With some small changes to kconfig makefile we can now
locate the defconfig files for i386 and x86_64 in
the configs/ subdirectory under x86.
make ARCH=i386 defconfig and make defconfig
works as expected also after this change.
But arch maintainers shall now update a defconfig file in
the configs/ directory.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently, CONFIG_X86_CMPXCHG64 both enables boot-time checking of
the cmpxchg64b feature and enables compilation of the set_64bit() family.
Since the option is dependent on PAE, and since KVM depends on set_64bit(),
this effectively disables KVM on i386 nopae.

Simplify by removing the config option altogether: the boot check is made
dependent on CONFIG_X86_PAE directly, and the set_64bit() family is exposed
without constraints.  It is up to users to check for the feature flag (KVM
does not as virtualiation extensions imply its existence).
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndi Kleen <ak@suse.de>

Both old-IDE and libata should be able handle all controllers and
devices found using normal resource reservation methods.

This eliminates the awful, low-performing split-driver configuration
where old-IDE drove the PATA portion of a PCI device, in PIO-only mode,
and libata drove the SATA portion of the /same/ PCI device, in DMA mode.
Typically vendors would ship SATA hard drive / PATA optical
configuration, which would lend itself to slow (PIO-only) CD-ROM
performance.

For Intel users running in combined mode, it is now wholly dependent on
your driver choice (potentially link order, if you compile both drivers
in) whether old-IDE or libata will drive your hardware.

In either case, you will get full performance from both SATA and PATA
ports now, without having to pass a kernel command line parameter.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

I'm trying to remove drivers/acpi/motherboard.c, which is mostly
redundant with drivers/pnp/system.c.  So make sure that we include the
PNP driver in the default config.  Most distros enable this already.

Turning on CONFIG_PNP also causes the following options to be enabled:

    CONFIG_PNPACPI
    CONFIG_SERIAL_8250_PNP

CONFIG_SERIAL_8250_PNP causes legacy serial ports to be discovered
twice, which is ugly but harmless:

    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAndi Kleen <ak@suse.de>

The apple fn keys don't work anymore with 2.6.20-rc1.

The reason is that USB_HID_POWERBOOK appears in several files although
USB_HIDINPUT_POWERBOOK is the thing to be used.

The patch fixes this.

Cc: Greg KH <greg@kroah.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It has caused more problems than it ever really solved, and is
apparently not getting cleaned up and fixed.  We can put it back when
it's stable and isn't likely to make warning or bug events worse.

In the meantime, enable frame pointers for more readable stack traces.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAndi Kleen <ak@suse.de>

This is based on the x86-64 defconfig which works on a wide range of systems.
Signed-off-by: NAndi Kleen <ak@suse.de>

Matthew Wilcox notified me that CONFIG_PM_STD_PARTITION="/dev/hda2" in the
i386 defconfig wasn't a good idea (especially since it prevented booting
for him due to another bug).

This patch sets CONFIG_PM_STD_PARTITION="" in the i386 defconfig.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Cc: Matthew Wilcox <willy@debian.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The i386 defconfig wasn't updated for ages.

Instead of running "make oldconfig" on the old defconfig and trying to
give reasonable answers at all new options, this patch replaces it with
the one I'm using in 2.6.16-rc1.

This way, it's a .config that is confirmed to work on at least one
computer in the world.  ;-)
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Adds the ability to disability packet split at compile time and use the legacy receive path on PCI express hardware.  Made this a CONFIG option and modified the Kconfig, to reflect the new option.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Delete the ability to build an ACPI kernel that does
not include PCI support.  When such a machine is created
and it requires a tuned kernel, send a patch.

http://bugzilla.kernel.org/show_bug.cgi?id=1364Signed-off-by: NLen Brown <len.brown@intel.com>

it is a synonym for CONFIG_ACPI
Signed-off-by: NLen Brown <len.brown@intel.com>

it is a synonym for CONFIG_ACPI
Signed-off-by: NLen Brown <len.brown@intel.com>

it has been a synonym for CONFIG_ACPI since 2.6.12
Signed-off-by: NLen Brown <len.brown@intel.com>

CONFIG_PM_DISK is long gone, but it still managed to survived at few
places.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!