- 13 2月, 2014 8 次提交
-
-
由 Amitkumar Karwar 提交于
In extended scan, host gets scan results through one or multiple events instead of scan command response. Host will send next scan command when all the events are received. Legacy scan sometimes truncates scan results in a noisy environment due to buffer length limitation. This issue is addressed in extended scan. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
This new function will be useful later for extended scan feature. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
This new function will be useful later for extended scan feature. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
'mwifiex_bcn_param' structure contains five parameters which are present in beacon buffer in case of legacy scan. 'rssi' field won't be there in this buffer for extended scan. Hence 'bssid' and 'rssi' are removed from the structure and it is renamed as 'mwifiex_fixed_bcn_param' so that we can have common parsing logic later for both. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
bit12 in fw_cap_info is for testing only. Remove all related code. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
1) rename max_mcs to mcs; 2) initialize 'i' and 'nss' as 1 instead of 0 in nss lookup; 3) use GET_VHTNSSMCS(mcs_map, nss) macro; 4) use IEEE80211_VHT_MCS_* definitions instead of hard coding Reported-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Remove these local array variables and define them as static const array in global space. The duplicated mcs_rate table is removed automatically with this change. Reported-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Remove driver's macro and use ieee80211's definition instead Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 2月, 2014 3 次提交
-
-
由 Antonio Quartulli 提交于
When receiving an IBSS_JOINED event select the BSS object based on the {bssid, channel} couple rather than the bssid only. With the current approach if another cell having the same BSSID (but using a different channel) exists then cfg80211 picks up the wrong BSS object. The result is a mismatching channel configuration between cfg80211 and the driver, that can lead to any sort of problem. The issue can be triggered by having an IBSS sitting on given channel and then asking the driver to create a new cell using the same BSSID but with a different frequency. By passing the channel to cfg80211_get_bss() we can solve this ambiguity and retrieve/create the correct BSS object. All the users of cfg80211_ibss_joined() have been changed accordingly. Moreover WARN when cfg80211_ibss_joined() gets a NULL channel as argument and remove a bogus call of the same function in ath6kl (it does not make sense to call cfg80211_ibss_joined() with a zero BSSID on ibss-leave). Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Bing Zhao <bzhao@marvell.com> Cc: Jussi Kivilinna <jussi.kivilinna@iki.fi> Cc: libertas-dev@lists.infradead.org Acked-by: NKalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com> [minor code cleanup in ath6kl] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
This required liberally sprinkling 'const' over brcmfmac and mwifiex but seems like a useful thing to do since the pointer can't really be written. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Jouni Malinen 提交于
Addition of the frequency hints showed up couple of places in cfg80211 where pointers could be marked const and a shared function could be used to fetch a valid channel. Signed-off-by: NJouni Malinen <j@w1.fi> [fix mwifiex] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 24 1月, 2014 1 次提交
-
-
由 Andreas Fenkart 提交于
8 bytes preamble 14 bytes src/dst/eth_type 6 bytes 0xff:0xff.. http://en.wikipedia.org/wiki/Wake-on-LAN#Magic_packet http://en.wikipedia.org/wiki/EtherType This will fail if we VLAN or the magic packet is encapsulated as a UDP packet... Signed-off-by: NAndreas Fenkart <afenkart@gmail.com> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 17 1月, 2014 2 次提交
-
-
由 Ujjal Roy 提交于
While registering the driver with cfg80211, update the threshold value and retry limit to cfg80211. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
bit 14 is actually reserved and bit 12 & 13 should be used for 11ac capability in fw_cap_info. Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 14 1月, 2014 2 次提交
-
-
由 Amitkumar Karwar 提交于
It is u64 data received from firmware. Little endian to cpu conversion is required here. Cc: <stable@vger.kernel.org> # 3.5+ Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Adding new device IDs and assigning generic function/variable names instead of using device-id specific names. Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NNishant Sarmukadam <nishants@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NFrank Huang <frankh@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 11 1月, 2014 1 次提交
-
-
由 Jason Wang 提交于
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2014 2 次提交
-
-
由 Bing Zhao 提交于
Instead of having two copies of the code for device tree cfgdata downloading, add a function to improve the code. Reviewed-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
If cfgdata length exceeds the command buffer size we will end up getting buffer overflow problem. Fix it by checking the buffer size less the command header length. Reviewed-by: NPaul Stewart <pstew@chromium.org> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 27 12月, 2013 1 次提交
-
-
由 dingtianhong 提交于
Use possibly more efficient ether_addr_equal instead of memcmp. Cc: Bing Zhao <bzhao@marvell.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 12月, 2013 5 次提交
-
-
由 Kyeyoon Park 提交于
This allows QoS mapping from external networks to be implemented as defined in IEEE Std 802.11-2012, 10.24.9. APs can use this to advertise DSCP ranges and exceptions for mapping frames to a specific UP over Wi-Fi. The payload of the QoS Map Set element (IEEE Std 802.11-2012, 8.4.2.97) is sent to the driver through the new NL80211_ATTR_QOS_MAP attribute to configure the local behavior either on the AP (based on local configuration) or on a station (based on information received from the AP). Signed-off-by: NKyeyoon Park <kyeyoonp@qca.qualcomm.com> Signed-off-by: NJouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Bing Zhao 提交于
When driver gets regulatory domain change notifications or before associates to an AP with Country IE, the txpwrlimit table stored in device tree for that country is downloaded to firmware. The txpwrlimit downloading will happen only at the first time when the alpha2 country code is changed. World regulatory domain "00" notification doesn't trigger the downloading. This behavior is same as domain_info command. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Currently only conf file based cal-data downloading is supported. On embedded platforms a better place to store the cal-data is in device tree. Add cal-data downloading from device tree to firmware. Both methods can co-exist. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
The cfg_data buffer will include the cfg_data structure header (action, type, data_len). This makes it work for all data types without extra parsing. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
On cfg80211 regulatory domain change, drivers gets alpha2 country code or "00" in driver's notification handler. In most cases, the pattern will be US, 00, US, 00, US, 00, US, ... There is no need to send domain info to firmware in case of "00" or with the same alpha2 country code. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 10 12月, 2013 11 次提交
-
-
由 Ujjal Roy 提交于
When TX data URB reaches high water mark the message "data: -ENOSR is returned" is printed. This is not an error case, so change it to debug print. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
The check for 'priv' pointer is redundant. 'priv' won't be used later in this routine. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ujjal Roy 提交于
The bridged packets are updated to statistics on both TX and RX paths. Also fix a typo in the comment. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ujjal Roy 提交于
The skb is modified in sending the TX packet. Save the original packet length to a variable so that we can get the correct statistics update. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ujjal Roy 提交于
The skb is modified in processing the RX packet. Save the original packet length to a variable so that we can get the correct statistics update. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ujjal Roy 提交于
RX packets are handled in different paths. Not all paths have decrement of rx_pending counter. This patch fixes the counter imbalance. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
eth_hdr is defined in kernel. Use a different variable name in our functions. Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
SNAP/LLC header in the AARP packet is being stripped off while preparing an EthernetII header. Annex M, Table M.3 in 802.11 spec says that some header (ex. AppleTalk AARP(2)) should pass through untouched. This patch modifies the check to exclude/include EthernetII header translation for special cases. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Use 'rfc1042_header' available in net/wireless/util.c Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Amitkumar Karwar 提交于
Actually we are updating snap_type with h_proto (__be16 variable) in ethernet frame header. Hence endianness conversion is not required. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ujjal Roy 提交于
The firmware expects the command structure members in little endianness. Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 06 12月, 2013 1 次提交
-
-
由 Amitkumar Karwar 提交于
1) Move common code out of switch case handling 2) Return from the function if number of bytes left in response buffer are less than tlv size 3) Pass pg_tlv_hdr directly instead of txp_cfg to mwifiex_get_power_level() Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 05 12月, 2013 1 次提交
-
-
由 Janusz Dziedzic 提交于
Rename NL80211_TXRATE_MCS to NL80211_TXRATE_HT and also rename mcs to ht_mcs in struct cfg80211_bitrate_mask. Signed-off-by: NJanusz Dziedzic <janusz.dziedzic@tieto.com> [reword commit message] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 02 12月, 2013 1 次提交
-
-
由 Andrei Otcheretianski 提交于
Change cfg80211 and mac80211 to use cfg80211_mgmt_tx_params struct to aggregate parameters for mgmt_tx functions. This makes the functions' signatures less clumsy and allows less painful parameters extension. Signed-off-by: NAndrei Otcheretianski <andrei.otcheretianski@intel.com> [fix all other drivers] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 26 11月, 2013 1 次提交
-
-
由 Ujjal Roy 提交于
For IBSS join if the requested SSID matches current SSID, it returns without freeing the allocated beacon IE buffer. Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by: NUjjal Roy <royujjal@gmail.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-