Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 19 5月, 2015 11 次提交
  3. 05 5月, 2015 1 次提交
  5. 11 6月, 2014 1 次提交
    • T
      RDMA/core: Add support for iWARP Port Mapper user space service · 30dc5e63
      由 Tatyana Nikolova 提交于 
      This patch adds iWARP Port Mapper (IWPM) Version 2 support.  The iWARP
Port Mapper implementation is based on the port mapper specification
section in the Sockets Direct Protocol paper -
http://www.rdmaconsortium.org/home/draft-pinkerton-iwarp-sdp-v1.0.pdf

Existing iWARP RDMA providers use the same IP address as the native
TCP/IP stack when creating RDMA connections.  They need a mechanism to
claim the TCP ports used for RDMA connections to prevent TCP port
collisions when other host applications use TCP ports.  The iWARP Port
Mapper provides a standard mechanism to accomplish this.  Without this
service it is possible for RDMA application to bind/listen on the same
port which is already being used by native TCP host application.  If
that happens the incoming TCP connection data can be passed to the
RDMA stack with error.

The iWARP Port Mapper solution doesn't contain any changes to the
existing network stack in the kernel space.  All the changes are
contained with the infiniband tree and also in user space.

The iWARP Port Mapper service is implemented as a user space daemon
process.  Source for the IWPM service is located at
http://git.openfabrics.org/git?p=~tnikolova/libiwpm-1.0.0/.git;a=summary

The iWARP driver (port mapper client) sends to the IWPM service the
local IP address and TCP port it has received from the RDMA
application, when starting a connection.  The IWPM service performs a
socket bind from user space to get an available TCP port, called a
mapped port, and communicates it back to the client.  In that sense,
the IWPM service is used to map the TCP port, which the RDMA
application uses to any port available from the host TCP port
space. The mapped ports are used in iWARP RDMA connections to avoid
collisions with native TCP stack which is aware that these ports are
taken. When an RDMA connection using a mapped port is terminated, the
client notifies the IWPM service, which then releases the TCP port.

The message exchange between the IWPM service and the iWARP drivers
(between user space and kernel space) is implemented using netlink
sockets.

1) Netlink interface functions are added: ibnl_unicast() and
   ibnl_mulitcast() for sending netlink messages to user space

2) The signature of the existing ibnl_put_msg() is changed to be more
   generic

3) Two netlink clients are added: RDMA_NL_NES, RDMA_NL_C4IW
   corresponding to the two iWarp drivers - nes and cxgb4 which use
   the IWPM service

4) Enums are added to enumerate the attributes in the netlink
   messages, which are exchanged between the user space IWPM service
   and the iWARP drivers
Signed-off-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Reviewed-by: NPJ Waskiewicz <pj.waskiewicz@solidfire.com>

[ Fold in range checking fixes and nlh_next removal as suggested by Dan
  Carpenter and Steve Wise.  Fix sparse endianness in hash.  - Roland ]
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      30dc5e63
  7. 02 4月, 2014 1 次提交
  9. 23 1月, 2014 1 次提交
  11. 19 1月, 2014 1 次提交
  13. 15 1月, 2014 2 次提交
    • A
      net: replace macros net_random and net_srandom with direct calls to prandom · 63862b5b
      由 Aruna-Hewapathirane 提交于 
      This patch removes the net_random and net_srandom macros and replaces
them with direct calls to the prandom ones. As new commits only seem to
use prandom_u32 there is no use to keep them around.
This change makes it easier to grep for users of prandom_u32.
Signed-off-by: NAruna-Hewapathirane <aruna.hewapathirane@gmail.com>
Suggested-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      63862b5b
    • M
      IB/core: Ethernet L2 attributes in verbs/cm structures · dd5f03be
      由 Matan Barak 提交于 
      This patch add the support for Ethernet L2 attributes in the
verbs/cm/cma structures.

When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority
in a similar manner that the IB L2 (and the L4 PKEY) attributes are used.

Thus, those attributes were added to the following structures:

* ib_ah_attr - added dmac
* ib_qp_attr - added smac and vlan_id, (sl remains vlan priority)
* ib_wc - added smac, vlan_id
* ib_sa_path_rec - added smac, dmac, vlan_id
* cm_av - added smac and vlan_id

For the path record structure, extra care was taken to avoid the new
fields when packing it into wire format, so we don't break the IB CM
and SA wire protocol.

On the active side, the CM fills. its internal structures from the
path provided by the ULP.  We add there taking the ETH L2 attributes
and placing them into the CM Address Handle (struct cm_av).

On the passive side, the CM fills its internal structures from the WC
associated with the REQ message.  We add there taking the ETH L2
attributes from the WC.

When the HW driver provides the required ETH L2 attributes in the WC,
they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core
code checks for the presence of these flags, and in their absence does
address resolution from the ib_init_ah_from_wc() helper function.

ib_modify_qp_is_ok is also updated to consider the link layer. Some
parameters are mandatory for Ethernet link layer, while they are
irrelevant for IB.  Vendor drivers are modified to support the new
function signature.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      dd5f03be
  15. 12 11月, 2013 1 次提交
  17. 09 11月, 2013 2 次提交
    • D
      IB/cma: Check for GID on listening device first · be9130cc
      由 Doug Ledford 提交于 
      As a simple optimization that should speed up the vast majority of
connect attemps on IB devices, when we are searching for the GID of an
incoming connection in the cached GID lists of devices, search the
device that received the incoming connection request first.  If we
don't find it there, then move on to other devices.

This reduces the time to perform 10,000 connections considerably.
Prior to this patch, a bad run of cmtime would look like this:

connect      :    12399.26   12351.10    8609.00    1239.93

With this patch, it looks more like this:

connect      :     5864.86    5799.80    8876.00     586.49
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      be9130cc
    • D
      IB/cma: Use cached gids · 29f27e84
      由 Doug Ledford 提交于 
      The cma_acquire_dev function was changed by commit 3c86aa70
("RDMA/cm: Add RDMA CM support for IBoE devices") to use find_gid_port()
because multiport devices might have either IB or IBoE formatted gids.
The old function assumed that all ports on the same device used the
same GID format.

However, when it was changed to use find_gid_port(), we inadvertently
lost usage of the GID cache.  This turned out to be a very costly
change.  In our testing, each iteration through each index of the GID
table takes roughly 35us.  When you have multiple devices in a system,
and the GID you are looking for is on one of the later devices, the
code loops through all of the GID indexes on all of the early devices
before it finally succeeds on the target device.  This pathological
search behavior combined with 35us per GID table index retrieval
results in results such as the following from the cmtime application
that's part of the latest librdmacm git repo:

ib1:
step              total ms     max ms     min us  us / conn
create id    :       29.42       0.04       1.00       2.94
bind addr    :   186705.66      19.00   18556.00   18670.57
resolve addr :       41.93       9.68     619.00       4.19
resolve route:      486.93       0.48     101.00      48.69
create qp    :     4021.95       6.18     330.00     402.20
connect      :    68350.39   68588.17   24632.00    6835.04
disconnect   :     1460.43     252.65-1862269.00     146.04
destroy      :       41.16       0.04       2.00       4.12

ib0:
step              total ms     max ms     min us  us / conn
create id    :       28.61       0.68       1.00       2.86
bind addr    :     2178.86       2.95     201.00     217.89
resolve addr :       51.26      16.85     845.00       5.13
resolve route:      620.08       0.43      92.00      62.01
create qp    :     3344.40       6.36     273.00     334.44
connect      :     6435.99    6368.53    7844.00     643.60
disconnect   :     5095.38     321.90     757.00     509.54
destroy      :       37.13       0.02       2.00       3.71

Clearly, both the bind address and connect operations suffer
a huge penalty for being anything other than the default
GID on the first port in the system.

After applying this patch, the numbers now look like this:

ib1:
step              total ms     max ms     min us  us / conn
create id    :       30.15       0.03       1.00       3.01
bind addr    :       80.27       0.04       7.00       8.03
resolve addr :       43.02      13.53     589.00       4.30
resolve route:      482.90       0.45     100.00      48.29
create qp    :     3986.55       5.80     330.00     398.66
connect      :     7141.53    7051.29    5005.00     714.15
disconnect   :     5038.85     193.63     918.00     503.88
destroy      :       37.02       0.04       2.00       3.70

ib0:
step              total ms     max ms     min us  us / conn
create id    :       34.27       0.05       1.00       3.43
bind addr    :       26.45       0.04       1.00       2.64
resolve addr :       38.25      10.54     760.00       3.82
resolve route:      604.79       0.43      97.00      60.48
create qp    :     3314.95       6.34     273.00     331.49
connect      :    12399.26   12351.10    8609.00    1239.93
disconnect   :     5096.76     270.72    1015.00     509.68
destroy      :       37.10       0.03       2.00       3.71

It's worth noting that we still suffer a bit of a penalty on
connect to the wrong device, but the penalty is much less than
it used to be.  Follow on patches deal with this penalty.

Many thanks to Neil Horman for helping to track the source of
slow function that allowed us to track down the fact that
the original patch I mentioned above backed out cache usage
and identify just how much that impacted the system.
Signed-off-by: NDoug Ledford <dledford@redhat.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>
      29f27e84
  19. 08 11月, 2013 1 次提交
  21. 01 10月, 2013 1 次提交
  23. 13 8月, 2013 1 次提交
  25. 31 7月, 2013 3 次提交
  27. 15 7月, 2013 1 次提交
  29. 21 6月, 2013 12 次提交