Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 9月, 2009 2 次提交
  3. 17 8月, 2009 2 次提交
    • I
      x86, mce: Don't initialize MCEs on unknown CPUs · e412cd25
      由 Ingo Molnar 提交于 
      An older test-box started hanging at the following point during
bootup:

 [    0.022996] Mount-cache hash table entries: 512
 [    0.024996] Initializing cgroup subsys debug
 [    0.025996] Initializing cgroup subsys cpuacct
 [    0.026995] Initializing cgroup subsys devices
 [    0.027995] Initializing cgroup subsys freezer
 [    0.028995] mce: CPU supports 5 MCE banks

I've bisected it down to commit 4efc0670 ("x86, mce: use 64bit
machine check code on 32bit"), which utilizes the MCE code on
32-bit systems too.

The problem is caused by this detail in my config:

  # CONFIG_CPU_SUP_INTEL is not set

This disables the quirks in mce_cpu_quirks() but still enables
MCE support - which then hangs due to the missing quirk
workaround needed on this CPU:

	if (c->x86 == 6 && c->x86_model < 0x1A && banks > 0)
		mce_banks[0].init = 0;

The safe solution is to not initialize MCEs if we dont know on
what CPU we are running (or if that CPU's support code got
disabled in the config).

Also be a bit more defensive on 32-bit systems: dont do a
boot-time dump of pending MCEs not just on the specific system
that we found a problem with (Pentium-M), but earlier ones as
well.

Now this problem is probably not common and disabling CPU
support is rare - but still being more defensive in something
we turned on for a wide range of CPUs is prudent.

Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: Message-ID: <4A88E3E4.40506@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e412cd25
    • B
      x86, mce: don't log boot MCEs on Pentium M (model == 13) CPUs · c7f6fa44
      由 Bartlomiej Zolnierkiewicz 提交于 
      On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: NAndi Kleen <andi@firstfloor.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c7f6fa44
  5. 16 8月, 2009 1 次提交
  7. 11 8月, 2009 1 次提交
    • D
      x86, mce: therm_throt - change when we print messages · 0d01f314
      由 Dmitry Torokhov 提交于 
      My Latitude d630 seems to be handling thermal events in SMI by
lowering the max frequency of the CPU till it cools down but
still leaks the "everything is normal" events.

This spams the console and with high priority printks.

Adjust therm_throt driver to only print messages about the fact
that temperatire returned back to normal when leaving the
throttling state.

Also lower the severity of "back to normal" message from
KERN_CRIT to KERN_INFO.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
LKML-Reference: <20090810051513.0558F526EC9@mailhub.coreip.homeip.net>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      0d01f314
  9. 22 7月, 2009 1 次提交
  11. 09 7月, 2009 1 次提交
  13. 26 6月, 2009 1 次提交
  15. 18 6月, 2009 3 次提交
  17. 17 6月, 2009 19 次提交
  19. 11 6月, 2009 2 次提交
    • H
      x86, mce: Add boot options for corrected errors · 62fdac59
      由 Hidetoshi Seto 提交于 
      This patch introduces three boot options (no_cmci, dont_log_ce
and ignore_ce) to control handling for corrected errors.

The "mce=no_cmci" boot option disables the CMCI feature.

Since CMCI is a new feature so having boot controls to disable
it will be a help if the hardware is misbehaving.

The "mce=dont_log_ce" boot option disables logging for corrected
errors. All reported corrected errors will be cleared silently.
This option will be useful if you never care about corrected
errors.

The "mce=ignore_ce" boot option disables features for corrected
errors, i.e. polling timer and cmci.  All corrected events are
not cleared and kept in bank MSRs.

Usually this disablement is not recommended, however it will be
a help if there are some conflict with the BIOS or hardware
monitoring applications etc., that clears corrected events in
banks instead of OS.

[ And trivial cleanup (space -> tab) for doc is included. ]
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
LKML-Reference: <4A30ACDF.5030408@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      62fdac59
    • H
      x86, mce: Fix mce printing · 77e26cca
      由 Hidetoshi Seto 提交于 
      This patch:

 - Adds print_mce_head() instead of first flag
 - Makes the header to be printed always
 - Stops double printing of corrected errors

[ This portion originates from Huang Ying's patch ]

Originally-From: Huang Ying <ying.huang@intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: <4A30AC83.5010708@jp.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      77e26cca
  21. 10 6月, 2009 1 次提交
    • A
      KVM: Add VT-x machine check support · a0861c02
      由 Andi Kleen 提交于 
      VT-x needs an explicit MC vector intercept to handle machine checks in the
hyper visor.

It also has a special option to catch machine checks that happen
during VT entry.

Do these interceptions and forward them to the Linux machine check
handler. Make it always look like user space is interrupted because
the machine check handler treats kernel/user space differently.

Thanks to Jiang Yunhong for help and testing.

Cc: stable@kernel.org
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>
      a0861c02
  23. 09 6月, 2009 1 次提交
  25. 04 6月, 2009 5 次提交
    • A
      x86, mce: support action-optional machine checks · 9b1beaf2
      由 Andi Kleen 提交于 
      Newer Intel CPUs support a new class of machine checks called recoverable
action optional.

Action Optional means that the CPU detected some form of corruption in
the background and tells the OS about using a machine check
exception. The OS can then take appropiate action, like killing the
process with the corrupted data or logging the event properly to disk.

This is done by the new generic high level memory failure handler added
in a earlier patch. The high level handler takes the address with the
failed memory and does the appropiate action, like killing the process.

In this version of the patch the high level handler is stubbed out
with a weak function to not create a direct dependency on the hwpoison
branch.

The high level handler cannot be directly called from the machine check
exception though, because it has to run in a defined process context to
be able to sleep when taking VM locks (it is not expected to sleep for a
long time, just do so in some exceptional cases like lock contention)

Thus the MCE handler has to queue a work item for process context,
trigger process context and then call the high level handler from there.

This patch adds two path to process context: through a per thread kernel
exit notify_user() callback or through a high priority work item.
The first runs when the process exits back to user space, the other when
it goes to sleep and there is no higher priority process.

The machine check handler will schedule both, and whoever runs first
will grab the event. This is done because quick reaction to this
event is critical to avoid a potential more fatal machine check
when the corruption is consumed.

There is a simple lock less ring buffer to queue the corrupted
addresses between the exception handler and the process context handler.
Then in process context it just calls the high level VM code with
the corrupted PFNs.

The code adds the required code to extract the failed address from
the CPU's machine check registers. It doesn't try to handle all
possible cases -- the specification has 6 different ways to specify
memory address -- but only the linear address.

Most of the required checking has been already done earlier in the
mce_severity rule checking engine.  Following the Intel
recommendations Action Optional errors are only enabled for known
situations (encoded in MCACODs). The errors are ignored otherwise,
because they are action optional.

v2: Improve comment, disable preemption while processing ring buffer
    (reported by Ying Huang)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      9b1beaf2
    • A
      x86, mce: rename mce_notify_user to mce_notify_irq · 9ff36ee9
      由 Andi Kleen 提交于 
      Rename the mce_notify_user function to mce_notify_irq. The next
patch will split the wakeup handling of interrupt context
and of process context and it's better to give it a clearer
name for this.

Contains a fix from Ying Huang

[ Impact: cleanup ]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      9ff36ee9
    • H
      x86, mce: export MCE severities coverage via debugfs · 4611a6fa
      由 Huang Ying 提交于 
      The MCE severity judgement code is data-driven, so code coverage tools
such as gcov can not be used for measuring coverage. Instead a dedicated
coverage mechanism is implemented.  The kernel keeps track of rules
executed and reports them in debugfs.

This is useful for increasing coverage of the mce-test testsuite.

Right now it's unconditionally enabled because it's very little code.
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      4611a6fa
    • A
      x86, mce: implement new status bits · ed7290d0
      由 Andi Kleen 提交于 
      The x86 architecture recently added some new machine check status bits:
S(ignalled) and AR (Action-Required). Signalled allows to check
if a specific event caused an exception or was just logged through CMCI.
AR allows the kernel to decide if an event needs immediate action
or can be delayed or ignored.

Implement support for these new status bits. mce_severity() uses
the new bits to grade the machine check correctly and decide what
to do. The exception handler uses AR to decide to kill or not.
The S bit is used to separate events between the poll/CMCI handler
and the exception handler.

Classical UC always leads to panic. That was true before anyways
because the existing CPUs always passed a PCC with it.

Also corrects the rules whether to kill in user or kernel context
and how to handle missing RIPV.

The machine check handler largely uses the mce-severity grading
engine now instead of making its own decisions. This means the logic
is centralized in one place.  This is useful because it has to be
evaluated multiple times.

v2: Some rule fixes; Add AO events
Fix RIPV, RIPV|EIPV order (Ying Huang)
Fix UCNA with AR=1 message (Ying Huang)
Add comment about panicing in m_c_p.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      ed7290d0
    • A
      x86, mce: print header/footer only once for multiple MCEs · 86503560
      由 Andi Kleen 提交于 
      When multiple MCEs are printed print the "HARDWARE ERROR" header
and "This is not a software error" footer only once. This
makes the output much more compact with many CPUs.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      86503560