It contains the public netlink interface bits required by userspace to
make use of the interface.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Kills the FLOW_BUFSIZE constant which needs to be calculated manually
and replaces it with key_attr_size() based on nla_total_size().
Calculates the size of datapath messages instead of relying on
NLMSG_DEFAULT_SIZE and moves the existing message size calculations
into own functions for clarity.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Less error prone as it takes into account the length of both the
destination buffer and the source attribute and documents when
data is copied from an attribute.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Specifying the minimal length in the policy makes it reuseable
and documents the interface.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o VFs might get scheduled out after sending a command to a PF
  and scheduled in after receiving a response. Implement a
  worker thread to handle atomic commands.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Add support for commands from VF to PF.
o PF validates the commands sent by the VF before sending
  it to adapter.
o vPort is a container of resources. PF creates vPort
  for VFs and attach resources to it. vPort is
  transparent to the VF.
o Separate 83xx TX and RX hardware resource cleanup from 82xx.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Adapter provides communication channel between VF and PF.
  Any control commands from the VF driver are sent to the PF driver
  through this communication channel. PF driver validates the
  commands before sending them to the adapter. Similarly PF driver
  forwards any control command responses  to the VF driver
  through this communication channel.  Adapter sends message pending
  event to VF or PF when there is an outstanding response or a command
  for VF or PF respectively. When a command or a response is sent over
  a channel VF or PF cannot send another command or a response
  until adapter sends a channel free event. Adapter allocates 1K area to
  VF and  PF each for this communication.
o Commands and  responses are encapsulated in a header. Header determines
  sequence id, number of fragments, fragment number etc.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o VF will use shared MSI-X interrupt vector for Tx and Rx.
o When QLCNIC_INTR_SHARED flag is set Tx and Rx will
  share MSI-X interrupt vector. Tx will use a separate
  MSI-X interrupt vector from Rx otherwise.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Add PCI device entry for VF.
o Add HW operations for VF.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

o Add QLCNIC_SRIOV to Kconfig.
o Provide PCI sysfs hooks to enable and disable SR-IOV.
o Allow enabling only when CONFIG_QLCNIC_SRIOV is defined.
o qlcnic_sriov_pf.c has all the PF related SR-IOV
  functionality.
o qlcnic_sriov_common.c has VF functionality and SR-IOV
  functionality which is common between VF and PF.
o qlcnic_sriov.h is a common header file for SR-IOV defines.
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The CONFIG_ARCH_IXDP2X01 and CONFIG_MACH_IXDP2351 Kconfig macros are
unused since the ixp23xx and ixp2000 platforms were removed in v3.5. So
remove the last code still depending on these macros. And since
CS89x0_NONISA_IRQ was only set if either of these two macros was defined
we can also remove that macro and the code depending on it.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit d0418bb7 (net: sh_eth: Add eth support
for R8A7779 device) was a failed attempt to add support for one of members of
the R-Car SoC family.  That's for three reasons: it treated R8A7779 the  same
as SH7724 except including quite dirty hack adding ECMR_ELB  bit  to the mask
in sh_eth_set_rate() while not removing ECMR_RTM bit (despite it's reserved in
R-Car Ether), and it didn't add a new register offset array despite the closest
SH_ETH_REG_FAST_SH4 mapping differs by 0x200 to the offsets all the R-Car Ether
registers have, and also some of the registers in this old mapping don't exist
on R-Car Ether (due to this, SH7724's 'sh_eth_my_cpu_data' structure is not
adequeate for R-Car too).  Fix all these shortcomings, restoring the SH7724
related section to its pristine state...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver's header file contains initialized register offset tables which (as
any data definitions), of course, have no business being there.  Move them  to
the driver's body, somewhat beautifying the initializers, while at it...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In rtnl_fdb_dump() when the fdb_dump ndo op is not populated
we never set the idx value so that cb->arg[0] is always 0.
Resulting in a endless loop of messages.

Introduced with this commit,

commit 090096bf
Author: Vlad Yasevich <vyasevic@redhat.com>
Date:   Wed Mar 6 15:39:42 2013 +0000

    net: generic fdb support for drivers without ndo_fdb_<op>

CC: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As Ben pointed out following patch fixes bug in checking device
name length limits while forming tunnel device name.

CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

replace per_cpu with per_cpu_ptr to save conversion between address and pointer
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 94191213 replaced the macros
NLMSG_NEXT with calls to nlmsg_next which produces this warning:

kernel/audit.c: In function ‘audit_receive_skb’:
kernel/audit.c:928:3: warning: passing argument 2 of ‘nlmsg_next’ makes pointer from integer without a cast
In file included from include/net/rtnetlink.h:5:0,
                 from include/net/neighbour.h:28,
                 from include/net/dst.h:17,
                 from include/net/sock.h:68,
                 from kernel/audit.c:55:
include/net/netlink.h:359:1: note: expected ‘int *’ but argument is of type ‘int’

Fix this by sending the intended pointer.
Signed-off-by: NAlexandru Copot <alex.mihai.c@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Acked-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use clk_prepare_enable/clk_disable_unprepare to be safe on SMP systems.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The core has a bit for swapping packet data endianism.
Reset default from Cadence is off. Xilinx however, who uses this core on the
Zynq SoCs, opted for on.
Force it to off. This shouldn't change the behaviour for current users of the
macb, but enables usage on Zynq devices.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

At least in the cadence IP core on the Xilinx Zynq SoC the TCOMP/RCOMP flags
are not auto-cleaned. As these flags are evaluated, they need to be cleaned.
Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
This series contains updates to e1000e, ixgbe and ixgbevf.

Majority of the changes are against e1000e (from Bruce Allan).
Bruce adds additional error handling on PHY register access, as
well as improve slow performance on 82579 when connected to a
10Mbit hub.  In addition, fixes LED blink logic for cathode
LED design.  Most notable is added EEE support which is enabled
by default and the added support for LTR on I217/I218.

The ixgbe and ixgbevf from Greg Rose changes the VM so that if a user
does not assign a MAC address, the MAC address is set to all zeros
instead of a random MAC address.  This ensures that we always know when
we have a random address and udev won't get upset about it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Included changes:
- A fix for the network coding component which has been added within the last
  pull request (so it is in linux-3.10). The problem has been spotted thanks to
  Fengguang Wu's automated daily checks on our tree.
- Implementation of the RTNL API for virtual interface creation/deletion and slave
  manipulation
- substitution of seq_printf with seq_puts when possible
- minor cleanups
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NHong Zhiguo <honkiko@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the administrator has not assigned a MAC address to the VF via the
PF then handle it gracefully by generating a temporary MAC address.
This ensures that we always know when we have a random address and
udev won't get upset about it.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Stefan Assmann <sassmann@kpanic.de>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

If the user has not assigned a MAC address to a VM, then don't give it a
random one. Instead, just give it zeros and let it figure out what to do
with them.
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: Stefan Assmann <sassmann@kpanic.de>
Tested-by: NSibai Li <sibai.li@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The previous commit ce43a216 (e1000e:
cleanup USLEEP_RANGE checkpatch checks) converted a number of delays and
sleeps as recommended in ./Documentation/timers/timers-howto.txt.
Unfortunately, a few of the udelay() to usleep_range() conversions are in
code paths that are in an atomic context in which usleep_range() should
not be used.  Revert those specific changes.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Set the Latency Tolerance Reporting (LTR) values for the "PCIe-like"
GbE MAC in the Lynx Point PCH based on Rx buffer size and link speed
when link is up (which must not exceed the maximum latency supported
by the platform), otherwise specify there is no LTR requirement.
Unlike true-PCIe devices which set the LTR maximum snoop/no-snoop
latencies in the LTR Extended Capability Structure in the PCIe Extended
Capability register set, on this device LTR is set by writing the
equivalent snoop/no-snoop latencies in the LTRV register in the MAC and
set the SEND bit to send an Intel On-chip System Fabric sideband (IOSF-SB)
message to the PMC.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that IEEE802.3az-2010 Energy Efficient Ethernet has been approved as
standard (September 2010) and the driver can enable and disable it via
ethtool, enable the feature by default on parts which support it.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>