The user-visible nfs_mount_data does not contain sufficient data to
describe new mount options, and also is now a legacy structure. Replace
it with the internal nfs_parsed_mount_data for nfsv[23] in-kernel use.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Acked-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

In preparation for rearranging the nfs mount argument passing, make the
nfs_parsed_mount_data struct visible across nfs kernel files.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Acked-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The rpcbind (v3+) netid is provided by each RPC client transport. This fixes
an omission in IPv6 rpcbind client support, and enables future extension.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Move the TCP/UDP rpcbind netid's from the rpcbind client to a global header.
Signed-off-by: NTom Talpey <tmt@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Due to recent edict to remove or replace printk's that can flood the system
log.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Due to recent edict to remove or replace printk's that might flood the
system log.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Due to recent edict to replace or remove printk's that can be triggered en
masse by remote misbehavior.  Left a few that only occur just before a BUG.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

I got the 'mounthost=' option wrong - it shouldn't look for an address
value, but rather a hostname value.  However, the in-kernel mount client
and NFS client cannot resolve a hostname by themselves; they rely on
user-land to pass in the resolved address.

Create a new mount option that does take an address so that the mount
program's address can be passed in.  The mount hostname is now ignored
by the kernel.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

If no mount server port number is specified, the previous change to the
kernel mount client inadvertently allows the NFS server's port number to be
the used as the mount server's port number. If the user specifies an NFS
server port (-o port=x), the mount will fail.

The fix below sets the mount server's port to 0 if no mount server
port is specified by the user.
Signed-off-by: NJames Lentini <jlentini@netapp.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Simplify the in-kernel mount client by using autobind instead of an
explicit call to rpc_getport_sync.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The purpose of an RPC ping (a NULL request) is to determine whether the
remote end is operating and supports the RPC program and version of the
request.

If we do an RPC bind and the remote's rpcbind service says "this
program or service isn't supported" then we have our answer already,
and we should give up immediately.

This is good for the kernel mount client, as it will cause the request
to fail, and then allow an immediate retry with different options.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add more new error code processing to the kernel's rpcbind client
and to call_bind_status() to distinguish two cases:

Case 1: the remote has replied that the program/version tuple is not
registered (returns EACCES)

Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT)

This change allows more specific error processing for each of these two
cases.  We now fail case 2 instead of retrying... it's a server
configuration error not to support even rpcbind version 2.  And don't
expose this new error code to user land -- convert it to EIO before
failing the RPC.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add new error code processing to the kernel's rpcbind client and to
call_bind_status() to distinguish two cases:

Case 1: the remote has replied that the program/version tuple is not
registered (returns -EACCES)

Case 2: another process is already in the middle of binding on this
transport (now returns -EAGAIN)

This change allows more specific retry processing for each of these two
cases.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

When a server returns a bad rpcbind reply, make rpcbind client recovery logic
retry with an older protocol version.  Older versions are more likely to work
correctly.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add better sanity checking of server replies to the GETVERSADDR reply
decoder.  Change the error return code: EIO is what other XDR decoding
routines return if there is a failure while decoding.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’:
/home/cel/linux/net/sunrpc/clnt.c:1538: warning:
	signed and unsigned type in conditional expression

This points out another case where a conditional expression returns a
signed value in one arm and an unsigned value in the other.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Check the length of the passed-in server name before trying to print it in
the log.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Noticed by Tom Talpey <tmt@netapp.com>:

OBTW, there's a nit on that memcpy, too. The r_addr is an array, so

memcpy(&map->r_addr

is passing the address of the array as a char **. It's the same as
map->r_addr, but technically the wrong type.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’:
/home/cel/linux/net/sunrpc/clnt.c:445: warning:
	comparison between signed and unsigned

RPC version numbers are u32, not int.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Remove one of two identical dprintk's that occur when an RPC client is
created.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Fix some problems with rpcbind v3 and v4 queries from the in-kernel rpcbind
client:

1.  The r_addr argument must be a full universal address, not just an IP
address, and

2.  The universal address in r_addr is the address of the remote rpcbind
server, not the RPC service being requested

This addresses bugzilla.kernel.org report 8891 for 2.6.23-rc and greater.

In addition, if the rpcbind client is unable to start the rpcbind request,
make sure not to leak the xprt.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>

"Universal addresses" are a string representation of an IP address and
port.  They are described fully in RFC 3530, section 2.2.  Add support
for generating them in the RPC client's socket transport module.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Finalize support for setting up RPC client transports to remote RPC
services addressed via IPv6.

Based on work done by Gilles Quillard at Bull Open Source.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clone separate connect worker functions for connecting AF_INET6 sockets.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for introduction of IPv6 versions of same.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Finishing a socket connect is the same for IPv4 and IPv6, so split it out
into a helper.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clone xs_bindresvport into two functions, one that can handle IPv4
addresses, and one that can handle IPv6 addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for introduction of IPv6-specific socket bind function.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

We could clone xs_set_port, but this is easier overall.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare for adding IPv6 support to the RPC client by adding IPv6
capabilities to rpcbind.  Note that this is support on the query side
only; registering IPv6 addresses with the local portmapper will come
later.

Note we have to take care not to fall back to using version 2 of the
rpcbind protocol if we're dealing with IPv6 address.  Version 2 doesn't
support IPv6 at all.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Clone xs_format_ipv4_peer_addresses into an IPv6 version.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it
to xs_format_ipv4_peer_addresses.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Add support for the NFS client's need to export volume information
with IP addresses formatted in hex instead of decimal.

This isn't used yet, but subsequent patches (not in this series) will
change the NFS client to use this functionality.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Use more generic logic to free buffers holding formatted addresses.  This
makes it less likely a bug will be introduced when adding additional buffer
types in xs_format_peer_address().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

include/linux/kernel.h gives us some nice macros for formatting IP
addresses.  Use them.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

A minor thing, but useful when working with a server with multiple
addrs. This looks like it might also be necessary if Miklos' effort
to eliminate /etc/mtab ever comes to fruition.

When displaying mount options in /proc/mounts, the kernel prints
"addr=hostname". This info is redundant since we already have the
hostname displayed as part of the "device" section of the mount. This
patch changes it to display the IP address to which the socket is
connected.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>