Commit e1108a63 ("usb_serial: Use the
shutdown() operation") breaks the ability to use a usb console
starting in 2.6.33.  This was observed when using
console=ttyUSB0,115200 as a boot argument with an FTDI device.  The
error is:

ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22

The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in
tty_port_shutdown() it always clears the flag if it is set.  The fix
is to add a variable to the tty_port struct to indicate when the tty
port is a console.

CC: Alan Cox <alan@linux.intel.com>
CC: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oliver@neukum.org>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJason Wessel <jason.wessel@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

CC      drivers/char/tty_buffer.o
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’:
drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast
drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’:
drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast

Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and
					  tty_insert_flip_string_fixed_flag().
Signed-off-by: NFang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Alan pointed out a race in the code where hvc_remove is invoked. The
recent virtio_console work is the first user of hvc_remove().

Alan describes it thus:

The hvc_console assumes that a close and remove call can't occur at the
same time.

In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous
itself....

So this can happen

        hvc_close                               hvc_remove
        hung up ? - no
                                                lock
                                                tty = hp->tty
                                                unlock
        lock
        hp->tty = NULL
        unlock
        notify del
        kref_put the hvc struct
        close completes
        tty is destroyed
                                                tty_hangup dead tty
                                                tty->ops will be NULL
                                                NULL->...

This patch adds some tty krefs and also converts to using tty_vhangup().
Reported-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linuxppc-dev@ozlabs.org
CC: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require a VT_RELDISP ioctl call"

This reverts commit eec9fe7d.

Ari writes as the reason this should be reverted:
	The problems with this patch include:
	1. There's at least one subtlety I overlooked - switching
	between X servers (i.e. from one X VT to another) still requires
	the cooperation of both X servers. I was assuming that KMS
	eliminated this.
	2. It hasn't been tested at all (no X server patch exists which
	uses the new mode).

As he was the original author of the patch, I'll revert it.

Cc: Ari Entlich <atrigent@ccs.neu.edu>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes a sysfs lockdep warning in the ipmi code.

Thanks to Eric Biederman and Yinghai Lu for the original versions of the
patch, unfortunatly they did not submit them in a form they could be
applied in.

Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Replace open-coded loop with for_each_set_bit().
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Bob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

de957628 changed setting of the
x86_init.iommu.iommu_init function ptr only when GART IOMMU is
found.

One side effect of it is that num_k8_northbridges
is not initialized anymore if not explicitly
called. This resulted in uninitialized pointers in
<arch/x86/kernel/cpu/intel_cacheinfo.c:amd_calc_l3_indices()>,
for example, which uses the num_k8_northbridges thing through
node_to_k8_nb_misc().

Fix that through an initcall that runs right after the PCI
subsystem and does all the scanning. Then, remove initialization
in gart_iommu_init() which is a rootfs_initcall and we're
running before that.

What is more, since num_k8_northbridges is being used in other
places beside GART IOMMU, include it whenever we add AMD CPU
support. The previous dependency chain in kconfig contained

K8_NB depends on AGP_AMD64|GART_IOMMU

which was clearly incorrect. The more natural way in terms of
hardware dependency should be

AGP_AMD64|GART_IOMMU depends on K8_NB depends on CPU_SUP_AMD &&
PCI. Make it so Number One!
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20100312144303.GA29262@aftab>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NJoerg Roedel <joerg.roedel@amd.com>

The variable x is initialized twice to the same (side effect-free)
expression.  Drop one initialization.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@

x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>

Stefan observed:

  The next x = rb_entry(mn->next, struct mmtimer, list); is preceded by a
  test whether mn->next is NULL.

  Unless that test is redundant too, your patch fixes a potential NULL
  pointer dereference, introduced by commit cbacdd95 "SGI Altix mmtimer:
  allow larger number of timers per node" in 2.6.26.
Signed-off-by: NJulia Lawall <julia@diku.dk>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This new method can be used to init a new struct tty_ldisc_ops as the
default tty_ldisc_N_TTY struct.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Actually use the slave_addrs module parameter if it is specified, and make
things consistent about passing zero in for the slave address for the
default.
Signed-off-by: NBela Lubkin <blubkin@vmware.com>
Signed-off-by: NCorey Minyard <minyard@acm.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In some cases kipmid can use a lot of CPU.  This adds a way to tune the
CPU used by kipmid to help in those cases.  By setting kipmid_max_busy_us
to a value between 100 and 500, it is possible to bring down kipmid CPU
load to practically 0 without loosing too much ipmi throughput
performance.  Not setting the value, or setting the value to zero,
operation is unaffected.
Signed-off-by: NMartin Wilck <martin.wilck@ts.fujitsu.com>
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Cc: Jean Delvare <jdelvare@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove unneeded initialization in tty_audit_fork().  It is called only via
copy_signal() and is useless after the kmem_cache_zalloc() was used.
Signed-off-by: NVeaceslav Falico <vfalico@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

- fix switch statement layout

- fix whitespace stuff

- fix comment layout

- remove unneeded inlining

- use __weak

- remove trailing whitespace

- move uncached_access() inside `#ifndef __HAVE_PHYS_MEM_ACCESS_PROT' - it
  is otherwise unused.

Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

So as to return a uniform error -EOVERFLOW instead of a random one:

# kmem-seek 0xfffffffffffffff0
seek /dev/kmem: Device or resource busy
# kmem-seek 0xfffffffffffffff1
seek /dev/kmem: Block device required

Suggested by OGAWA Hirofumi.

Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The device driver must allocate memory for IUCV buffers with GFP_DMA,
because IUCV cannot address memory above 2GB (31bit addresses only).

Because the IUCV ignores the higher bits of the address, sending and
receiving IUCV data with this driver might cause memory corruptions.
Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

We want to keep track of the number of buffers added to a vq. Use
nr_added_bufs instead of 'ret'.

Also, the users of fill_queue() overloaded a local 'err' variable to
check the numbers of buffers allocated. Use nr_added_bufs instead of
err.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: NJuan Quintela <quintela@redhat.com>

We declare 'len' as int type but it should be 'unsigned int', as
get_buf() wants it to be.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: NJuan Quintela <quintela@redhat.com>

The USB drivers often want to insert a series of bytes all with the same
flag set - provide a helper for this case.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This new VT mode (VT_PROCESS_AUTO) does everything that VT_PROCESS does
except that it doesn't wait for a VT_RELDISP ioctl before switching
away from a VT with that mode.

If the X server eventually uses this new mode, debugging and crash
recovery should become easier. This is because even when currently in
the VT of a frozen X server it would still be possible to switch out
by doing SysRq-r and then CTRL-<number of a text vt>, sshing in and
doing chvt <number of a text vt>, or any other method of VT switching.
The general concensus on #xorg-devel seems to be that it should be
safe to use this with X now that we have KMS.

This also moves the VT_ACKACQ define to a more appropriate place,
for clarity's sake.
Signed-off-by: NAri Entlich <atrigent@ccs.neu.edu>
Acked-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We allocate during interrupts so while our buffering is normally diced up
small anyway on some hardware at speed we can pressure the VM excessively
for page pairs. We don't really need big buffers to be linear so don't try
so hard.

In order to make this work well we will tidy up excess callers to request_room,
which cannot itself enforce this break up.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We can't change them all but quite a few misuse it.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This was noticed by Matthias Urlichs and he proposed a fix. This patch
does the fixing a different way to avoid introducing several new race
conditions into the code.

The problem case is TTY_DRIVER_RESET_TERMIOS = 0. In that case while we
abort the ldisc change, the hangup processing has not cleaned up and restarted
the ldisc either.

We can't restart the ldisc stuff in the set_ldisc as we don't know what
the hangup did and may touch stuff we shouldn't as we are no longer
supposed to influence the tty at that point in case it has been re-opened
before we get rescheduled.

Instead do it the simple way. Always re-init the ldisc on the hangup, but
use TTY_DRIVER_RESET_TERMIOS to indicate that we should force N_TTY.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The original author didn't realise the kernel lock was a drop while sleep
lock so did clever (and wrong) things to work around the non need to avoid
deadlocks. Remove the cleverness and the comment (as we don't hold the BKL
now anyway in those paths)
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The Nozomi tty handling is very broken on the open/close side (See
http://bugzilla.kernel.org/show_bug.cgi?id=13024 for one example). In
particular it marks the tty as closed on the first close() not on the last.

Most of the logic is pretty solid except for the open/close path so switch
to the tty_port helpers and let them do all the heavy lifting. This is also
fixes all the POSIX behaviour violations in the open/close paths.

Begin by adding the tty port usage
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stanse found a potential null dereference in mgsl_put_char and
mgsl_write. There is a check for tty being NULL, but it is
dereferenced earlier.

Actually, tty cannot be NULL in .write and .put_char, so remove
the tests.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stephen Rothwell found the following warning (x86_64 allmodconfig):

drivers/char/ip2/ip2main.c:511: warning: 'ip2_setup' defined but not used

This patch adds module parameter to fix the above warning.
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On the kernel command line we can pass "module parameters".  So #ifdef
MODULE is obsolute now.  Remove it completely.  When CONFIG_PCI=n and
building ip2main.c then we are hit by the following warning.  So move
*pdev into #ifdef CONFIG_PCI.

drivers/char/ip2/ip2main.c: In function `ip2_loadmain':
drivers/char/ip2/ip2main.c:542: warning: unused variable `pdev'
Signed-off-by: NRakib Mullick <rakib.mullick@gmail.com>
Acked-by: NMichael H. Warfield <mhw@WittsEnd.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We can pass "module parameters" on the kernel command line even when
!MODULE.  So, #ifdef MODULE becomes obsolete.  Also move the declaration
moxa_board_conf at the start of the function, since we were hit by the
following warning.

drivers/char/moxa.c: In function `moxa_init':
drivers/char/moxa.c:1040: warning: ISO C90 forbids mixed declarations and code

Signed-off-by: Rakib Mullick<rakib.mullick@gmail.com>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

vtermnos[] is unsigned, so this test was wrong.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Convert printks to pr_<level>
Convert some embedded function names to %s...__func__
Remove a period after exclamation points.
Remove #define pr_dbg which could be used by future kernel.h includes
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Stanse found unnecessary test in mxser_startup.

tty is dereferenced earlier, the test is superfluous. Remove it.
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

With gcc 4.0.2:
drivers/char/cyclades.c: In function 'cyy_interrupt':
drivers/char/cyclades.c:581: warning: 'info' may be used uninitialized in this function

introduced by

: commit 3aeea5b9
: Author:     Jiri Slaby <jirislaby@gmail.com>
: AuthorDate: Sat Sep 19 13:13:16 2009 -0700
: Commit:     Live-CD User <linux@linux.site>
: CommitDate: Sat Sep 19 13:13:16 2009 -0700
:
:    cyclades: introduce cyy_readb/writeb

In fact the true branch which uses uninitialized 'info' can never
happen because chip is always less than ->nchips and channel is
always less than 4 which we alloc.

So behave similar to rx handling and remove the test completely.

I wonder why gcc 4.4.1 doesn't spit a word.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: NJiri Slaby <jslaby@novell.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix transmit bug that could drop send data if write() called close to
serial transmitter going idle after sending previous data.  Bug is caused
by incorrect use of device information member tx_count.

Driver originally processed one data block (write call) at a time, waiting
for transmit idle before sending more.  tx_count recorded how much data
was loaded in DMA buffers on write(), and was cleared on send completion. 
tx_count use was overloaded to record accumulated data from put_char()
callback when transmitter was idle.

A bug was introduced when transmit code was reworked to allow multiple
blocks of data in the tx DMA buffers which keeps transmitter from going
idle between blocks.  tx_count was set to size of last block loaded,
cleared when tx went idle, and monitored to know when to restart
transmitter without proper synchronization.  tx_count could be cleared
when unsent data remained in DMA buffers and transmitter required
restarting, effectively dropping unsent data.

Solution:
1. tx_count now used only to track accumulated data from put_char
2. DMA buffer state tracked by direct inspection of descriptors
   with spinlock synchronization
3. consolidate these tasks in tx_load() :
   a. check for available buffer space
   b. load buffers
   c. restart DMA and or serial transmitter as needed
   These steps were previously duplicated in multiple places,
   sometimes incompletely.
4. fix use of tx_count as active transmit indicator,
   instead using tx_active which is meant for that purpose
Signed-off-by: NPaul Fulghum <paulkf@microgate.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Trivial patch which adds the __init macro to the module_init
function and all of its helper functions of drivers/char/vme_scc.c
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

See http://bugzilla.kernel.org/show_bug.cgi?id=15021

Make sure that the appropriate AGP module is loaded and probed before
trying to set up the DRM.  The DRM already depends on the AGP core,
but in this case we know the specific AGP driver we need too, and can
help users avoid the trap of loading the AGP driver after the DRM
driver.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NEric Anholt <eric@anholt.net>

New memory control config reg at 0x50 should be used for stolen
memory size detection on Sandybridge.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>