Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

GTIER and DEIER doesn't have same interface on HSW so this "or" operation
makes the information provided useless.

v2: since we have gtier variable already let's split for everybody
and avoid the strange | op.
    Also avoid overriding the value that was set for vlv. In this case I
    believe that we should reorganize the whole function, but I'll respect
    the comment that ask to not touch the order and let this organization
    work to be done later.
v3: moving VLV check to the right place.

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Users often can't do anything about this since their vendors stopped
providing BIOS updates. Also we seem to be able to hack around it
with increased latency values, and thus far the only reports have
been for screens with really high resolutions. So tune it down to a
level where only developers can see it.

Also drop some of the end-user fluff.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Power users spot this and then get adventurous and try to adjust
module driver options. Nothing good ever came out of that, so
hide it better.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Since I've reworked psr support to no longer require x-tiling we don't
check any state protected by the Giant GEM Lock. So drop that check.

Also boo for lockdep_assert_held for not yelling when lockdep is
disabled.

Cc: Paulo Zanoni <przanoni@gmail.com>
Reported-by: NPaulo Zanoni <przanoni@gmail.com>
Acked-by: NPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Fix signal_offset when recording semaphore state on BDW.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Just like during booting the BIOS can leave the VDD bit enabled after
system resume. So apply the same state sanitization there too. This
fixes a problem where after resume the port power domain refcount gets
unbalanced.

v2:
- unchanged
v3:
- call edp sanitizing from the encoder reset handler (Daniel)
Reported-and-tested-by: NJarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Check in vlv_crtc_clock_get if DPLL is enabled before calling dpio read.
It will not be enabled for DSI and avoid dpio read WARN dumps.

Absence of ->get_config was causing other WARN dumps as well. Update
dpll_hw_state as well correctly

v2: Address review comments by Daniel
    - Check if DPLL is enabled rather than checking pipe output type
    - set adjusted_mode->flags to 0 in compute_config rather than using
      pipe_config->quirks
    - Add helper function in intel_dsi_pll.c and use that in intel_dsi.c
    - updated dpll_hw_state correctly
    - Updated commit message and title

v3: Address review comments by Imre
    - Proper masking of P1, M1 fields while computing divisors
    - assert in case of bpp mismatch
    - guard for divide by 0 while computing pclk
    - Use ARRAY_SIZE instead of direct calculation
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This will be needed by an upcoming patch too that needs to sanitize the
VDD state during resume. The additional async disabling is only needed
for the resume path, here it doesn't make a difference since we enable
VDD right after the sanitize call.

v2:
- don't set intel_dp ptr for non-eDP encoders (Ville)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ensure that the DSI packets for a particular sequence are completely
sent before going ahead in the enabling or disabling of the panel
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Gcc warns that addr might be used uninitialized. It may not, but I see
why gcc gets confused.

Additionally, hiding code with side-effects inside WARN_ON() argument
seems uncool, so I moved it outside.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
[danvet: Add obligatory /* shuts up gcc */ comment.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added
deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free()
are currently doing GFP_KERNEL allocation.

But these functions did not get updated to receive gfp_t argument.
This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions,
and removes the deadlock warning.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: NDave Airlie <airlied@redhat.com>

While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL
allocation, ttm_pool_shrink_scan() does not do it. This can result in stack
overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to
memory pressure.

  shrink_slab()
  => ttm_pool_shrink_scan()
     => ttm_page_pool_free()
        => kmalloc(GFP_KERNEL)
           => shrink_slab()
              => ttm_pool_shrink_scan()
                 => ttm_page_pool_free()
                    => kmalloc(GFP_KERNEL)

Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [2.6.35+]
Signed-off-by: NDave Airlie <airlied@redhat.com>

I can observe that RHEL7 environment stalls with 100% CPU usage when a
certain type of memory pressure is given. While the shrinker functions
are called by shrink_slab() before the OOM killer is triggered, the stall
lasts for many minutes.

One of reasons of this stall is that
ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and
are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with
_manager->lock held causes someone (including kswapd) to deadlock when
these functions are called due to memory pressure. This patch changes
"mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to
avoid deadlock.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: NDave Airlie <airlied@redhat.com>

We can use "unsigned int" instead of "atomic_t" by updating start_pool
variable under _manager->lock. This patch will make it possible to avoid
skipping when choosing a pool to shrink in round-robin style, after next
patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork).
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: NDave Airlie <airlied@redhat.com>

list_empty(&_manager->pools) being false before taking _manager->lock
does not guarantee that _manager->npools != 0 after taking _manager->lock
because _manager->npools is updated under _manager->lock.
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@kernel.org> [3.3+]
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDave Airlie <airlied@redhat.com>

HDMI_MUX_EN gpio is requested. If an error occurs, the same name
should be printed (HDMI_MUX_EN) instead of HDMI_MUX_SEL (typo).
Signed-off-by: NBeeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Reviewed-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NRob Clark <robdclark@gmail.com>

lpm-mux is programmed to enable HDMI connector
on the docking station for S805 chipset based
devices.
Signed-off-by: NBeeresh Gopal <gbeeresh@codeaurora.org>
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

MDP5 has several functional blocks (ie: VIG/RGB pipes, LMs, ...).
From one revision to another, these blocks' base addresses might
change due to the number of instances present in the MDP5 hw.
A way of dealing with these offset changes is to introduce
dynamic offsets 'per block'.

This change adds support for the new revision of MDP5: v1.3.
The idea is to define one hw config per MDP version and select
either one of them at runtime, after reading the MDP5 version.

Once the MDP version is known, 'per block' dynamic offsets
are initialized through a global pointer, which is then used for
read/write register access.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Somewhere along the way, the firmware loader sprouted another lock
dependency, resulting in possible deadlock scenario:

 &dev->struct_mutex --> &sb->s_type->i_mutex_key#2 --> &mm->mmap_sem

which is problematic vs things like gem mmap.

So introduce a separate mutex to synchronize gpu init.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Downstream kernel IOMMU had a non-standard way of dealing with multiple
devices and multiple ports/contexts.  We don't need that on upstream
kernel, so rip out the crazy.

Note that we have to move the pinning of the ringbuffer to after the
IOMMU is attached.  No idea how that managed to work properly on the
downstream kernel.

For now, I am leaving the IOMMU port name stuff in place, to simplify
things for folks trying to backport latest drm/msm to device kernels.
Once we no longer have to care about pre-DT kernels, we can drop this
and instead backport upstream IOMMU driver.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Downstream kernel holds this clk via a fake-parent relationship.
Upstream clock framework requires that we hold it explicitly.
Signed-off-by: NRob Clark <robdclark@gmail.com>

On downstream kernel the clk driver directly bangs hdmi phy registers.
For upstream kernel, we need to model this as a clock and register with
the clock framework.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Signed-off-by: NRob Clark <robdclark@gmail.com>

Now that we (almost) have enough dependencies in place (MMCC, RPM, etc),
add necessary DT support so that we can use drm/msm on upstream kernel.

v2: update for review comments
v3: rebase on component helper changes
Signed-off-by: NRob Clark <robdclark@gmail.com>

This change implements msm drm specific fb_mmap function for fb device
to properly map the fb address to userspace.
Signed-off-by: NHai Li <hali@codeaurora.org>
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com> (+ minor comment tweak)

This changes activates the iommu support for MDP5, through the
platform config structure.
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

Mutex is already grabbed in show_locked().. somehow this slipped
through.
Signed-off-by: NRob Clark <robdclark@gmail.com>

Daniel pointed out with hotplug that userspace could be trying to oops us
as root for lols, and that to be correct we shouldn't register the object
with the idr before we have fully set the connector object up.

His proposed solution was a lot more life changing, this seemed like a simpler
proposition to me, get the connector object id from the idr, but don't
register the object until the drm_connector_register callback.

The open question is whether the drm_mode_object_register needs a bigger lock
than just the idr one, but I can't see why it would, but I can be locking
challenged.

v2: fix bool noreg into sane - add comment.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On HSW+, the digital encoders are shared between HDMI and DP outputs,
with one encoder masquerading as both. The VBT should tell us if we need
to have DP or HDMI support on a particular port, but if we don't have DP
support and we enable the DP hpd pulse handler then we cause an oops.

Don't hook up the DP hpd handling if we don't have a DP port.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81856
Reported-by: Intel QA Team.
Signed-off-by: Dave Airlie <airlied@redhat.com> # v1
[ickle: Fix the error handling after a malloc failure]
Reviewed-by: NDave Airlie <airlied@redhat.com>
Cc: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even
if no G2D support is available. Let the ioctl fail when this is the
case, so that userspace can accurately probe for G2D support.

This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't
fail when G2D is absent, leading to a segfault later.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NINki Dae <inki.dae@samsung.com>

Both exynos_g2d_set_cmdlist_ioctl and exynos_g2d_exec_ioctl don't check
if the G2D was succesfully probe. If that is not the case, then g2d_priv
is just NULL and extracting 'dev' from it in the next step  is going to
produce a kernel oops.

Add proper checks and return ENODEV if the G2D is not available.
Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NINki Dae <inki.dae@samsung.com>

The hdmiphy can be apb and hdmiphy_port can be null. So before
accessing hdmiphy_port, it should be checked.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The mixer graphic layer 0 isn't blended as default by commit
0377f4ed(drm/exynos: Don't blend mixer
layer 0). But it needs to be blended with graphic layer 0 if video layer
is enabled by vp because video layer is bottom.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Add MODULE_DEVICE_TABLE calls for the various OF match tables that
currently don't have one. This allows the module to be
autoloaded based on devicetree information.
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: NInki Dae <inki.dae@samsung.com>