The Xen setup code needs to call memblock_x86_reserve_range() very early,
so allow it to initialize the memblock subsystem before doing so.  The
second memblock_init() is ignored.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
LKML-Reference: <4CACFDAD.3090900@goop.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

Fix typo in commit dbe3039e ("memblock/arm: Use memblock_region_is_memory()
for omap fb") - it should be memblock_is_region_memory().
Reported-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: ext Grazvydas Ignotas <notasas@gmail.com>
LKML-Reference: <4CABFADA.9020305@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Fold it into memblock_x86_find_in_range(), and change bad_addr_size()
to check_reserve_memblock().

So whole memblock_x86_find_in_range_size() code is more readable.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CAA4DEC.4000401@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Originally the only early reserved range that is overlapped with high
pages is "KVA RAM", but we already do remove that from the active ranges.

However, It turns out Xen could have that kind of overlapping to support memory
ballooning.x

So we need to make add_highpage_with_active_regions() to subtract
memblock reserved just like low ram; this is the proper design anyway.

In this patch, refactering get_freel_all_memory_range() to make it can
be used by add_highpage_with_active_regions().  Also we don't need to
remove "KVA RAM" from active ranges.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABB183.1040607@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Cai Qian found crashkernel is broken with the x86 memblock changes.

1. crashkernel=128M@32M always reported that range is used, even if
   the first kernel is small and does not usethat range

2. we always got following report when using "kexec -p"
	Could not find a free area of memory of a000 bytes...
	locate_hole failed

The root cause is that generic memblock_find_in_range() will try to
allocate from the top of the range, whereas the kexec code was written
assuming that allocation was always near the bottom and that it could
blindly extend memory upward.  Unfortunately the kexec code doesn't
have a system for requesting the range that it really needs, so this
is subject to probabilistic failures.

This patch hacks around the problem by limiting the target range
heuristically to below the traditional bzImage max range.  This number
is arbitrary and not always correct, and a much better result would be
obtained by having kexec communicate this number based on the kernel
header information and any appropriate command line options.
Reported-and-Bisected-by: NCAI Qian <caiqian@redhat.com>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4CABAF2A.5090501@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Since powerpc uses -Werror on arch powerpc, the build was broken like
this:

  cc1: warnings being treated as errors
  arch/powerpc/kernel/module.c: In function 'module_finalize':
  arch/powerpc/kernel/module.c:66: error: unused variable 'err'
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With all the recent module loading cleanups, we've minimized the code
that sits under module_mutex, fixing various deadlocks and making it
possible to do most of the module loading in parallel.

However, that whole conversion totally missed the rather obscure code
that adds a new module to the list for BUG() handling.  That code was
doubly obscure because (a) the code itself lives in lib/bugs.c (for
dubious reasons) and (b) it gets called from the architecture-specific
"module_finalize()" rather than from generic code.

Calling it from arch-specific code makes no sense what-so-ever to begin
with, and is now actively wrong since that code isn't protected by the
module loading lock any more.

So this commit moves the "module_bug_{finalize,cleanup}()" calls away
from the arch-specific code, and into the generic code - and in the
process protects it with the module_mutex so that the list operations
are now safe.

Future fixups:
 - move the module list handling code into kernel/module.c where it
   belongs.
 - get rid of 'module_bug_list' and just use the regular list of modules
   (called 'modules' - imagine that) that we already create and maintain
   for other reasons.
Reported-and-tested-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Adrian Bunk <bunk@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

if !xen_have_vector_callback do not initialize PV timer unconditionally
because we still don't know how many cpus are available and if there is
more than one we won't be able to receive the timer interrupts on
cpu > 0.

This patch fixes an hang at boot when Xen does not support vector
callbacks and the guest has multiple vcpus.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>

It is an early_initcall, so it should be in __init memory.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1593/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The notifiers may be called at any time, so the notifier_block cannot
be in init memory.
Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1592/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Fix VMLINUZ_LOAD_ADDRESS calculation to be based on the length of
vmlinux.bin, the actual uncompressed kernel binary.

Previously it was based on the length of KBUILD_IMAGE (the unstripped ELF
vmlinux), which is bigger than vmlinux.bin.  As a result, vmlinuz was
loaded into a memory address higher then actually needed - a problem for
small memory platforms.
Signed-off-by: NShmulik Ladkani <shmulik.ladkani@gmail.com>
To: linux-mips@linux-mips.org
Cc: alex@digriz.org.uk
Cc: manuel.lauss@googlemail.com
Cc: sam@ravnborg.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1564/Acked-by: NWu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The function prom_init_cmdline() references the variable __initdata
arcs_cmdline.

The function prom_get_ethernet_addr() references the variable __initdata
arcs_cmdline.

Annotate prom_init_cmdline() as __init, unexport and annotate
prom_get_ethernet_addr() since it's no longer called from within
driver code.
Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1547/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Noticed and original patch by Philby John <pjohn@mvista.com>.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NDavid Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1553/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Architectures need to set ARCH_DMA_MINALIGN to the minimum DMA
alignment (commit a6eb9fe1). Defining
ARCH_KMALLOC_MINALIGN doesn't work anymore.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: anemo@mba.ocn.ne.jp
Patchwork: https://patchwork.linux-mips.org/patch/1544/Acked-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Commit 31c984a5 introduced a new syscall
getdents64. However, in the syscall table, the new syscall still refers to
the old getdents which doesn't work.

The problem appeared with a system that uses the eglibc 2.12-r11187 (that
utilizes that new syscall) is very confused. The fix has been tested with
that eglibc version.
Signed-off-by: NBernhard Walle <walle@corscience.de>
To: linux-mips@linux-mips.org
Cc: ddaney@caviumnetworks.com
Cc: akpm@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1567/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

These would result in KERN_<level> actually getting printed.
Signed-off-by: NJoe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1581/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

No rubbish printks - those belong to userspace.  The halt function now
actually halts the system and the poweroff function was deleted because
it didn't actually power down the system.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This prevents the GIC code from being reusable sanely.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Only VSMP was known as SMVP and generally the help text was too short to
be helpful.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This only matters for ISA devices with a 24-bit DMA limit or for devices
with a 32-bit DMA limit on systems with ZONE_DMA32 enabled.  The latter
currently only affects 32-bit PCI cards on Sibyte-based systems with more
than 1GB RAM installed.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

_TIF_WORK_MASK false had _TIF_SYSCALL_AUDIT set.  If a thread's
_TIF_SYSCALL_AUDIT is ever set this will lead to an endless loop on the
way out from a syscall.

Currently this is only a theoretic bug as init/Kconfig doesn't allow
AUDIT_SYSCALL to be enabled for MIPS.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This patch adds an config switch to determine if we need to build some
workaround helper files.

The staging driver octeon-ethernet references some symbols which are only
built when PCI is enabled. The new config switch enables these symbols in
bothe cases.
Signed-off-by: NAndreas Bießmann <biessmann@corscience.de>
To: linux-kernel@vger.kernel.org
Cc: Andreas Bießmann <biessmann@corscience.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1543/Acked-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The 64-bit kernel has already had its atomic64 functions. Except for that,
we use the generic spinlocked version. The atomic64 types and related
functions are needed for the Linux performance counter subsystem.
Signed-off-by: NDeng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: jamie.iles@picochip.com
Patchwork: https://patchwork.linux-mips.org/patch/1361/Acked-by: NDavid Daney <ddaney@caviumnetworks.com>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRicardo Mendoza <ricmm@gentoo.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1540/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Indent the branch of an if.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r disable braces4@
position p1,p2;
statement S1,S2;
@@

(
if (...) { ... }
|
if (...) S1@p1 S2@p2
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

if (p1[0].column == p2[0].column):
  cocci.print_main("branch",p1)
  cocci.print_secs("after",p2)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
To: kernel-janitors@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1539/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

"Userpace" -> "Userspace"
Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Martin Hicks <mort@sgi.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1536/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

flush_icache_range() is given virtual addresses to describe the region.  It
deals with these by attempting to translate them through the current set of
page tables.

This is fine for userspace memory and vmalloc()'d areas as they are governed by
page tables.  However, since the regions above 0x80000000 aren't translated
through the page tables by the MMU, the kernel doesn't bother to set up page
tables for them (see paging_init()).

This means flush_icache_range() as it stands cannot be used to flush regions of
the VM area between 0x80000000 and 0x9fffffff where the kernel resides if the
data cache is operating in WriteBack mode.

To fix this, make flush_icache_range() first check for addresses in the upper
half of VM space and deal with them appropriately, before dealing with any
range in the page table mapped area.

Ordinarily, this is not a problem, but it has the capacity to make kprobes and
kgdb malfunction.  It should not affect gdbstub, signal frame setup or module
loading as gdb has its own flush functions, and the others take place in the
page table mapped area only.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the warnings

  arch/m68k/mac/macboing.c: In function 'mac_mksound':
  arch/m68k/mac/macboing.c:189: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c:211: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c: In function 'mac_quadra_start_bell':
  arch/m68k/mac/macboing.c:241: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c:263: warning: comparison of distinct pointer types lacks a cast
  arch/m68k/mac/macboing.c: In function 'mac_quadra_ring_bell':
  arch/m68k/mac/macboing.c:283: warning: comparison of distinct pointer types lacks a cast

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

create_irq() returns -1 if the interrupt allocation failed, but the
code checks for irq == 0.

Use create_irq_nr() instead.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Venkatesh Pallipadi <venki@google.com>
LKML-Reference: <alpine.LFD.2.00.1009282310360.2416@localhost6.localdomain6>
Cc: stable@kernel.org
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

free_irq_cfg() is not freeing the cpumask_vars in irq_cfg. Fixing this
triggers a use after free caused by the fact that copying struct
irq_cfg is done with memcpy, which copies the pointer not the cpumask.

Fix both places.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
LKML-Reference: <alpine.LFD.2.00.1009282052570.2416@localhost6.localdomain6>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

If acpi_evaluate_object() function call doesn't fail, we must kfree()
output.buffer before returning from pcc_cpufreq_do_osc().
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NDave Jones <davej@redhat.com>

acpi_perf_data is a percpu pointer but was missing __percpu markup.
Add it.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDave Jones <davej@redhat.com>

Commit c52c2ddc ("alpha: switch osf_sigprocmask() to use of
sigprocmask()") had several problems.  The more obvious compile issues
got fixed in commit 0f44fbd2 ("alpha: fix compile problem in
arch/alpha/kernel/signal.c"), but it also caused a regression.

Since _BLOCKABLE is already the set of signals that can be blocked, the
code should do "newmask & _BLOCKABLE" rather than inverting _BLOCKABLE
before masking.
Reported-by: NMichael Cree <mcree@orcon.net.nz>
Patch-by: NAl Viro <viro@zeniv.linux.org.uk>
Patch-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Stephane reported we've forgot to guard the P4 platform
against spurious in-flight performance IRQs. Fix it.

This fixes potential spurious 'dazed and confused' NMI
messages.
Reported-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NDon Zickus <dzickus@redhat.com>
Cc: fweisbec@gmail.com
Cc: peterz@infradead.org
Cc: Robert Richter <robert.richter@amd.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <1285815698-4298-1-git-send-email-dzickus@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch fixes a resource leak on failure, where the
oprofilefs and some counters may not released properly.
Signed-off-by: NRobert Richter <robert.richter@amd.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@kernel.org> # .35.x
LKML-Reference: <20100929145225.GJ13563@erda.amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

uml_net_set_mac() was broken and luckily it was never used, before.
What it was trying to do is spin_lock before memcopy the mac address.
Linus attempted to fix it in assumption that someone decided the
lock was needed. But since it was never ever used at all, and was
just dead code, I think we can assume that it is not needed, after
all.

On the other hand patch [f25c80a4] was trying to use eth_mac_addr()
in eth_configure(), *which was the real fallout*. Because of state
checks done inside eth_mac_addr() the address was never set. I have
not reintroduced the memcpy wrapper, but I've put a comment for future
cats.

The code now is back to exactly as it was before [f25c80a4]. With
the cleanup applied. If the spin_lock is indeed needed then a contender
should supply a test case that fails, then fix it with the proper
locking, as a separate unrelated patch.

CC: Julia Lawall <julia@diku.dk>
CC: David S. Miller <davem@davemloft.net>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Al Viro <viro@ZenIV.linux.org.uk>
Tested-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

cpu_cstate_entry is a percpu pointer
but was missing __percpu markup.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

When caching is disabled on the MN10300 arch, the sys_cacheflush()
function is removed by conditional stuff in the makefiles, but is still
referred to by the syscall table.

Provide a null version that just returns 0 when caching is disabled (or
-EINVAL if the arguments are silly).
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>