SMB3 servers can respond with MaxTransactSize of more than 4M
that can cause a memory allocation error returned from kmalloc
in a lock codepath. Also the client doesn't support multicredit
requests now and allows buffer sizes of 65536 bytes only. Set
MaxTransactSize to this maximum supported value.

Cc: stable@vger.kernel.org # 3.7+
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Acked-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

It's possible for userland to pass down an iovec via writev() that has a
bogus user pointer in it. If that happens and we're doing an uncached
write, then we can end up getting less bytes than we expect from the
call to iov_iter_copy_from_user. This is CVE-2014-0069

cifs_iovec_write isn't set up to handle that situation however. It'll
blindly keep chugging through the page array and not filling those pages
with anything useful. Worse yet, we'll later end up with a negative
number in wdata->tailsz, which will confuse the sending routines and
cause an oops at the very least.

Fix this by having the copy phase of cifs_iovec_write stop copying data
in this situation and send the last write as a short one. At the same
time, we want to avoid sending a zero-length write to the server, so
break out of the loop and set rc to -EFAULT if that happens. This also
allows us to handle the case where no address in the iovec is valid.

[Note: Marking this for stable on v3.4+ kernels, but kernels as old as
       v2.6.38 may have a similar problem and may need similar fix]

Cc: <stable@vger.kernel.org> # v3.4+
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NSteve French <smfrench@gmail.com>

When mounting with smb2/smb3 (e.g. vers=2.1) and cifsacl mount option,
it was trying to get the mode by querying the acl over the cifs
rather than smb2 protocol.  This patch makes that protocol
independent and makes cifsacl smb2 mounts return a more intuitive
operation not supported error (until we add a worker function
for smb2_get_acl).

Note that a previous patch fixed getxattr/setxattr for the CIFSACL xattr
which would unconditionally call cifs_get_acl and cifs_set_acl (even when
mounted smb2). I made those protocol independent last week (new protocol
version operations "get_acl" and "set_acl" but did not add an
smb2_get_acl and smb2_set_acl yet so those now simply return EOPNOTSUPP
which at least is better than sending cifs requests on smb2 mount)

The previous patches did not fix the one remaining case though ie
mounting with "cifsacl" when getting mode from acl would unconditionally
end up calling "cifs_get_acl_from_fid" even for smb2 - so made that protocol
independent but to make that protocol independent had to make sure that the callers
were passing the protocol independent handle structure (cifs_fid) instead
of cifs specific _u16 network file handle (ie cifs_fid instead of cifs_fid->fid)

Now mount with smb2 and cifsacl mount options will return EOPNOTSUP (instead
of timing out) and a future patch will add smb2 operations (e.g. get_smb2_acl)
to enable this.
Signed-off-by: NSteve French <smfrench@gmail.com>

In the event that a send fails in an uncached write, or we end up
needing to reissue it (-EAGAIN case), we'll kfree the wdata but
the pages currently leak.

Fix this by adding a new kref release routine for uncached writedata
that releases the pages, and have the uncached codepaths use that.

[original patch by Jeff modified to fix minor formatting problems]
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

The cifs_writedata code uses a single element trailing array, which
just adds unneeded complexity. Use a flexarray instead.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Reviewed-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NSteve French <smfrench@gmail.com>

The get/set ACL xattr support for CIFS ACLs attempts to send old
cifs dialect protocol requests even when mounted with SMB2 or later
dialects. Sending cifs requests on an smb2 session causes problems -
the server drops the session due to the illegal request.

This patch makes CIFS ACL operations protocol specific to fix that.

Attempting to query/set CIFS ACLs for SMB2 will now return
EOPNOTSUPP (until we add worker routines for sending query
ACL requests via SMB2) instead of sending invalid (cifs)
requests.

A separate followon patch will be needed to fix cifs_acl_to_fattr
(which takes a cifs specific u16 fid so can't be abstracted
to work with SMB2 until that is changed) and will be needed
to fix mount problems when "cifsacl" is specified on mount
with e.g. vers=2.1
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NShirish Pargaonkar <spargaonkar@suse.com>
CC: Stable <stable@kernel.org>

Changeset 666753c3 added protocol
operations for get/setxattr to avoid calling cifs operations
on smb2/smb3 mounts for xattr operations and this changeset
adds the calls to cifs specific protocol operations for xattrs
(in order to reenable cifs support for xattrs which was
temporarily disabled by the previous changeset.  We do not
have SMB2/SMB3 worker function for setting xattrs yet so
this only enables it for cifs.

CCing stable since without these two small changsets (its
small coreq 666753c3 is
also needed) calling getfattr/setfattr on smb2/smb3 mounts
causes problems.
Signed-off-by: NSteve French <smfrench@gmail.com>
Reviewed-by: NShirish Pargaonkar <spargaonkar@suse.com>
CC: Stable <stable@kernel.org>

Merge a bunch of fixes from Andrew Morton:
 "Commit 579f8290 ("swap: add a simple detector for inappropriate
  swapin readahead") is a feature.  No probs if you decide to defer it
  until the next merge window.

  It has been sitting in my tree for over a year because of my dislike
  of all the magic numbers, but recent discussion with Hugh has made me
  give up"

* emailed patches fron Andrew Morton <akpm@linux-foundation.org>:
  mm: __set_page_dirty uses spin_lock_irqsave instead of spin_lock_irq
  arch/x86/mm/numa.c: fix array index overflow when synchronizing nid to memblock.reserved.
  arch/x86/mm/numa.c: initialize numa_kernel_nodes in numa_clear_kernel_node_hotplug()
  mm: __set_page_dirty_nobuffers() uses spin_lock_irqsave() instead of spin_lock_irq()
  mm/swap: fix race on swap_info reuse between swapoff and swapon
  swap: add a simple detector for inappropriate swapin readahead
  ocfs2: free allocated clusters if error occurs after ocfs2_claim_clusters
  Documentation/kernel-parameters.txt: fix memmap= language

To use spin_{un}lock_irq is dangerous if caller disabled interrupt.
During aio buffer migration, we have a possibility to see the following
call stack.

aio_migratepage  [disable interrupt]
  migrate_page_copy
    clear_page_dirty_for_io
      set_page_dirty
        __set_page_dirty_buffers
          __set_page_dirty
            spin_lock_irq

This mean, current aio migration is a deadlockable.  spin_lock_irqsave
is a safer alternative and we should use it.
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: David Rientjes rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The following path will cause array out of bound.

memblock_add_region() will always set nid in memblock.reserved to
MAX_NUMNODES.  In numa_register_memblks(), after we set all nid to
correct valus in memblock.reserved, we called setup_node_data(), and
used memblock_alloc_nid() to allocate memory, with nid set to
MAX_NUMNODES.

The nodemask_t type can be seen as a bit array.  And the index is 0 ~
MAX_NUMNODES-1.

After that, when we call node_set() in numa_clear_kernel_node_hotplug(),
the nodemask_t got an index of value MAX_NUMNODES, which is out of [0 ~
MAX_NUMNODES-1].

See below:

numa_init()
 |---> numa_register_memblks()
 |      |---> memblock_set_node(memory)		set correct nid in memblock.memory
 |      |---> memblock_set_node(reserved)	set correct nid in memblock.reserved
 |      |......
 |      |---> setup_node_data()
 |             |---> memblock_alloc_nid()	here, nid is set to MAX_NUMNODES (1024)
 |......
 |---> numa_clear_kernel_node_hotplug()
        |---> node_set()			here, we have an index 1024, and overflowed

This patch moves nid setting to numa_clear_kernel_node_hotplug() to fix
this problem.
Reported-by: NDave Jones <davej@redhat.com>
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Tested-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: NDave Jones <davej@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Tested-by: NDave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On-stack variable numa_kernel_nodes in numa_clear_kernel_node_hotplug()
was not initialized.  So we need to initialize it.

[akpm@linux-foundation.org: use NODE_MASK_NONE, per David]
Signed-off-by: NTang Chen <tangchen@cn.fujitsu.com>
Tested-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: NDave Jones <davej@redhat.com>
Reported-by: NDavid Rientjes <rientjes@google.com>
Tested-by: NDave Jones <davej@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

During aio stress test, we observed the following lockdep warning.  This
mean AIO+numa_balancing is currently deadlockable.

The problem is, aio_migratepage disable interrupt, but
__set_page_dirty_nobuffers unintentionally enable it again.

Generally, all helper function should use spin_lock_irqsave() instead of
spin_lock_irq() because they don't know caller at all.

   other info that might help us debug this:
    Possible unsafe locking scenario:

          CPU0
          ----
     lock(&(&ctx->completion_lock)->rlock);
     <Interrupt>
       lock(&(&ctx->completion_lock)->rlock);

    *** DEADLOCK ***

      dump_stack+0x19/0x1b
      print_usage_bug+0x1f7/0x208
      mark_lock+0x21d/0x2a0
      mark_held_locks+0xb9/0x140
      trace_hardirqs_on_caller+0x105/0x1d0
      trace_hardirqs_on+0xd/0x10
      _raw_spin_unlock_irq+0x2c/0x50
      __set_page_dirty_nobuffers+0x8c/0xf0
      migrate_page_copy+0x434/0x540
      aio_migratepage+0xb1/0x140
      move_to_new_page+0x7d/0x230
      migrate_pages+0x5e5/0x700
      migrate_misplaced_page+0xbc/0xf0
      do_numa_page+0x102/0x190
      handle_pte_fault+0x241/0x970
      handle_mm_fault+0x265/0x370
      __do_page_fault+0x172/0x5a0
      do_page_fault+0x1a/0x70
      page_fault+0x28/0x30
Signed-off-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

swapoff clear swap_info's SWP_USED flag prematurely and free its
resources after that.  A concurrent swapon will reuse this swap_info
while its previous resources are not cleared completely.

These late freed resources are:
 - p->percpu_cluster
 - swap_cgroup_ctrl[type]
 - block_device setting
 - inode->i_flags &= ~S_SWAPFILE

This patch clears the SWP_USED flag after all its resources are freed,
so that swapon can reuse this swap_info by alloc_swap_info() safely.

[akpm@linux-foundation.org: tidy up code comment]
Signed-off-by: NWeijie Yang <weijie.yang@samsung.com>
Acked-by: NHugh Dickins <hughd@google.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a patch to improve swap readahead algorithm.  It's from Hugh and
I slightly changed it.

Hugh's original changelog:

swapin readahead does a blind readahead, whether or not the swapin is
sequential.  This may be ok on harddisk, because large reads have
relatively small costs, and if the readahead pages are unneeded they can
be reclaimed easily - though, what if their allocation forced reclaim of
useful pages? But on SSD devices large reads are more expensive than
small ones: if the readahead pages are unneeded, reading them in caused
significant overhead.

This patch adds very simplistic random read detection.  Stealing the
PageReadahead technique from Konstantin Khlebnikov's patch, avoiding the
vma/anon_vma sophistications of Shaohua Li's patch, swapin_nr_pages()
simply looks at readahead's current success rate, and narrows or widens
its readahead window accordingly.  There is little science to its
heuristic: it's about as stupid as can be whilst remaining effective.

The table below shows elapsed times (in centiseconds) when running a
single repetitive swapping load across a 1000MB mapping in 900MB ram
with 1GB swap (the harddisk tests had taken painfully too long when I
used mem=500M, but SSD shows similar results for that).

Vanilla is the 3.6-rc7 kernel on which I started; Shaohua denotes his
Sep 3 patch in mmotm and linux-next; HughOld denotes my Oct 1 patch
which Shaohua showed to be defective; HughNew this Nov 14 patch, with
page_cluster as usual at default of 3 (8-page reads); HughPC4 this same
patch with page_cluster 4 (16-page reads); HughPC0 with page_cluster 0
(1-page reads: no readahead).

HDD for swapping to harddisk, SSD for swapping to VertexII SSD.  Seq for
sequential access to the mapping, cycling five times around; Rand for
the same number of random touches.  Anon for a MAP_PRIVATE anon mapping;
Shmem for a MAP_SHARED anon mapping, equivalent to tmpfs.

One weakness of Shaohua's vma/anon_vma approach was that it did not
optimize Shmem: seen below.  Konstantin's approach was perhaps mistuned,
50% slower on Seq: did not compete and is not shown below.

HDD        Vanilla Shaohua HughOld HughNew HughPC4 HughPC0
Seq Anon     73921   76210   75611   76904   78191  121542
Seq Shmem    73601   73176   73855   72947   74543  118322
Rand Anon   895392  831243  871569  845197  846496  841680
Rand Shmem 1058375 1053486  827935  764955  764376  756489

SSD        Vanilla Shaohua HughOld HughNew HughPC4 HughPC0
Seq Anon     24634   24198   24673   25107   21614   70018
Seq Shmem    24959   24932   25052   25703   22030   69678
Rand Anon    43014   26146   28075   25989   26935   25901
Rand Shmem   45349   45215   28249   24268   24138   24332

These tests are, of course, two extremes of a very simple case: under
heavier mixed loads I've not yet observed any consistent improvement or
degradation, and wider testing would be welcome.

Shaohua Li:

Test shows Vanilla is slightly better in sequential workload than Hugh's
patch.  I observed with Hugh's patch sometimes the readahead size is
shrinked too fast (from 8 to 1 immediately) in sequential workload if
there is no hit.  And in such case, continuing doing readahead is good
actually.

I don't prepare a sophisticated algorithm for the sequential workload
because so far we can't guarantee sequential accessed pages are swap out
sequentially.  So I slightly change Hugh's heuristic - don't shrink
readahead size too fast.

Here is my test result (unit second, 3 runs average):
	Vanilla		Hugh		New
Seq	356		370		360
Random	4525		2447		2444

Attached graph is the swapin/swapout throughput I collected with 'vmstat
2'.  The first part is running a random workload (till around 1200 of
the x-axis) and the second part is running a sequential workload.
swapin and swapout throughput are almost identical in steady state in
both workloads.  These are expected behavior.  while in Vanilla, swapin
is much bigger than swapout especially in random workload (because wrong
readahead).

Original patches by: Shaohua Li and Konstantin Khlebnikov.

[fengguang.wu@intel.com: swapin_nr_pages() can be static]
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NShaohua Li <shli@fusionio.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Even if using the same jbd2 handle, we cannot rollback a transaction.
So once some error occurs after successfully allocating clusters, the
allocated clusters will never be used and it means they are lost.  For
example, call ocfs2_claim_clusters successfully when expanding a file,
but failed in ocfs2_insert_extent.  So we need free the allocated
clusters if they are not used indeed.
Signed-off-by: NZongxun Wang <wangzongxun@huawei.com>
Signed-off-by: NJoseph Qi <joseph.qi@huawei.com>
Acked-by: NJoel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clean up descriptions of memmap= boot options.

Add periods (full stops), drop commas, change "used" to "reserved" or
"marked".
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Andiry Xu <andiry.xu@gmail.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull sound fixes from Takashi Iwai:
 "A few HD-audio fixes and one USB-audio kconfig dependency fix.  All
  small and device-specific changes marked with Cc to stable"

* tag 'sound-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Improve loopback path lookups for AD1983
  ALSA: hda - Fix missing VREF setup for Mac Pro 1,1
  ALSA: hda - Add missing mixer widget for AD1983
  ALSA: hda/realtek - Avoid invalid COEFs for ALC271X
  ALSA: hda - Fix silent output on Toshiba Satellite L40
  ALSA: usb-audio: Add missing kconfig dependecy

Pull drm fixes from Dave Airlie:
 "A few regression fixes already, one for my own stupidity, and mgag200
  typo fix, vmwgfx fixes and ttm regression fixes, and a radeon register
  checker update for older cards to handle geom shaders"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon: allow geom rings to be setup on r600/r700 (v2)
  drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversion
  drm/ttm: Don't clear page metadata of imported sg pages
  drm/ttm: Fix TTM object open regression
  vmwgfx: Fix unitialized stack read in vmw_setup_otable_base
  drm/vmwgfx: Reemit context bindings when necessary v2
  drm/vmwgfx: Detect old user-space drivers and set up legacy emulation v2
  drm/vmwgfx: Emulate legacy shaders on guest-backed devices v2
  drm/vmwgfx: Fix legacy surface reference size copyback
  drm/vmwgfx: Fix SET_SHADER_CONST emulation on guest-backed devices
  drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"
  drm/vmwgfx: Don't commit staged bindings if execbuf fails
  drm/mgag200: fix typo causing bw limits to be ignored on some chips

the evergreen CS parser has allowed this for a while, just port
the code to the r600 one.

This is required before geom shaders can be made work.

v2: agd5f: minor cleanup and add additional 7xx reg.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'vmwgfx-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux into drm-next

A couple of vmwgfx fixes together with missing bits of legacy device
emulation to facilitate old user-space drivers on new devices.

The shader emulation bits are a bit large, but since they mostly touch the
new device code, regressions are unlikely. I figure the gain of having
this from the start clearly outweighs the risc of adding these bits at
this point.

Pull request of 2014-02-05

* tag 'vmwgfx-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux:
  vmwgfx: Fix unitialized stack read in vmw_setup_otable_base
  drm/vmwgfx: Reemit context bindings when necessary v2
  drm/vmwgfx: Detect old user-space drivers and set up legacy emulation v2
  drm/vmwgfx: Emulate legacy shaders on guest-backed devices v2
  drm/vmwgfx: Fix legacy surface reference size copyback
  drm/vmwgfx: Fix SET_SHADER_CONST emulation on guest-backed devices
  drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"
  drm/vmwgfx: Don't commit staged bindings if execbuf fails

Two ttm regression fixes.

Pull request of 2014-02-05

* tag 'ttm-fixes-3.14-2014-02-05' of git://people.freedesktop.org/~thomash/linux:
  drm/ttm: Don't clear page metadata of imported sg pages
  drm/ttm: Fix TTM object open regression

I totally sign inverted my way out of this one.

Cc: stable@vger.kernel.org
Reported-by: N"Sabrina Dubroca" <sd@queasysnail.net>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Pull irq updates from Thomas Gleixner:
 "This lot provides:

   * Bugfixes for armada irq controller
   * Updates to renesas irq chip
   * Support for the TI-NSPIRE irq controller

  Not strictly a bug fix only pull request, but important updates for
  some of the arm Socs which I completely forgot to send last week.

  Seems like my obliviousness is getting worse, I just can't remember
  when it started"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: Add support for TI-NSPIRE irqchip
  irqchip: renesas-irqc: Enable mask on suspend
  irqchip: renesas-irqc: Use lazy disable
  irqchip: armada-370-xp: fix MSI race condition
  irqchip: armada-370-xp: fix IPI race condition

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "Bug-fixes:
   - Revert "xen/grant-table: Avoid m2p_override during mapping" as it
     broke Xen ARM build.
   - Fix CR4 not being set on AP processors in Xen PVH mode"

* tag 'stable/for-linus-3.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pvh: set CR4 flags for APs
  Revert "xen/grant-table: Avoid m2p_override during mapping"

Pull ia64 update from Tony Luck:
 "Wire up new sched_setattr and sched_getattr syscalls"

* tag 'please-pull-ia64-syscalls' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Wire up new sched_setattr and sched_getattr syscalls

Pull NVMe driver update from Matthew Wilcox:
 "Looks like I missed the merge window ...  but these are almost all
  bugfixes anyway (the ones that aren't have been baking for months)"

* git://git.infradead.org/users/willy/linux-nvme:
  NVMe: Namespace use after free on surprise removal
  NVMe: Correct uses of INIT_WORK
  NVMe: Include device and queue numbers in interrupt name
  NVMe: Add a pci_driver shutdown method
  NVMe: Disable admin queue on init failure
  NVMe: Dynamically allocate partition numbers
  NVMe: Async IO queue deletion
  NVMe: Surprise removal handling
  NVMe: Abort timed out commands
  NVMe: Schedule reset for failed controllers
  NVMe: Device resume error handling
  NVMe: Cache dev->pci_dev in a local pointer
  NVMe: Fix lockdep warnings
  NVMe: compat SG_IO ioctl
  NVMe: remove deprecated IRQF_DISABLED
  NVMe: Avoid shift operation when writing cq head doorbell

Pull regulator fixes from Mark Brown:
 "A couple of driver fixes here but the main thing is a fix to the
  checks for deferred probe non-DT systems with fully specified
  regulators which had been broken by a device tree fix which meant that
  we wouldn't insert optional regulators.

  This had slipped through the cracks since very few systems do that in
  the first place and those that do it in mainline don't need optional
  regulators anyway"

* tag 'regulator-v3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: s2mps11: Fix NULL pointer of_node value when using platform data
  regulator: core: Correct default return value for full constraints
  regulator: ab3100: cast fix

Pull crypto fixes from Herbert Xu:
 "This fixes a number of concurrency issues on s390 where multiple users
  of the same crypto transform may clobber each other's results"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: s390 - fix des and des3_ede ctr concurrency issue
  crypto: s390 - fix des and des3_ede cbc concurrency issue
  crypto: s390 - fix concurrency issue in aes-ctr mode

It can take some time to validate the image, make sure
{allyes|allmod}config doesn't enable it.

I'd say randconfig will cover it often enough, and the failure is also
borderline build coverage related: you cannot really make the decoder
test fail via source level changes, only with changes in the build
environment, so I agree with Andi that we can disable this one too.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Acked-by: Paul Gortmaker paul.gortmaker@windriver.com>
Suggested-and-acked-by: Andi Kleen andi@firstfloor.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes 'do_execve()' to get the executable name as a 'struct
filename', and to free it when it is done.  This is what the normal
users want, and it simplifies and streamlines their error handling.

The controlled lifetime of the executable name also fixes a
use-after-free problem with the trace_sched_process_exec tracepoint: the
lifetime of the passed-in string for kernel users was not at all
obvious, and the user-mode helper code used UMH_WAIT_EXEC to serialize
the pathname allocation lifetime with the execve() having finished,
which in turn meant that the trace point that happened after
mm_release() of the old process VM ended up using already free'd memory.

To solve the kernel string lifetime issue, this simply introduces
"getname_kernel()" that works like the normal user-space getname()
function, except with the source coming from kernel memory.

As Oleg points out, this also means that we could drop the tcomm[] array
from 'struct linux_binprm', since the pathname lifetime now covers
setup_new_exec().  That would be a separate cleanup.
Reported-by: NIgor Zhbanov <i.zhbanov@samsung.com>
Tested-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

These page pointers shouldn't be visible to TTM in the first place, but
until we fix that up, don't clear the page metadata because that
will upset the exporter.
Reported-and-tested-by: NCristoph Haag <haagch.christoph@googleemail.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Commit drm/ttm: ttm object security fixes for render nodes introduced a
regression where, if a TTM object was opened multiple times from the same
open file, the caller would spin uninterruptibly in the kernel.

Fix this.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

One of the error paths in vmw_setup_otable_base causes us to return with
'ret' having never been set to anything causing us to return whatever was
on the stack.

Found with Coverity
Signed-off-by: NDave Jones <davej@fedoraproject.org>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

AD1983 has flexible loopback routes and the generic parser would take
wrong path confusingly instead of taking individual paths via NID 0x0c
and 0x0d.  For avoiding it, limit the connections at these widgets so
that the parser can think more straightforwardly.  This fixes the
regression of the missing line-in loopback on Dell machine.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70011
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a context is first referenced in the command stream, make sure that all
scrubbed (as a result of eviction) bindings are re-emitted. Also make sure that
all bound resources are put on the resource validate list.

This is needed for legacy emulation, since legacy user-space drivers will
typically not re-emit shader bindings. It also removes the requirement for
user-space drivers to re-emit render-target- and texture bindings.

Makes suspend and hibernate now also work with legacy user-space drivers on
guest-backed devices.

v2: Don't rebind on legacy devices.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

GB aware mesa userspace drivers are detected by the fact that they are
calling the vmw getparam ioctl querying DRM_VMW_PARAM_HW_CAPS to detect
whether the device is Guest-backed object capable. For other drivers,
lie about hardware version and send the 3D capabilities in a format they
expect.

v2:
Use DRM_VMW_PARAM_MAX_MOB_MEMORY to detect gb awareness,
Make sure we don't ovwerwrite bounce buffer or write past user-space buffer
indicated size.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Command stream legacy shader creation and destruction is replaced by
NOPs in the command stream, and instead guest-backed shaders are created
and destroyed as part of the command validation process.

v2: Removed some stray debug messages.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Surfaces created using the guest-backed surface interface only keeps the
base mip size, so only copy that if the legacy surface reference
ioctl requests the size information.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Emulate the SET_SHADER_CONST legacy command on guest-backed devices by
issuing a SET_GB_SHADERCONSTS_INLINE command.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"

The call to ttm_eu_backoff_reservation() as part of an error path would cause
a lock imbalance if the reservation ticket was not initialized. This error is
easily triggered from user-space by submitting a bogus command stream.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>