- 10 10月, 2007 40 次提交
-
-
由 Trond Myklebust 提交于
Call it from call_verify() instead... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
It completely fouls up the RPC call statistics, and serves no useful purpose. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
xs_sendpages() may return a negative result. We sure as hell don't want to add that to the 'tk_bytes_sent' tally... Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Adrian Bunk 提交于
This patch makes the needlessly global struct rpcb_program static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Use correct type signage in gss_krb5_remove_padding() when doing length calculations. Both xdr_buf.len and iov.iov_len are size_t, which is unsigned; so use an unsigned type for our temporary length variable to ensure we don't overflow it.. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Since 43780b87..., rpc_create() fills in a default hostname based on the ip address if the servername passed in is null. A small typo made that default incorrect. (But this information appears to be used only for debugging right now, so I don't believe the typo causes any bugs in the current kernel.) Thanks to Olga Kornievskaia for bug report and testing. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Cc: Olga Kornievskaia <aglo@citi.umich.edu> Cc: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
On the client, when an alternate server port is specified on the mount commandline, we need to make sure gssd knows about it. Also, on the server side, when we're sending krb5 callbacks to the client, we'll use the same mechanism to let gssd know about the callback port. Thanks to Olga Kornievskaia for testing and for an earlier implementation. Signed-off-by: N"J. Bruce Fields" <bfields@citi.umich.edu> Cc: Olga Kornievskaia <aglo@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
NFS performance metrics reported zero bytes sent per op when mounting with UDP. The UDP socket transport wasn't properly counting the number of bytes sent. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
This implements the interface from rpcrdma to the RDMA verbs interface supported by Infniband and iWARP. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NJames Lentini <jlentini@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
This implements the marshaling and unmarshaling of the rpcrdma transport headers. Connection management is also addressed. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
This implements the configuration and building of the core transport switch implementation of the rpcrdma transport. Stubs are provided for the rpcrdma protocol handling, and the infiniband/iwarp verbs interface. These are provided in following patches. Signed-off-by: NTom Talpey <talpey@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
Instead of an { address family, raw IP protocol number }-tuple, use the newly-defined RPC identifier when creating clients in the upper layers. Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
To prepare for including non-sockets-based RPC transports, select RPC transports by an identifier (to be used in following patches). Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
To prepare for including non-sockets-based RPC transports, move the sockets-dependent definitions into their own file. Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
To prepare for including non-sockets-based RPC transports, change the overly suggestive name of the transport creation arguments struct. Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
Allow RPC client transport implementations to be loaded as needed, or as they become available from distributors or third-party vendors. Note that we leave the IP sockets implementation in sunrpc.o permanently, as IP functionality is always available in any kernel that runs NFS. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
To allow transport capabilities to be loaded dynamically, provide an API for registering and unregistering the transports with the RPC client. Eventually xprt_create_transport() will be changed to search the list of registered transports when initializing a fresh transport. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions As a preface to allowing arbitrary transport modules to be loaded dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions that a transport implementation might want to use. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Acked-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
Adds a flag word to the xdrbuf struct which indicates any bulk disposition of the data. This enables RPC transport providers to marshal it efficiently/appropriately, and may enable other optimizations. Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
The rpcbind (v3+) netid is provided by each RPC client transport. This fixes an omission in IPv6 rpcbind client support, and enables future extension. Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 \"Talpey, Thomas\ 提交于
Move the TCP/UDP rpcbind netid's from the rpcbind client to a global header. Signed-off-by: NTom Talpey <tmt@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
The purpose of an RPC ping (a NULL request) is to determine whether the remote end is operating and supports the RPC program and version of the request. If we do an RPC bind and the remote's rpcbind service says "this program or service isn't supported" then we have our answer already, and we should give up immediately. This is good for the kernel mount client, as it will cause the request to fail, and then allow an immediate retry with different options. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add more new error code processing to the kernel's rpcbind client and to call_bind_status() to distinguish two cases: Case 1: the remote has replied that the program/version tuple is not registered (returns EACCES) Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT) This change allows more specific error processing for each of these two cases. We now fail case 2 instead of retrying... it's a server configuration error not to support even rpcbind version 2. And don't expose this new error code to user land -- convert it to EIO before failing the RPC. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add new error code processing to the kernel's rpcbind client and to call_bind_status() to distinguish two cases: Case 1: the remote has replied that the program/version tuple is not registered (returns -EACCES) Case 2: another process is already in the middle of binding on this transport (now returns -EAGAIN) This change allows more specific retry processing for each of these two cases. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
When a server returns a bad rpcbind reply, make rpcbind client recovery logic retry with an older protocol version. Older versions are more likely to work correctly. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Add better sanity checking of server replies to the GETVERSADDR reply decoder. Change the error return code: EIO is what other XDR decoding routines return if there is a failure while decoding. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’: /home/cel/linux/net/sunrpc/clnt.c:1538: warning: signed and unsigned type in conditional expression This points out another case where a conditional expression returns a signed value in one arm and an unsigned value in the other. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Check the length of the passed-in server name before trying to print it in the log. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Noticed by Tom Talpey <tmt@netapp.com>: OBTW, there's a nit on that memcpy, too. The r_addr is an array, so memcpy(&map->r_addr is passing the address of the array as a char **. It's the same as map->r_addr, but technically the wrong type. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’: /home/cel/linux/net/sunrpc/clnt.c:445: warning: comparison between signed and unsigned RPC version numbers are u32, not int. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Remove one of two identical dprintk's that occur when an RPC client is created. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Fix some problems with rpcbind v3 and v4 queries from the in-kernel rpcbind client: 1. The r_addr argument must be a full universal address, not just an IP address, and 2. The universal address in r_addr is the address of the remote rpcbind server, not the RPC service being requested This addresses bugzilla.kernel.org report 8891 for 2.6.23-rc and greater. In addition, if the rpcbind client is unable to start the rpcbind request, make sure not to leak the xprt. Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Chuck Lever 提交于
"Universal addresses" are a string representation of an IP address and port. They are described fully in RFC 3530, section 2.2. Add support for generating them in the RPC client's socket transport module. Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Finalize support for setting up RPC client transports to remote RPC services addressed via IPv6. Based on work done by Gilles Quillard at Bull Open Source. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clone separate connect worker functions for connecting AF_INET6 sockets. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Prepare for introduction of IPv6 versions of same. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Finishing a socket connect is the same for IPv4 and IPv6, so split it out into a helper. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Chuck Lever 提交于
Clone xs_bindresvport into two functions, one that can handle IPv4 addresses, and one that can handle IPv6 addresses. Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-