Commit 8c749327 ("i386: Remove
alternative_smp") did not actually compile on x86 with CONFIG_SMP.

This fixes the __build_read/write_lock helpers.  I've boot tested on
SMP.

[ Andi: "Oops, I think that was a quilt unrefreshed patch.  Sorry.  I
  fixed those before testing, but then still send out the old patch." ]
Signed-off-by: NChris Wright <chrisw@sous-sol.org>
Cc: Gerd Hoffmann <kraxel@suse.de>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Fix return value from memcpy
  [POWERPC] iseries: Define insw et al. so libata/ide will compile
  [POWERPC] Fix irq enable/disable in smp_generic_take_timebase
  [POWERPC] Fix problem with time not advancing on 32-bit platforms
  [POWERPC] Restore copyright notice in arch/powerpc/kernel/fpu.S
  [POWERPC] Fix up ibm_architecture_vec definition
  [POWERPC] Make OF irq map code detect more error cases
  [POWERPC] Support for "weird" MPICs and fixup mpc7448_hpc2
  [POWERPC] Fix MPIC sense codes in documentation
  [POWERPC] Fix performance regression in IRQ radix tree locking
  [POWERPC] Add mpc7448hpc2 device tree source file
  [POWERPC] Add MPC8349E MDS device tree source file to arch/powerpc/boot/dts
  [POWERPC] modify mpc83xx platforms to use new IRQ layer
  [POWERPC] Adapt ipic driver to new host_ops interface, add set_irq_type to set IRQ sense
  [POWERPC] back up old school ipic.[hc] to arch/ppc
  [POWERPC] Use mpc8641hpcn PIC base address from dev tree.
  [POWERPC] Allow MPC8641 HPCN to build with CONFIG_PCI disabled too.
  [POWERPC] Fix powerpc 44x_mmu build
  [POWERPC] Remove flush_dcache_all export

This fixes a hang on ppc32.

The problem was that I was comparing a 32-bit quantity with a 64-bit
quantity, and consequently time wasn't advancing.  This makes us use a
64-bit quantity on all platforms, which ends up simplifying the code
since we can now get rid of the tb_last_stamp variable (which actually
fixes another bug that Ben H and I noticed while going carefully through
the code).

This works fine on my G4 tibook.  Let me know how it goes on your
machines.
Acked-by: NOlaf Hering <olaf@aepfle.de>
Acked-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The backlight changes that went in had a bug where they could cause the
kernel to access an unitialized pointer when blanking if there is no
backlight control on a machine.

The bug affects atyfb, aty128fb, nvidiafb and rivafb.  radeonfb seems to
be ok.  This fixes it.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As pointed out by Herbert Xu <herbert@gondor.apana.org.au>, our
memcpy implementation didn't return the destination pointer as its
return value, and there is code in the kernel that expects that.
This fixes it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Increase default nodes shift to 10, nr_cpus to 1024
  [IA64] remove redundant local_irq_save() calls from sn_sal.h
  [IA64] panic if topology_init kzalloc fails
  [IA64-SGI] Silent data corruption caused by XPC V2.

The radeon requires a VAP state flush when enabling/disabling
vertex programs on the r200 cards.
Signed-off-by: NDave Airlie <airlied@linux.ie>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following change from -mm is important to 2.6.18 (actually to 2.6.17
but its too late for that). This was contributed over three months ago
by VIA to Bartlomiej and nothing happened. As a result the new chipset
is now out and Linux won't run on it. By the time 2.6.18 is finalised
this will be the defacto standard VIA chipset so support would be a good
plan.

Tested in -mm for a while, its essentially a PCI ident update but for
the bridge chip because VIA do things in weird ways.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It's possible to get an invalid page fault in kernel mode when we try to
write out segments from vsyscall32 when dumping core for a 32bit process if
the vsyscall32 DSO is not mapped in its address space (which can happen if,
for example, ulimit -v 100 is run).
Signed-off-by: NSuleiman Souhlal <suleiman@google.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The values in init_tss.ist[] can change when an IST event occurs.  Save
the original IST values for checking stack addresses when debugging or
doing stack traces.
Signed-off-by: NKeith Owens <kaos@ocs.com.au>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After all their only point is having them in user space.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There was a bogus hunk from the genirq merge that essentially
broke stack switching for hard interrupts. Remove it since it isn't
needed.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After all their only point is having them in user space. On x86-64
they don't even work in kernel space.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a replacement for the earlier removal of the e820 MCFG check
we blacklist the Intel SDV with the original BIOS bug that
motivated that check. On those machines don't use MMCONFIG.

This also adds a new pci=mmconf parameter to override the blacklist.

Cc: Greg KH <gregkh@suse.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The .fill causes miscompilations with some binutils version.

Instead just patch the lock prefix in the lock constructs. That is the
majority of the cost and should be good enough.

Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The .fill causes miscompilations with some binutils version.

Instead just patch the lock prefix in the lock constructs. That is the
majority of the cost and should be good enough.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Noticed by Jan Beulich.

When the kernel was moved from 1MB to 2MB in 2.6.17 the kernel reservation
code wasn't adjusted and it still reserved starting with 1MB. This means 1MB always
were lost.

This patch fixes this by reserving only starting with _text.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The unwinder fallback logic still had potential for falling through to
the legacy stack trace code without printing an indication (at once
serving as a separator) of this.

Further, the stack pointer retrieval for the fallback should be as
restrictive as possible (in order to avoid having the legacy stack
tracer try to access invalid memory). The patch tightens that, but
this could certainly be further improved.

Also making the call_trace command line option now conditional upon
CONFIG_STACK_UNWIND (as it's meaningless otherwise).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

By hard-coding the cpuid keys for alternative_smp() rather than using
the symbolic constant it turned out that incorrect values were used on
both i386 (0x68 instead of 0x69) and x86-64 (0x66 instead of 0x68).
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One open question: Should this added push perhaps be made conditional
upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO?
[AK: not needed, these are all very slow paths]
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One open question: Should these added pushes perhaps be made
conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO?
[AK: Not needed -- these are all very slow paths]
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The check for the MCFG table being reserved in the e820 map was originally
added to detect a broken BIOS in a preproduction Intel SDV. However it also
breaks the Apple x86 Macs, which can't supply this properly, but need
a working MCFG. With this patch they wouldn't use the MCFG and not work.

After some discussion I think it's best to remove the heuristic again.
It also failed on some other boxes (although it didn't cause much
problems there because old style port access for PCI config space
still works as fallback), but the preproduction SDVs can just use
pci=nommcfg. Supporting production machines properly is more
important.

Edgar Hucek did all the debugging work.

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Edgar Hucek <hostmaster@ed-soft.at>
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SUNLANCE]: Fix probing problem.
  [SPARC64]: Fix X server hangs due to large pages.

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [STRIP]: Fix neighbour table refcount leak.
  [IPV6]: ipv6_add_addr should install dstentry earlier
  [NETLINK]: Call panic if nl_table allocation fails
  [TCP]: Two RFC3465 Appropriate Byte Count fixes.
  [IPV6]: SNMPv2 "ipv6IfStatsInAddrErrors" counter error
  [E100]: Add module option to ignore bad EEPROM checksums.
  [SCTP]: Fix sctp_primitive_ABORT() call in sctp_close().

These are build fixes that enable (for example) libata and the ide
code to actually build on iSeries.  The associated hardware will never
be supported on legacy iSeries, so the code paths don't actually need
to work, but it is useful (especially for a combined kernel) if the
code can build.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Eran Ben-Avi <eranpublic@yahoo.com> pointed out that the arch/ppc version
of smp_generic_take_timebase disables interrupts on entry but exits without
restoring them.  However, both it and the arch/powerpc version have another
problem, which is that they use local_irq_disable/enable rather than
local_irq_save/restore, and they are called with interrupts disabled.

This fixes both problems; it changes a return to a break in the arch/ppc
version, and changes both versions to use local_irq_save/restore.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This fixes a problem introduced in 5db9fa95.
The last_jiffy per-cpu variable is only 32 bits on 32-bit machines, but it
was being compared with a 64-bit quantity (tb_next_jiffy), which resulted in
time not advancing.

This fixes it by changing last_jiffy to be 64 bits on all platforms.  With
this, we no longer need tb_last_stamp as a 32-bit version of tb_last_jiffy,
so this gets rid of tb_last_stamp and we just use tb_last_jiffy instead.
This also fixes a bug when the boot cpu is not online, because using
tb_last_stamp could have caused the wrong timebase origin value to be used
when calculating the time of day.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This code got moved from head.S but the copyright notice on head.S didn't
get transferred with it.  Noticed by Cort Dougan <cort@fsmlabs.com>.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This problem was noticed by one of the Phyp firmware folks.
Our ibm,client-architecture-support call was failing.
This corrects the vector length parameters being passed in.
Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Device-tree bugs on js20 with some versions of SLOF were causing the
interrupt for IDE to not be parsed correctly and fail to boot. This
patch adds a bit more sanity checking to the parser to detect some of
those errors and fail instead of returning bogus information.  The
powerpc PCI code can then trigger a fallback that works on those
machines.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds a new hardware information table for mpic. This enables
the mpic code to deal with mpic controllers with different register
layouts and hardware behaviours.

This introduces CONFIG_MPIC_WEIRD.  For boards with non standard mpic
controllers, select CONFIG_MPIC_WEIRD and add its hardware information
in the mpic_infos[] array.

TSI108/109 PIC takes the first index of weird hardware information
table.  :)  The table can be extended. The Tsi108/109 PIC looks like
standard OpenPIC but, in fact, is different in register mapping and
behavior.

The patch does not affect the behavior of standard mpic.  If
CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to
the current code.

[benh@kernel.crashing.org:
This patch is a slightly cleaned up version of Zang Roy's support for
the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new
version of the type macros and changes the way MPIC is selected in
Kconfig to better match what is done for other system devices.
]
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The current probe table causes ledma and lebuffer
"le" devices to get probed twice which is not what
we want.

Match just "le" and look directly at the parent to get the correct
top-level node information.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This problem was introduced by changeset
14778d90

Unlike the hugetlb code paths, the normal fault code is not setup to
propagate PTE changes for large page sizes correctly like the ones we
make for I/O mappings in io_remap_pfn_range().

It is absolutely necessary to update all sub-ptes of a largepage
mapping on a fault.  Adding special handling for this would add
considerably complexity to tlb_batch_add().  So let's just side-step
the issue and forcefully dirty any writable PTEs created by
io_remap_pfn_range().

The only other real option would be to disable to large PTE code of
io_remap_pfn_range() and we really don't want to do that.

Much thanks to Mikael Pettersson for tracking down this problem and
testing debug patches.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Found by inspection. The STRIP driver does neigh_lookup() but never
releases.  This driver shouldn't being doing gratuitous arp anyway.

Untested, obviously, because of lack of hardware.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_add_addr allocates a struct inet6_ifaddr and a dstentry, but it
doesn't install the dstentry in ifa->rt until after it releases the
addrconf_hash_lock. This means other CPUs will be able to see the new
address while it hasn't been initialized completely yet.

One possible fix would be to grab the ifp->lock spinlock when
creating the address struct; a simpler fix is to just move the
assignment.

Acked-by: jbeulich@novell.com
Acked-by: okir@suse.de
Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch makes crash happen if initialization of nl_table fails
in initcalls. It is better than getting use after free crash later.
Signed-off-by: NAkinobu Mita <mita@miraclelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) fix slow start after retransmit timeout
2) fix case of L=2*SMSS acked bytes comparison
Signed-off-by: NDaikichi Osuga <osugad@s1.nttdocomo.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

   When I tested Linux kernel 2.6.17.7 about statistics
"ipv6IfStatsInAddrErrors", found that this counter couldn't increase
correctly. The criteria is RFC2465:
 ipv6IfStatsInAddrErrors OBJECT-TYPE
      SYNTAX      Counter32
      MAX-ACCESS  read-only
      STATUS      current
      DESCRIPTION
         "The number of input datagrams discarded because
         the IPv6 address in their IPv6 header's destination
         field was not a valid address to be received at
         this entity.  This count includes invalid
         addresses (e.g., ::0) and unsupported addresses
         (e.g., addresses with unallocated prefixes).  For
         entities which are not IPv6 routers and therefore
         do not forward datagrams, this counter includes
         datagrams discarded because the destination address
         was not a local address."
      ::= { ipv6IfStatsEntry 5 }

When I send packet to host with destination that is ether invalid
address(::0) or unsupported addresses(1::1), the Linux kernel just
discard the packet, and the counter doesn't increase(in the function
ip6_pkt_discard).
Signed-off-by: NLv Liangying <lvly@nanjing-fnst.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several people run into the situation where the E100
EEPROM contents are fine, but the checksum hasn't been
set properly.  This renders the device useless for
them even though it would function correctly.

The default is off, which retains the current behavior.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>