acked-by: NH. Peter Anvin <hpa@linux.intel.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NTejun Heo <tj@kernel.org>
      89cbc767
  31. 09 8月, 2014 1 次提交
  33. 19 7月, 2014 7 次提交