- 09 12月, 2009 6 次提交
-
-
由 Joakim Tjernlund 提交于
There is no need to do set the DIRTY bit directly in DTLB Error. Trap to do_page_fault() and let the generic MM code do the work. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
8xx has not had WRITETHRU due to lack of bits in the pte. After the recent rewrite of the 8xx TLB code, there are two bits left. Use one of them to WRITETHRU. Perhaps use the last SW bit to PAGE_SPECIAL or PAGE_FILE? Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
only DTLB Miss did set this bit, DTLB Error needs too otherwise the setting is lost when the page becomes dirty. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
This is an assembler version to fixup DAR not being set by dcbX, icbi instructions. There are two versions, one uses selfmodifing code, the other uses a jump table but is much bigger(default). Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
dcbz, dcbf, dcbi, dcbst and icbi do not set DAR when they cause a DTLB Error. Dectect this by tagging DAR with 0x00f0 at every exception exit that modifies DAR. Test for DAR=0x00f0 in DataTLBError and bail to handle_page_fault(). Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Joakim Tjernlund 提交于
Update the TLB asm to make proper use of _PAGE_DIRY and _PAGE_ACCESSED. Get rid of _PAGE_HWWRITE too. Pros: - I/D TLB Miss never needs to write to the linux pte. - _PAGE_ACCESSED is only set on TLB Error fixing accounting - _PAGE_DIRTY is mapped to 0x100, the changed bit, and is set directly when a page has been made dirty. - Proper RO/RW mapping of user space. - Free up 2 SW TLB bits in the linux pte(add back _PAGE_WRITETHRU ?) - kernel RO/user NA support. Cons: - A few more instructions in the TLB Miss routines. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 20 8月, 2009 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The kernel uses SPRG registers for various purposes, typically in low level assembly code as scratch registers or to hold per-cpu global infos such as the PACA or the current thread_info pointer. We want to be able to easily shuffle the usage of those registers as some implementations have specific constraints realted to some of them, for example, some have userspace readable aliases, etc.. and the current choice isn't always the best. This patch should not change any code generation, and replaces the usage of SPRN_SPRGn everywhere in the kernel with a named replacement and adds documentation next to the definition of the names as to what those are used for on each processor family. The only parts that still use the original numbers are bits of KVM or suspend/resume code that just blindly needs to save/restore all the SPRGs. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 4月, 2009 1 次提交
-
-
由 Tim Abbott 提交于
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: NTim Abbott <tabbott@mit.edu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 3月, 2008 1 次提交
-
-
由 Vitaly Bordug 提交于
This makes swap routines operate correctly on the ppc_8xx based machines. Code has been revalidated on mpc885ads (8M sdram) with recent kernel. Based on patch from Yuri Tikhonov <yur@emcraft.com> to do the same on arch/ppc instance. Recent kernel's size makes swap feature very important on low-memory platforms, those are actually non-operable without it. Signed-off-by: NYuri Tikhonov <yur@emcraft.com> Signed-off-by: NVitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 04 10月, 2007 2 次提交
-
-
由 Scott Wood 提交于
The CPU15 erratum on MPC8xx chips can cause incorrect code execution under certain circumstances, where there is a conditional or indirect branch in the last word of a page, with a target in the last cache line of the next page. This patch implements one of the suggested workarounds, by forcing a TLB miss whenever execution crosses a page boundary. This is done by invalidating the pages before and after the one being loaded into the TLB in the ITLB miss handler. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
1. Move CONSISTENT_START on 8xx so that it doesn't overlap the IMMR mapping. 2. The wrong register was being loaded into SPRN_MD_RPN. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 19 9月, 2007 1 次提交
-
-
由 Stephen Rothwell 提交于
It is just a C char array, so declare it thusly. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 14 9月, 2007 1 次提交
-
-
由 Kumar Gala 提交于
We get warnings like the following from the various ppc32 head*.S files: WARNING: vmlinux.o(.text+0x358): Section mismatch: reference to .init.text:early_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x380): Section mismatch: reference to .init.text:machine_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x384): Section mismatch: reference to .init.text:MMU_init (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3aa): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') WARNING: vmlinux.o(.text+0x3ae): Section mismatch: reference to .init.text:start_kernel (between 'skpinv' and 'interrupt_base') Added a .text.head section simliar to what other architectures do since modpost already excludes this from its warnings. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 10 2月, 2006 1 次提交
-
-
由 Jon Mason 提交于
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 28 10月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
... for consistency with 64-bit. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 01 10月, 2005 1 次提交
-
-
由 Stephen Rothwell 提交于
Use idle_power4.S from ppc64 as we are not going to support 32 bit power4 in the merged tree. Merge ppc64 traps.c into powerpc traps.c: use ppc64 versions of exception routine names (as they don't have StudlyCaps) make all the versions if die() have the same prototype Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
-
- 26 9月, 2005 1 次提交
-
-
由 Paul Mackerras 提交于
This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 10 9月, 2005 1 次提交
-
-
由 Sam Ravnborg 提交于
Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 28 7月, 2005 1 次提交
-
-
由 Marcelo Tosatti 提交于
On PPC 8xx, the DataTLBMiss handler does not jump directly to the page fault handler, as was the case in v2.4. It instead loads an invalid TLB which causes a subsequent DataTLBError exception. The comment on top of it haven't been update to reflect the change, though. Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-