This fixup is not actually used, so in practice this is just a
cosmetic fix.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

With the auto-parser we can choose the dac nid for vmaster from
the DACs we already know, instead of hard-coding it. This is more
future-proof and was actually wrong on one machine.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When there are the same or more number of HP pins are available, HP pins
are used as the primary outputs instead of the speaker pins.  But, in
some cases (especially with ALC663 & co), some DACs are available only
with a later pin and it's assigned to a speaker, and since the driver
parses the pins from the lower NID, such a DAC was skipped eventually
without assignments.  This resulted in a regression, the missing speaker
volume control in the new parser.

As a workaround for this, now the driver retries the pin->DAC mapping
again after restoring the speaker-pins as primary.  This is still an ad
hoc fix, but it works so far for most of Realtek codecs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

On systems with two speaker pins, the secondary speaker pin is mostly
assigned to a bass speaker instead of a surround.  Thus it makes more
sense to rename the control properly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The multiple headphone or speaker pins are usually provided to
output the same stream unlike line-out jacks (which are supposed
to be multi-channel surrounds).  Thus giving a mixer name like
"Headphone Surround" is rather confusing.  Instead, when multiple
headphone volumes are available, use index with the same "Headphone"
name.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When no imux is available (e.g. a single capture source),
alc_auto_init_input_src() may trigger an Oops due to the access to -1.
Add a proper zero-check to avoid it.

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of managing input-jack stuff separately, call all stuff inside
the kctl-jack creation, deletion and report.  The caller no longer needs
to care about input-jack.

The better integration between input-jack and kctl-jack should be done
in the upper layer in near future, but for now, it's implemented locally
for more tests.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use an inline function for the common pattern for assigning a capsrc.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the imux entries are rebuilt in alc_rebuild_imux_for_auto_mic(),
the initialization of index field is missing.  It may work without it
casually when the original imux was created by the auto-parser, but
it's definitely broken in the case of static configs where no imux was
parsed beforehand.  Because of this, the auto-mic switching doesn't
work properly on some model options.

This patch adds the missing initialization of index field.
Reported-by: NDmitry Nezhevenko <dion@inhex.net>
Cc: <stable@kernel.org> [v3.1]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We can use the very same table in hda_jack.c for managing the list for
input-jack elements, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Manage the tags assigned for unsolicited events dynamically together
with the jack-detection routines.  Basically this is almost same as what
we've done in patch_sigmatel.c.  Assign the new tag number for each new
unsol event, associate with the given NID and the action type, etc.

With this change, now all pins looked over in snd_hda_jack_add_kctls()
are actually enabled for detection now even if the pins aren't used for
jack-retasking by the driver.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create kcontrols for pin jack-detections, which work similarly like
jack-input layer.  Each control will notify when the jack is plugged or
unplugged, and also user can read the value at any time via the normal
control API.

The control elements are created with iface=CARD, so that they won't
appear in the mixer apps.

So far, only the pins that enabled the jack-detection are registered.
For covering all pins, the transition of the common unsol-tag handling
would be needed.  Stay tuned.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Introduce a table containing the pins and their jack-detection states
for avoiding the unnecessary verbs to check the pin status at each time.

When the unsol event is enabled via snd_hda_jack_detect_enable(), it
automatically adds the given NID to the table.  Then the driver supposes
that the codec driver will set the dirty flag appropariately when an
unsolicited event is invoked for that pin.

The behavior for reading other pins that aren't registered in the table
doesn't change.  Only the pins assigned to the table are cached, so far.

In near futre, this table can be extended to use the central place for
the unsolicited events of all pins, etc, and eventually include the
jack-detect kcontrols that replace the current input-jack stuff.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Translate ALC880 medion-rim static configs to the auto-parser with the
additional GPIO2 verb and COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 macpro and imac24 static configs can be transferred to the
auto-parser with the additional GPIO setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit [c3e837bb: ALSA: hda/realtek - Rewrite ALC882 acer-aspire-*
models with the auto-parser], the check of the model option got removed
mistakenly.  Re-added the board_config check again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the pin or the DAC doesn't support the stereo, create a mono
control instead of creating a stereo control blindly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Having just one semicolon after a break statement is enough.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can move the big acer-aspire-* static quirks to the auto-paresr
with some additional pin-configs and verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far the driver creates the multi-io jacks only when a single output
jack, i.e. no multiple speakers are assigned.  This patch adds the
similar multi-io detection even with multiple speakers are assigned
primarily, so that 5.1-speakers + HP/mic/LI combination can work.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we're touching the desktop static configs for ALC88x codecs.
These are mostly OK with the auto-parser, but some models need careful
handling; ALC889 intel mobo requires the COEF setup, and W2JC needs
GPIO1 and COEF.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All ALC882 targa-* models can be replaced with the auto-parser just
with the additional GPIO3 setup.  And it's generically applied to all
MSI boards unless other quirks are present.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No, I'm not Mr. Monk, but can't resist...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 model=acer-aspire requires the additional COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move these quitks to the auto-parser.  They just need some EAPD setups
in addition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These models work fine with the auto-parser with the additional COEF
setup.  The iMac 7,1 (106b:3200) also uses the same quirk, so remove it
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not only PCI SSIDs but also look through codec SSIDs for fix-up table
entries.  MacBook tend to give the same PCI SSID but unique codec SSIDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ASUS EEE1601 works almost fine with the auto-parser but the static
configuration has a certain specific COEF verb.  Add this to the fix-up
list so that we can drop the whole EEE1601 static config from
alc882_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Providing a pincfg fix for VAIO-TT with ALC889 codec to work with the
auto-parser, and drop the static configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now that model=ultra is supported well by the auto-parser, we can get rid
of the whole alc262_quirks.c and its related codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A machine like Q1-ultra which has only a single HP but no mic-jack, we
can re-task the headhpone as an external mic jack.  This was done formerly
in ALC262 model=ultra quirk, and now the auto-parser supports this mode.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now most of ALC262 stuff has been moved to the auto-parser, and no longer
need for keeping model=basic.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works well with the auto-parse and the default BIOS setup when an
additional COEF setup (for benq) is used.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The conversion from ALC262 model=benq and model=benq-t31 static configs
to auto-parser requires the manual COEF setups for corresponding models.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The static quirks for ALC262 Lenovo 3000 can be covered by the auto-
parser with a fixup of the mic-pin to VREF50 and the additional COEF
verb.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the auto-parser for ALC262 model=toshiba-rx1 with the fixed pin-
configs.  The BIOS table seems incorrect, so many pin entries are
overwritten to match with the former quirk.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use the auto-parser for ALC262 model=tyan with a pin-config fix-up and
drop the static configuration.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a Realtek codec has a matrix-style capture-source selection, we
need to scan all connections instead of only imux items.  Otherwise some
input might be kept unmuted.  Although the corresponding input must be
dead so there should be no input from it, it's still safer to mute the
route completely.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The 3.1 kernel has a regression for ALC861 codec where no sound output
is heard with the default setup.  It's because the amps in DACs aren't
properly unmuted while the output mixers are assigned only to pins.

This patch fixes the missing initialization of DACs when no mixer is
assigned to them.
Tested-by: NAndrea Iob <andrea_iob@yahoo.it>
Cc: <stable@kernel.org> [v3.1+]
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some BIOS report invalid pins as digital output pins.  The driver checks
the connection but it doesn't do it fully correctly, and it leaves some
undefined value as the audio-out widget, which makes the driver spewing
warnings.  This patch fixes the issue.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=727348

Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>